• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2011년도 춘계학술발표대회 논문집
• /
• pp.305-309
• /
• 2011

Reliability evaluation of One-Shot systems which fly at speed of Mach must evaluate as the result which leads a many firing test. But many firing test the fact that is impossible is actuality with problem of budget. Method of prediction leads consequently with alternative and will be able to present the alternative which evaluates. Prediction of One-Shot systems that how many did accumulate a many experience data according to the accuracy is decided, there is a possibility of seeing. One like shot our country and the method which is indirect leads from the environment where the test data is insufficient and only will not be able to set the direction of prediction, the present paper about such method describes 217 Plus where is a reliability prediction standard which is new the thing in standard.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제13권2호
• /
• pp.87-98
• /
• 2013

Accelerated degradation tests (ADTs) measuring failure-related degradation characteristic at the accelerated condition are widely used to assess the reliability of highly reliable products. Often, however, little degradation could be observed even in single-stress ADTs due to the high reliability of test unit, and as a result poor estimate of the reliability may be obtained. ADTs with multiple stress variables can be employed to overcome such difficulties. In this paper, optimal ADT plans with two stress variables are developed assuming that the degradation characteristic follows Weibull distribution by determining the stress levels, the proportion of test units allocated to each stress level such that the asymptotic variance of the maximum likelihood estimator of the q-th quantile of the lifetime distribution at the use condition is minimized.

• 한국군사과학기술학회지
• /
• 제20권6호
• /
• pp.844-852
• /
• 2017

Since guided weapon is high-cost and one-shot device which is non-reusable, it requires a lot of resources to prove required accuracy as a part of reliability demonstration. Once a test for proving accuracy rate of guided missile fails, it causes an additional cost and delay of schedule. This study introduces an equation for proper sample size and plan for guided-missile accuracy rate test in order to minimize the risk of test failure. Proper sample size for the test is derived by considering the reliability growth. Furthermore, each task for accuracy rate test is defined according to the development step. Therefore, this study can contribute to reduce sample size for accuracy rate test in order to meet the reliability requirement and assure transparency in the test process.

• Communications for Statistical Applications and Methods
• /
• 제17권3호
• /
• pp.319-326
• /
• 2010

In this paper, a new group sampling plan for the lot acceptance is proposed for the time truncated life test, which can be utilized when multi-item testers are implemented. The design parameters are found using the two-point approach such that the producer's and consumer's risks are satisfied simultaneously at the acceptable reliability level and the lot tolerance reliability level, respectively. The case of Weibull distribution is described to illustrate the procedure that can be used when the quality level is expressed by a multiple of the specified life. The advantage of the proposed plan is demonstrated by comparing with the existing plan in terms of the sample size required. The tables are constructed and some examples are given to illustrate the procedure developed here.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권2호
• /
• pp.129-135
• /
• 2017

Purpose: This article provides step-stress accelerated degradation test (ADT) plans based on the Wiener process. Method: Step-stress levels and the stress change times are determined based on the D-optimality criteria to develop test plans. Further, a simple grid search method is provided for obtaining the optimal test plan. Results: Based on the solution procedure, ADT plans which include the stress levels and change times are developed for conducting the reliability test. Conclusion: Optimal step-stress ADT plans are provided for the case where the number of measurements is small.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권4호
• /
• pp.287-294
• /
• 2016

Purpose: Environment test support is urgent for small and medium defense companies in order to improve the reliability of weapons systems. Also, to reduce the burden of test costs, the voucher system must be strengthened. Quality assurance support should be accompanied by budget support. Methods: First of all, it is necessary to expand infrastructure for test equipment that suffers shortages by considering environmental test frequency and waiting periods to reduce the time required for environmental tests. Results: In regard to the environmental test, expansion for test equipment infrastructure, security of budget for the test, establishment of test plan, education and consulting support are required to resolve some limits of small and medium defense companies. Conclusion: Along with the opening of environmental test courses for industry operators, the expansion for consulting support projects of the defense industry support system is needed.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제8권1호
• /
• pp.29-37
• /
• 2008

The technology of North Korea has not reached the modem level even though it has economic potential. Standardization and quality control have comprehensively prevailed in South Korea since the 1970s, which is considered to have been based of quality improvement. In the course of an active interchange between South and North, it is necessary to grasp the phenomenon on the quality and reliability control of North Korea. This study will put its relevant terms in order and make a comparison between specifications of North Korea and South Korea in the reliability test plans.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권3호
• /
• pp.201-207
• /
• 2018

Purpose: To develop the reliability growth planning for a subsystem of guided weapon system using PM2-Continuous model. Methods: The target MTBF of the subsystem is set by allocating the system target MTBF to the lower level, where ARINC method is applied. Other model parameters such as initial MTBF, management strategy ratio and average fix effectiveness factor are chosen from historical growth parameter estimates. Given the values of model parameters, the reliability growth planning curve using PM2-Continuous model is constructed and the sensitivity analyses are performed for the changes of model parameters. Results: We have developed the reliability growth plan for a subsystem of guided weapon system using PM2-Continuous model. It was found that the smaller the ratio of initial MTBF to target MTBF, the smaller the management strategy ratio, the smaller the average fix effectiveness factor, and the shorter the development test period, the higher reliability growth is required. Conclusion: The result of this study will be used as a basis for establishing the reliability growth plan, the test period setting and the budget appropriation for the similar system entering the system development stage in the future.

• 한국철도학회논문집
• /
• 제11권3호
• /
• pp.233-239
• /
• 2008

철도차량을 구매하는 데 있어서 신뢰성 목표값을 설정하고 차량 납품 시 이 목표값을 달성하였는지 확인하는 것은 전체 차량의 안전성과 가용성 그리고 전수명주기 측면에서 매우 중요하다. 신뢰성을 검증하는 방법은 여러 가지가 있으나 철도차량 자체의 특성과 운영환경 등을 고려하여 가장 적합한 시험방법을 적용할 필요가 있다. 최근 들어 국내에서도 차량 구입시 정량적 신뢰성 요구사항이 일반화되고 있으나 철도차량에 대한 각종 표준이나 지침에서는 정량적 신뢰성 입증에 대한 구체적 방법에 대한 내용은 없다. 본 연구에서는 다른 산업분야에서 활용되는 신뢰성 검증방법에 대해서 기술하고, 이 방법들을 철도차량에 적용할 수 있는 지 평가하였다. 그리고 이중 세 가지 방법을 철도차량의 실제 운영데이터에 적용해 보았다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 춘계학술대회
• /
• pp.161-167
• /
• 2004

IEC 60300 series, the international standards on reliability management system are newly developed and introduced rapidly worldwide. In order to meet this fast-changing situation, it is necessary to apply them to the Korean industries effectively. It includes the establishment of the infrastructure such as documentation of Korean Standards, introduction of test equipments and test manuals, accreditation of the certification body and training of the specialists etc. IEC 60300 is upgraded management system of the ISO 9000 and ISO 14000. In this regard, the Korean companies which was certified with the ISO 9000 or 14000 should endeavor to find new strategies and methods to be certified with ISO 60300. This paper introduces a quantitative method of estimating the level of the reliability management system by applying the MIR(Maturity Index on Reliability) technique. This enables the estimation of the operation level of the system and can upgrade the maturity level of it.