• Solar Energy
• /
• 제17권2호
• /
• pp.43-53
• /
• 1997

Characteristics and properties of batteries applicable to the photovoltaic system are described in this paper. The use of a number of different types of batteries and designs depends on the many and varied requirements for battery power and the different environmental and electrical conditions under which they must operate. Most of the batteries used in PV systems are lead/acid batteries, though nickel/cadmium batteries are used for small applications in locations with extreme climates or where high reliability is essential such as spacecraft. The vanadium redox battery has been acknowledged as a promising energy storage system for a wide range of applications.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.488-490
• /
• 1994

To meet the requirements of high performance and reliability as a industrial motor drive, we developed an integrated oil-line fault diagnosis and monitoring system which consists of DSP-based controller and PC-based MMI (Man-machine interface) program. The dedicated controller performs real-lime fault detections and protections. The MMI program monitors the on-line fault status of the drive system and offers full explanations of the fault name(WHAT?), deducible causes of the fault operation(WHY?), and chock points (HOW?) based upon the experiences of the expert. Also the TRACE data which was stored just before and after the accident can be scrutinized using MMI tools.

• Journal of Information Processing Systems
• /
• 제6권2호
• /
• pp.209-218
• /
• 2010

Classical warranty plans require crisp data obtained from strictly controlled reliability tests. However, in a real situation these requirements might not be fulfilled. In an extreme case, the warranty claims data come from users whose reports are expressed in a vague way. Furthermore, there are special situations where several characteristics are used together as criteria for judging the warranty eligibility of a failed product. This paper suggests a fast reasoning model based on fuzzy logic to handle multi-attribute and vague warranty data.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• 제10권1호
• /
• pp.15-26
• /
• 2004

Pharmaceuticals require more detailed packaging than do other sensitive products, such as foods, although there are several similarities in their requirements. Because the required action of a medication can be nullified by any deterioration in its active principles the protection required from its packaging is at least an order of magnitude greater than that needed by foods. Therefore, security and integrity of the package are more important and are controlled by licensing arrangements. To achieve levels of safety, reliability, and quality, pharmaceutical firms must identify and correct potential problems with packaging functions. Purpose of this study is to identify the present issues pharmaceutical packaging and to forecast their future for the development of pharmaceutical packaging.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.331-332
• /
• 2006

This paper proposes the fuel cell power plants as alternative energy sources for distributed generation in Jeju Island, Korea. This will help to increase the fuel efficiency, at least double the current thermal power plants, decrease environmental pollution, virtually to none, increase the reliability of power supply, reducing the dependency of the HVDC link, and provide quality power to the growing infrastructure in meeting the requirements for the free-trade international island.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1209_1210
• /
• 2009

Recently interior of a country have been innovated driverless LRT(lightweight railway train) that has a virtue of reducion of payroll cost, decrease of headway and improvement of speed. But, if driverless LRT will be happened a accident, response capacity considerably have low. And then passenger will have feel fear. This thesis had examination a IEC 62267 : AUGT safety requirement and analyze safe facilities of the inside and outside of the country. Later on, this result will have not only increase economics, reliability, convenience and safety but also set standardization standard.

• IE interfaces
• /
• 제14권3호
• /
• pp.272-285
• /
• 2001

Proper maintenance techniques have been emphasized in recent years due to increased safety and reliability requirements of systems, increased complexity, and rising costs of material and labor. In the related literature, most studies assume that the system after cm or pm is 'as good as new'(perfect maintenance) or 'as bad as old'(minimal maintenance). But many maintenance activities may not result in these two extreme situations but in a complicated intermediate one. Therefore, perfect maintenance and minimal maintenance are not practical in many actual instances and so realistic imperfect maintenance should be modeled. For this study, various imperfect preventive maintenance models are investigated and analyzed. From the analysis of the imperfect maintenance models modeling methods and maintenance policies are arranged and presented some tables providing informations to the maintenance managers.

• IE interfaces
• /
• 제25권4호
• /
• pp.376-381
• /
• 2012

As the number, complexity and interaction of electrical, electronic and programmable electronic (E/E/PE) systems increase, a growing emphasis has been placed on the concept of functional safety during product development. IEC 61508 provides guidelines and standardized procedures in the development of reliable and dependable E/E/PE systems to assure functional safety. Determining risk classes (i.e., safety integrity levels, SILs) associated to a specific E/E/PE item may be recognized as one of the most crucial activities in the product development per IEC 61508 since SILs are used to specify necessary safety requirements for achieving an acceptable residual risk. This article presents a case study on the assessment of SILs applying failure modes, effects and diagnostic analysis (FMEDA) from which failure rates may be derived for each important failure category by combining a standard FMEA with online diagnostic techniques.

• Journal of Powder Materials
• /
• 제5권4호
• /
• pp.293-298
• /
• 1998

In all larger hardmetal workshops furnaces for dewaxing, vacuum sintering or vacuum and overpressure sintering are today's standard. The furnace technology is well established. Equipment specifications such as operating overpressure, determine sintering cost, product quality, safety and reliability of the furnace and ultimately influence the competitiveness of the hard metal procucer in the global market. Essential furnace requirements are an efficient utilization of the furnace, an environmental friendly dewaxing system, high temperature uniformity, metallurgical treatment with process gases, as well as reduced cooling time by means of rapid cooling. Examples of reduced sintering costs are described achieved using a new design of vacuum sintering furnace with an improved rapid cooling device, cooling times are reduced by up to 45%. Additionally, a cost comparison of two different designs of vacuum overpressure sintering furnaces are included.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• 제5권1호
• /
• pp.9-13
• /
• 2009

The containment local leakage rate testing in nuclear power plants is performed in accordance with ANSI/ANS-56.8(1994) in Korea. Two methods, the make-up flow rate and the pressure decay, are used for LLRT. Though ANSI/ANS-56.8 does not define clearly the minimum test duration for the make-up flow rate method, it requires obtaining the data after reaching the stable condition. Thus the prerequisite stable condition for data acquisition and the test period for type "C" LLRT is differently applied to each NPPs. Therefore, this study presents a unified test criteria for data stabilization and test duration through experiments to improve the test reliability for type "C".