• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2140-2146
• /
• 2014

Ocean buoys are operated for safe navigation and collecting ocean data. Recently, to reducing marine buoy's damage by ocean weather's bad condition and collision with vessels has been conducted in several field research. This paper's experiment is buoy condition monitoring about predefined data form by users. As a result using Wireless remote control board applying a radio signal processing algorithms, it can observe buoy's state at an interval of three minutes on the land. Acquired data type is changeable according to ocean weather condition or buoy's purpose of using in advance. Also, this paper conducted an experiment such as data-transmission's stability and wireless communication's availability. As results of the analysis of the transmitted data, the solar, wind and wave power indicates the maximum amount of power, 50 W, 20 W and 40 W respectively. The communication system proven through this research can apply to buoy or other ocean facility.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.688-689
• /
• 2011

본 논문에서는 배전지능화시스템과 정보 연계, 미래 지능형전력망 운용 및 태양광, 풍력, 연료전지등과 같은 신 에너지전원의 단지를 효율적으로 유지관리하기 위하여, 유 무선 네트워크 구성요소의 특성을 해석하고, 이를 바탕으로 원격 감시제어장치를 제작하였다. 이 감시제어장치는 한국기술교육대학교 캠퍼스 내에 설치되어 있는 50KW급 태양광전원장치를 대상으로 유 무선 네트워크 알고리즘을 기반으로 제작한(AutoBase) 감시장치, PLC를 이용한 제어장치로 구성된다. 본 연구에서 제안한 장치를 이용하여 태양광전원의 출력특성을 분석한 결과, 원격지에 설치된 대규모 태양광단지의 보수유지 관리에 필요한 유무선 네트워크를 이용한 원격감시제어기술의 대안으로, 스마트그리드 구축에 기여할 수 있음을 확인하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.434-439
• /
• 2002

A diagnostic methodology, which utilizes only the remotely-measurable signals, has been requested to be developed in order to evaluate and monitor conditions of MOVs. It is proven that the stem thrust are the most important variables which provide the operability of MOVs. Therefore the stem thrust estimator was developed and validated, which estimates stem thrust by use of the motor torque. The motor torque is calculated using electrical signals which can be measured in Motor Control Center(MCC). The procedures to evaluate the accuracy of the diagnostic variables were set up and the accuracy of each variable was obtained through the experiments under various conditions. In addition, the applicability of the stem thrust estimator was tested in the plants.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.25.6-25
• /
• 2001

A new monitoring system is proposed to give direct visual information of the remote site when working with a tele-operation system. In order to have a similar behavior of a human when he is inspecting an object, multiple cameras that have different view point are attached around the robot hand and are switched on and elf according to the operator´s motion such as joystick manipulation or operator´s head movement. The performance of the system is estimated by performing comparison experiments among single camera (SC) vision system, head mount display (HMD)system and proposed multiple camera (MC) vision system by applying a task to several examines. The reality, depth feeling and controllability are estimated for the examines ...

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.3-6
• /
• 2011

본 논문에서는 배전지능화시스템과의 정보연계, 미래 지능형전력망 운용 및 태양광, 풍력, 연료전지 등과 같은 신에너지전원의 단지를 효율적으로 유지, 관리하기 위하여, 유 무선 네트워크를 이용하여 원격 감시제어장치를 제작하였다. 이 장치는 한기대 캠퍼스 내에 설치되어 있는 50KW급 태양광전원을 대상으로 1km 정도 떨어져 있는 그린에너지연구실에서 유무선 네트워크를 이용하여 실시간으로 출력되는 전압, 전류데이터를 무선네트워크로 장거리 전송하여, HMI 프로그램인 AutoBase로 실시간 모니터링 하도록 제작하였다. 앞으로 본 논문에서 제안한 원거리 감시제어 장치를 이용하여 원거리에 위치한 대규모 태양광발전단지의 데이터를 무선네트워크 기술로 전송받아 보구슈지를 수행할 수 있는 기반을 마련하였다.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2543-2545
• /
• 2002

There are many applicable services such as remote metering, load control, distribution line automation, Pole transformer Monitoring having their own networks in the electric power company. The application of the optical network technology as the back-born network to the Automation Systems in KEPCO is potentially beneficial in reliability, speed, and expandability. The 1-core and 2-core optical modems were developed and used by the Distribution Automation System. But, They had some disadvantages and advantages. So, We designed the new optical modems applied each advantages. This paper presents some of design efforts and test results for the multi-channel optical modem at KRPRI.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.10
• /
• pp.126-133
• /
• 2008

Computer and communication of based IT technology use to das that remote control, monitoring, measuring automatic gas switch, recloser located far about $20{\sim}30[km]$. For increasing efficiency billing, metering of high voltage customer use to amr system. If between das and amr interface operate when generated fault in high voltage electric equipment of customer part, amr system serve to das quickly in fault information data, correct fault location.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.53 no.2
• /
• pp.77-81
• /
• 2004

In this paper, multi-functional measurement module for RTD and 4-20mA Analog input is presented. As you know, In many industry field, RTD has been used for measuring a temperature. Although It have good properties such as wide measurement range, accuracy, the hardware or software compensation methods were applied to better linearity in many applications. According to this paper, a simply approximation method and various measuring technique are proposed to compensate large lead's resistance influence in RTD temperature measurements. As the experiment and simulation results, it is proved that the proposed method has good performance of measuring temperature. Additionally, with the CAN based communication, remote monitoring and parameter setting functions are realized.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.1-6
• /
• 2014

Companies almost don't use an integrated control system using expensive network system in multimedia like TV and DID, despite IP-Broadcasting and communication equipment have expanded rapidly. The proposed integrated TCU(terminal control unit) is a control device that supports TV power On/Off check and remote control, power control reservation function, TV channel change, a variety of interface supports of input/output AC power & Lan port, RS-232C and IR using existing IP network after there is installed the Wake-on -Lan in the set-top box. The TCU can control and monitor 24 hours unlike existing low-cost control system RF method. In existing control equipment markets without expandability and low price, the TCU development including 24 hours monitoring and automatic control functions is expected to secure a wide range of companies.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.346.2-346
• /
• 2002

A diagnostic methodology, which utilizes only the remotely-measurable signals, has been requested to be developed in order to evaluate and monitor conditions of MOVs. It is proven that the stem thrust are the most important variables which provide the operability of MOVs. Therefore the stem thrust estimator was developed and validated, which estimates stem thrust by use of the motor torque. The motor torque is calculated using electrical signals which can be measured in Motor Control Center(MCC). (omitted)