• Nuclear Engineering and Technology
• /
• 제52권3호
• /
• pp.560-567
• /
• 2020

The complexity of safety critical systems of Nuclear Power Plant continues to increase rapidly due its transition from analog to digital systems. It has thus become progressively more imperative to model these systems prior to their implementation in order to meet the high performance, safety and reliability requirements. Timed Petri Nets (TPNs) have been widely used to model such systems for non-functional analysis. The paper presents a novel methodology for the analysis of the performance metrics using PN modeling. The paper uses the isomorphism property of the TPNs and the Markov chains for the performance analysis of the safety critical systems. The presented methodology has been validated on a Shutdown System of a Nuclear Power Plant.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권3호
• /
• pp.62-66
• /
• 2015

The cryostat is designed for the superconducting quadrupole magnets to be used in a heavy-ion accelerator facility. The main accelerator is superconducting linac, which can accelerate a $^{238}U$ beam to 200 MeV/u (Mega electron voltage per nucleon). The cryostat for the magnet employs an innovative design primarily driven by the requirement of the compactness, user-friendliness and reliability. Also, several ancillary requirements such as background field, space restriction due to the beam line and cryostat structure need technical attentions. The development of the cryostat for three quadrupole magnets in the in-flight fragmentation separator is presented in the paper. The concept of cryogenic design is reported and the amount of cryogenic load is estimated by a relevant analysis. The structure of the cryostat to endure the heavy iron yoke including three quadrupole magnets is presented. In addition, the design as well as the performance test of the support link for the cold mass is described.

• 항공우주기술
• /
• 제11권2호
• /
• pp.103-108
• /
• 2012

발사체의 신뢰성과 추진제 또는 가스의 누설은 매우 밀접한 상관관계를 갖는다. 본 논문에서는 누설에 대한 정성적인 분석을 위한 누설량의 정의와 각 단위계의 변환 관계를 소개하였다. 또한 누설량에 영향을 미치는 인자를 분석하였다. 발사체 기밀시험에 사용하는 가스의 품질 요구조건과 발사체 또는 부품의 기밀을 확인하기 위한 여러 가지 시험 방법을 소개하였다. 아울러 발사체의 추진시스템에 대한 기밀시험에서 사용된 방법과 절차를 간략히 기술하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1998년도 추계종합학술대회
• /
• pp.450-455
• /
• 1998

This paper proposes an enhanced transport protocol for multipeer communications. It is assumed that there exists a transport connection owner that takes the roles of the establishment, management and termination of a transport connection. The proposed protocol classifies the data transfer type into simplex, duplex and N-plex multicasts and provides several transport services to support various requirements in group communications. The general operations and reliability controls of each transfer type are different from one another and carried out by a shared control tree. The QoS negotiation is performed during the creation phase. The notification of negotiated values is followed by an acknowledgment procedure for confirmation. The four-way handshake is introduced. After negotiation, such a resource reservation protocol as RSVP can reserve system and network resources according to the arbitrated values. This paper suggests a conceptual model of the transport layer and its protocol behaviors over the IP multicast and RSVP network.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.564-568
• /
• 2006

Smooth picture module is operated by vibration to tilt the light from the DMD (digital micro mirror device) of DLP projection TV, which makes the screen of the TV smoother and DMD chip cost lower. To satisfy the vibration characteristics of smooth picture module, it is designed by optimizing moment of inertia, spring constant and damping coefficient, using structural and fluid dynamic simulation that showed a good agreement with experimental data. To reduce the material cost and moment of inertia, engineering plastic is used and the reliability is estimated. A VCM (voice coil motor) type actuator for smooth picture has to satisfy performance requirements such as higher driving force, lower power consumption, and lower cost. The initial design and optimization for VCM was performed using FE analysis. It allowed us to optimize the design of magnetic circuit of the proposed actuator to obtain higher force while maintaining a lower cost.

• 한국통신학회논문지
• /
• 제21권11호
• /
• pp.2810-2816
• /
• 1996

In this paper, the problem of obtaining topoloty for mesh network given the link costs and traffic requirements between all pairs of nodes is considered. The proposed DCN algorithm can be applied to the mesh network in a unified manner. Among the cost conditions, the triangle intequality of the MENTOR algorithm is removed in the proposed algorithm. The computational complexity of the algorithm is order N$^{3}$, where N is the number of nodes in the network. The performances of proposed algorithm are better than those of the MENTOR algorithm in the case of the cost and the reliability of network.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.576-578
• /
• 2005

This paper deals with the design of power topology for nuclear power plants. Although rod control system is still classified into non-safety class. much attention on its reliability issue has been given so far because of its importance for the stable operation of the reactor in the plant. In terms of technical aspects, proposed design is reviewed to satisfy system requirements. This paper deals with a design of power topology for driving Control Element Drive Mechanism (CEDM) that is used to withdraw or insert control rods in nuclear reactor.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권6호
• /
• pp.804-809
• /
• 2007

In order to provide reliability. reproducibility. objectivity of solid particle separation performance test on marine centrifugal purifier, an investigation had been done on solid test dusts. test standards and designation of a definite standard test dust In test specifications or standards. ISO 121031-1 A2 test dust is the best test particle to meet commercial and military fuel oil and lube oil requirements on marine standards.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1645-1650
• /
• 2003

A numerical and experimental study is made of thermal behavior of a hot chuck which is specially designed for flip-chip bonders. The hot chuck consists of radiant heat sources and a heated plate of very high conductivity, which is for achievement of high-speed heat-up. A simplified numerical model is developed to simulate unsteady thermal behavior of the heated plate. Parallel experimental work is also conducted for a prototype of the hot chuck. Based on the experimental data, the numerical model is tuned to improve the reliability and accuracy. Design analysis using the numerical model is conducted. The results of numerical computations illustrate that the radiant heater system adopted in this study satisfies the key design requirements for a high-performance hot chuck.

• 한국공작기계학회논문집
• /
• 제11권1호
• /
• pp.91-96
• /
• 2002

Recently industry has moved towards automated operations with the goal of achieving better product quality greater productivity and reliability The pump design in characterized by extensive utilization of the related database which contains performance data. The inputs to the system are through interactive dialogue sessions and the basic input consist of flow rate, head, of fluid efficiency and the customer special requirements. These basic inputs along with the numerous rules in the knowledge bases and the mathematical modeling enable the effective design of the pump industry This paper represents the development of an automatic pump design system that was composed of a main program the data input module the drawing module the drawing edit module and was programed by the AutoLISP language under the Auto CAD program The developed system ultimately generates the design for a pump through the AutoCAD language.