• 한국산학기술학회논문지
• /
• 제20권6호
• /
• pp.86-94
• /
• 2019

본 논문은 보다 높은 실재감과 안전성을 확보하기 위한 무인차량 원격주행제어 환경 개발에 대한 내용을 설명한다. 주로 무인차량 원격주행제어를 위한 환경은 조이스틱 형태의 장치를 활용하여 조향과 가/감속이 가능하도록 개발되어 사용되었다. 그 외 일반 차량처럼 간이 조향-휠(steering-wheel)을 기반으로 개발된 시뮬레이터 환경도 있으나, 현재 주행 상황을 피드백하는 기술이 적용되어 있지 않거나 가/감속부를 포함하지 않는 것이 대부분이다. 피드백 기술이란 일반 차량을 직접 운전할 때 조향-휠과 가/감속 페달을 통해 느껴지는 현재 주행 상황을 시뮬레이터 환경에 구현하는 것을 의미한다. 이렇듯 무인차량 원격주행제어에 이질감을 감소시키는 피드백 기술 개발과 더불어 실재감을 높일 수 있는 시뮬레이터 환경 구축이 필수적이다. 따라서 본 연구에서는 선행 연구를 통해 개발된 힘반향 햅틱제어 기술을 적용할 수 있는 시뮬레이터 환경을 구축하고 시뮬레이터 하드웨어의 최소 요구사양을 도출하는 연구를 수행하였다. 하드웨어 구성은 일반 차량과 유사한 조향-휠 모듈과 가/감속 페달 모듈로 구성하였으며, 조향부와 가/감속부 모두 피드백 기술을 적용할 수 있도록 별도의 액추에이터를 설치하였다. 또한 제어부 PC를 통해 두 가지 조작부에 피드백 명령을 전달할 수 있도록 CAN(controller area network) 통신 환경을 구성하였다. 이렇게 구성한 시뮬레이터 환경의 성능을 검증하기 위하여 기 개발된 힘반향 햅틱제어 알고리즘을 직접 적용하여 각 상황 별 알고리즘 동작을 평가하였다.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.120-129
• /
• 2001

As many sensors and actuators are used in many automated systems, various industrial networks are adopted for real-time distributed control. In order to take advantages of the networking, however, the network implementation should be carefully designed to satisfy real-time requirements considering network delays. This paper presents the implementation of a remote feedback control system via Profibus-DP net work for real-time distributed control More specifically, the effect of the network delay on the control performance evaluated on Profibus-DP testbed. Also, the traditional PID gain tuning methods are used to demonstrate the feasibility of the remote feedback control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.92-94
• /
• 2007

This paper considers an optimal control problem for a remote control to an electrical drive system with a DC motor. Since it is a linear control system with time-delay subject to unknown but bounded disturbance, we construct a worst-case feedback control policy. This policy can guarantee that, for all admissible uncertain disturbances, the real system state should be in a prescribed neighborhood of a desired value, and the cost functional takes the best guarantee value. The worst-case feedback control policy is allowed to be corrected at one correction point between the initial to the final time, which is equivalent to solving a 1-level min-max problem. Since the min-max problem at the stage does not yield a simple analytical solution, we consider an approximate control policy, which is equivalent and can be solved explicitly m the numerical experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.116.5-116
• /
• 2002

In remote control of telerobotics equipment, the real-time visual feedback is necessary in order to facilitate real-time control. Because of the network congestion and the associated delays, the real-time image feedback is generally difficult in the public networks like internet. If the remote user is not able to receive the image feedback within a certain time, the work performance may tend to decrease, and it makes difficulties to control of the telerobotics equipment. In this paper, we propose an improved visual feedback scheme over the internet for telerobotics system. The size of a remote site image and its quality are adjusted for efficient transmission. The constructed system has a be...

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1637-1645
• /
• 2004

In remote control of telerobotics equipment, the real-time visual feedback is necessary in order to facilitate real-time control. Because of the network congestion and the associated delays, the real-time image feedback is generally difficult in the public networks like internet. If the remote user is not able to receive the image feedback within a certain time, the work performance may tend to decrease, and it makes difficulties to control of the telerobotics equipment. In this paper, we propose an improved visual feedback scheme over the internet for telerobotics system. The size of a remote site image and its quality are adjusted for efficient transmission. The constructed system has a better real-time update characteristics, and shows a potential for the real-time visual control of the telerobotics system.

• 전기학회논문지
• /
• 제64권4호
• /
• pp.586-591
• /
• 2015

This paper proposes a force feedback system of telepresence robot for remote operation. The ultrasonic sensors attached at the robot detect the obstacles, and generate the force to the operation joystick. In order to consider the network delay, we developed the fuzzy control system using ultrasonic data and robot speed. The method to calculate the force vector from the ultrasonic data is also presented to operate the robot more accurately. The simulation and experimental results are presented to verify the safe and accurate operation of the proposed system.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제13권2호
• /
• pp.106-115
• /
• 2013

LED lighting control system using unidirectional DMX512 (digital multiplex with 512 pieces of information)) protocol has been the most popular. Nowadays, the user's consumption has been upgrading to the more intelligent system but the upgrading process does not affect the existing infrastructure. There were many researches use the additional communication for the feedback communication way such as WiFi, Controller Area Network (CAN), Power Line Communication (PLC), etc but all researches had inherent disadvantages that created the independent feedback with the existing DMX512 system. Our paper represents the novel method that uses the remote device management (RDM) protocol to associate the additional feedback with existent DMX512 infrastructure in the one system. The data in DMX512 frame sending to the DMX512 client is split and repacked to become the RDM packet. This RDM packet is transferred to the RDM monitor console and the response RDM packet is converted to the DMX512 frame for control DMX512 client devices. This is the closed loop control model which uses the bidirectional convertibility between RDM packet and DMX512 frame. The proposed method not only upgrades the feedback control function for the old DMX512 system without changing the existent infrastructure, but also solves compatible problems between new RDM devices and old DMX512 devices and gives the low cost solution for extending DMX512 universe.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.622-627
• /
• 2003

The existing remote control system have some inherent disadvantage of direct control in the limit range. In some special cases, for example, a power apparatus, an unmanned factory, a nuclear factory, a security management system, the tele-operation is needed to control remote robot without limit space. This field is based on the Internet communication. Because the Internet is constructed all over the world. And it is possible that we control remote mobile robot in the long distance. In this paper, we developed a remote control system. This system is divided into two primary parts. These are local site and remote site. There are the moving robot and web server in the remote site and there is the robot control device in local site. The moving robot is moved by two stepper motors and the robot control device consists of SA-1100 micro controller and embedded Linux. And this controller is an embedded system. Public personal computer which is connected the Internet is used for the web server. The web server provides the mobile robot control interface program to the remote controller and captures the image for feedback information. In the whole system, a robot control device is connected with moving robot and web server through the Internet. So the operator can control the moving robot in the distance through the Internet.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.910-917
• /
• 2018

본 논문은 무인차량 원격 제어 시 실재감과 안전성을 향상시키기 위한 기술 개발 내용을 설명한 것이다. 일반적으로 무인차량 원격 운용 장치의 경우 조이스틱 형태의 장치나 간이 조향 휠로 구성하는 것이 대부분이다. 또한 차량 또는 장비를 직접 운전하는 감성을 구현하거나 현재 주행 상황을 운용 장치로 피드백하지 않기 때문에 사용자 입장에서는 이질감을 느낄수밖에 없었다. 최근 무인화 연구가 활발해짐에 따라, 이질감과 함께 현재의 주행 상황을 운전자에게 피드백하지 않아 발생하는 위험까지 제기되었고, 이러한 문제점을 제거하기 위한 힘반향 햅틱제어 기술의 필요성이 대두되었다. 따라서 본 연구에서는 기존의 무인차량 운용 장치가 가지고 있는 문제점을 해결하기 위하여 차량의 주행 상태를 고려한 힘반향 햅틱제어 기술을 제시하였다. 고려되어진 차량 주행 상태는 첫째로 차체 옆미끄럼각(${\beta}$)과 요레이트(${\gamma}$)와 같이 상태변수와 차량 동적 거동을 나타내는 파라미터를 포함하며, 위험 구역 접근, 장애물에 의한 조향 제한 등을 나타낼 수 있는 파라미터를 포함한다. 또한 햅틱제어 기술은 크게 일반 주행 상황, 위험 구역 접근 상황, 장애물에 의한 조향 제한 상황, 제어권 전환 상황 별 알고리즘으로 구성되며, 각 상황 별 천이 과정이 자연스럽도록 알고리즘을 구성하였다. 이러한 알고리즘을 검증하기 위하여 차량동역학 해석 시뮬레이션 툴을 활용, CAN 통신으로 구성된 시뮬레이터 환경을 구축하였으며, 각 상황 별 알고리즘 동작을 평가해봄으로써 실현 가능성 및 성능을 입증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3054-3056
• /
• 1999

There have been numerous risks for excavator operator in working space. To overcome these riske, many researchers have been studied automation of excavator system. In these studies, excavator system is introduced by many researchers based on master-slave force feedback system. In this paper, a remote manipulation excavator is introduced based on force feedback. The proposed remote manipulation excavator system can give a feeling that the operator maneuvers the object directly, resulting in improved reality and efficiency. To demonstrate its performance, experiments are carried out on a test bed which is built around a commercial Hyundai HX-60W hydraulic excavator.