• 한국환경보건학회지
• /
• 제37권4호
• /
• pp.315-322
• /
• 2011

Objectives: Organic matter and nitrogen were removed using the EGSB process, a high-rate anaerobic process, in combination with a nitritation-denitritation process, in order to ensure the stable treatment of seafood processing wastewater. Methods: The upflow velocity of an EGGS reactor was operated at 10 m/hr for maximal organics removal efficiency. For removal of nitrogen from seafood processing wastewater a nitritation-denitriation process was applied Results: The efficiency of the EGSB process showed that it has an 80% or more organic matter (CODcr) removal efficiency with an HRT of six hours or more at influent loadings of 17.34 kgCOD/$m^3$/day or less. The methane product for TCODcr removal was 0.23-0.38 $m^3CH_4$/kgCODrem., which was similar to the theoretical generation of STP-state methane, 0.35 $m^3CH_4$/kgTCODrem. In the nitritation-denitritation process, the nitritation conversion rate to $NH_4^+$-N concentration was 82% to 87%, 72% to 81% and 64% to 69% when HRT was 24 hr, 21 hr and 18 hr, respectively. In the denitritation process, the ratio of SCOD consumption to NOx-N removal ranged from 2.347 to 2.587. It was 2.472 on average. Conclusions: The optimal HRT for stable processing of seafood processing wastewater is six hours or more. The ratio of nitrite to total NOx-N was 82% to 96%, which indicates that nitrite accounts for the largest portion of the product.

• 대한환경공학회지
• /
• 제36권8호
• /
• pp.579-587
• /
• 2014

수계에서 검출되는 미량유해물질의 빈도와 종류가 다양해지고 있다. 따라서 정수처리시스템에서 고려되어야 할 부분으로 거론되고 있으며 제거공정과 처리효율에 대한 연구가 활발하게 진행되고 있다. 본 연구에서는 고도처리공정과 나노여과공정을 이용한 제거효율을 평가하였다. 나노여과공정의 경우 물질의 물리화학적 특성에 따라 제거율이 상이하게 나타났다. 물질의 분획분자량이 제거율이 가장 큰 영향을 미치는 것으로 확인되었다. 또한, 원수의 pH보다 높은 pKa 값을 갖거나 Log Kow 값이 2 이하인 물질의 제거효율이 감소되었다. 고도처리공정 중 산화공정에서는 대상물질의 분자량이 클수록 그리고 소수성을 띌수록 산화반응에 의한 제거효율이 감소되었다. 흡착공정에서는 산화되지 않은 대부분의 물질이 제거되었으며 $H_2O_2$에 의하여 산화가 더 잘 진행될수록 흡착반응이 향상되었다.

• 한국습지학회지
• /
• 제14권4호
• /
• pp.629-635
• /
• 2012

본 연구는 부영양화 호소의 개선을 위하여 분말활성탄 공정을 적용하고 호소수 내의 용존 유기물과 인의 제거특성을 파악하고자 수행되었다. 용존 유기물의 제거특성은 부유물질의 제거특성과 다르며 응집제 주입량과 pH에 영향을 받음을 확인하였다. 용존 유기물은 분말활성탄에 의해 흡착으로 제거되며 응집과정에서 용존 유기물의 제거효율을 증가시킬 수 있었다. 응집침전공정의 인 제거 과정과 같은 화학침전과정에서 형성되는 용존성 착화합물과 콜로이드성 물질은 인의 제거효율을 저하시키는 요인이다. 분말활성탄의 주입으로 콜로이드성 물질과 용존성 착화합물을 흡착함으로써 인의 제거효율을 증가시킬 수 있었다. 또한 분말활성탄은 응집과정의 floc의 밀도를 증가시켜 침전속도를 높이고 고액분리 효율을 높일 수 있었다.

• 상하수도학회지
• /
• 제11권1호
• /
• pp.64-73
• /
• 1997

Most of the municipal wastewater treatment plants operated in Korea are designed for high concentrations municipal sewage. However, activated sludge process employed by municipal wastewater treatment plant is operated at low organic loading. The objective of this study was to determine optimum operating condition of activated sludge process for treatment of low concentration municipal sewage. Three bench scale activated sludge reactors were operated to investigate the effect of HRT and SRT on the COD and TSS removal efficiency. The average concentration of TSS, SCOD, SBOD and TKN in influent were 118mg/l, 61mg/l, 21mg/l, and 12mg/l, respectively. The activated sludge reactors operated with various HRT and SRT showed about 89-93% TSS removal efficiency. HRT and SRT does not affect the TSS removal efficiency of actvatied sludge process significantly. However, HRT affected the SCOD removal efficiency slightly. As the HRT decreases from 13hours to 3hours, the SCOD removal efficiency decreases from 67% to 56%. The average effluent TCOD concentration of the reactor operated with 3hours of HRT was approximatly 40-45mg/l. Kinetic coefficient yield (Yt) and decay coefficients(Kd) were 0.594-0.954 mgMLVSS/mgCOD and $0.0197-0.0317day^{-1}$, respectively. Low concentration municipal sewage can be treated with 3 hours of HRT without effluent quality deterioration and SRT does not affect the substrate removal efficiency at this operation condition.

• 청정기술
• /
• 제3권2호
• /
• pp.31-33
• /
• 1997

Nitrate contamination in surface water and ground water have increased in Korea. This trend has raised concern because nitrates caused methemoglobinemia in infants. To remove nitrates from waters, various purification processes including ion-exchange, biological denitrification, and chemical denitrification are currently in use for the treatment of water. However, little economically advantageous process exists for the industrial scale treatment of effluents highly polluted with nitrates. A new process has been developed for nitrate and other salts removal from polluted waters. Alumina cement and lime served as precipitating agents to remove nitrate with stirring at basic pH. Decreasing alumina content in alumina cement result in a increasing in nitrate removal yield. Stable removal of nitrate(1000mg/L) was readily achieved by two-stage removal process.

• 한국물환경학회지
• /
• 제16권4호
• /
• pp.533-539
• /
• 2000

A bench-scale reactor using SBR process was experimented with an synthetic wastewater. The main purpose of this investigation was to evaluate applicability in the field and process removal efficiencies in terms of BOD and T-P and its corresponding kinetic parameters. Removal rate of phosphorus was 77% in terms of total phosphorus. Effluent concentrations were $9.8mg/{\ell}$ BOD and $1.1mg/{\ell}$ T-P. Effluent quality was maintained consistently stable by controlling decant volume and operating cycles. The efficiency for phosphorus removal was increased due to decrease in BOD-SS loading value in the range of $0.25{\leq}$aeration time ratio${\leq}0.52$.

• 한국응용과학기술학회지
• /
• 제22권1호
• /
• pp.62-70
• /
• 2005

Step-feed process for biological nitrogen removal were analyzed numerically for the each unit and final total nitrogen(TN) effluent by water quality management(WQM) model and the results were compared data from these wastewater treatment plants. No bugs and logic error were occurred during simulation work. All of the simulation results tried to two times were obtained and both results were almost same as this model has become good reappearance. It was concluded that most of nitrogen removal occurred in the first oxic tank. Thus the controlling of the first anoxic tank may be more important in term of nitrogen removal. Also each unit of simulation result was kept good relationship with that of measured data. Accordingly this WQM model has good reliance. Finally, WQM model can predict final TN effluent within ${\pm}6.0mg/{\ell}$.

• 미생물과산업
• /
• 제19권4호
• /
• pp.2-13
• /
• 1993

Some microorganisms, including actinomycetes, cyanobacteria, and other bacteria, algae, fungi, and yeast, can accumulate and retain relatively high quantities of heavy metals and radionuclides from their external environments (1-4). Both living and dead cells can be used for biosorptive metal/radionuclide removal from solution. Thus microorganisms and products excreted by or derived from microbial cells (2) may provide an alternative or adjunct to conventional techniuqes of metal removal and recovery. Recent approaches have separated the microbial growth and metal removal process to manipulate production of metal-adsorptive capacity of bacteria and metal removal process. If pre-grown cells are immobilized and used for metal removal, mathematical modeling can be applied to predict immobilized cell reactor behavior under specific process conditions. Waste and microbial adsorbent could be separated from the treated flow in one step. Once treated, the metal waste is concentrated in a small volume of sorbed form for easy metal disposal or recovery.

• 한국환경과학회지
• /
• 제22권11호
• /
• pp.1383-1388
• /
• 2013

The pilot plant experiment was performed to investigate phosphorus and nitrogen removal from domestic wastewater by MLE process combined with aluminum corrosion reactor. When operating 0.5Q and 1Q to internal recycle and sludge recycle in the MLE process, the effluent $COD_{Mn}$ concentration of internal recycle 0.5Q were higher than internal recycle 1Q, the removal efficiency rates of $NH_3$-N in the internal recycle 0.5Q were was higher than internal recycle 1Q. Denitrification rates were about 86.8% in internal recycle and sludge recycle 0.5Q. When operating 0.5Q to internal recycle and sludge recycle in the MLE process, the removal efficiency rates of total nitrogen was the highest. The removal efficiency rates of total phosphorus was about 91.5% in the aluminum corrosion reactor.

• 대한의용생체공학회:의공학회지
• /
• 제16권1호
• /
• pp.67-76
• /
• 1995

Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd: YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as BrJ, and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased. To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained.