• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.5
• /
• pp.369-381
• /
• 1991

In this paper, design algorithms for SMP(Single Mated Pair) and MMP (Multipli Mated Pair) structure of CCS (Common Channel Signaling) network are proposed through the study of the structure of CCS network. High reliability and fast messagy transfer time are the most important requirements for the CCS network. Based on it, three parameters such as monotraffic, reliability (maximum isolated SP(Signalling Point) number when any two STP(Signalling Transfer Points) fail and total network cost are defined. And the proposed algorithms different from preexisted algorithm that minimizes total network cost, maximize monotraffic with two constraints, reliability and total network cost. Comparing the experimental results of the proposed algorithms with those of the preexisted algorithm that minimizes total network cost, shows that the proposed algorithms produce a more reliable topology that has more monotraffic and a little higher total network cost. Additionaly, with the results of the proposed algorithms, SMP and MMP structures are compared.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.162-168
• /
• 2009

FMEA(Failure Mode and Effect Analysis) is a failure analysis method for the system to identify the potential failure modes, and their effects and causes to reduce or mitigate the critical effects of the system. FMEA for railway was introduced with reliability of railway system, and this was used for identifying and analysing the possible hazards qualitatively to meet the requirements in early stage of business. In general, the overall failure data of system could be managed from design stage by FMEA, and also the countermeasures to prevent many predicted failures could be established by identification of failure modes and assement of failure effects by FMEA. Using these advantages of FMEA, the effectiveness of reliability improvement could be expected if FMEA is applied continuously in operation stage. It is essential that railway vehicles are maintained with high level of safety and reliability not to happen any failures in operation. This paper is proposed the proper FMEA for maintenance of railway vehicles compared with existing FMEA.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.36
• /
• pp.371-377
• /
• 1995

Modern combat (or commertial) aircraft systems consist of a large number of sophisticated and complex avionics/electronics subsystems. The US Air Force of Productivity, Reliability, Availability and Maintainability (PRAM) reports that 25 to 45 percent of aircraft system failures in the electronics or electromechanical area 〔Kachmar, 1985〕. It is an important issue to achive the required reliability and maintainability for avionics/electronics subsystems in order to guarantee the mission success during the life cycle in a timely and cost effective manner. The issuance of USAF Mil-A-87244, "Avionics/Electronic Integrity Program requirements," 1987 demands a new approach called "Avionics/Electronics Integrity Program" (AVIP). The objective of this paper is to give a tutorial presentation on the basic aspects of Avionics/Electronics Integrity efforts in relation to total quality management of avionics/electronics whose performance measures are expressed in terms of reliability, durability, and matainability.

• Journal of the Korean Society for Railway
• /
• v.7 no.3
• /
• pp.245-250
• /
• 2004

The safety of staff, customers and of general Public in general viewed as one of the most important requirements in the urban transit. The maintenance computerization system for car of urban transit is a part of standardization and development of urban transit system, and We have been performed the establishment of maintenance computerization system from 2001 to 2005. The RAMS (reliability, availability, maintainability and safety) estimation for maintenance computerization system are utilized in a variety of computerization system for user's convenience and safety in maintenance. Ever since its inception though, the urban transit has searched for ways to improve reliability, availability, maintainability and safety of the railway subsystem. Provision of a reliable maintenance system include RAMS of the vehicles plays a very important role in achieving a safe system.

• Journal of Sensor Science and Technology
• /
• v.24 no.5
• /
• pp.326-330
• /
• 2015

The recent development of Sensor technology has broadened its applications to many fields of industry including railroad. The sensor technology enables the railroad system to monitor and control. This paper suggests the sensor based system design for evaluating and improving the reliability and safety of the ICT system. For this purpose, the reliability and the level of safety integrity of a general gateway have been predicted quantitatively and the supplementary design has been proposed for RAMS improvement. RAMS requirements for each life cycle stipulated in IEC 62278. RAMS activity is capable of producing significant and effective reductions in operation costs and time.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.551-553
• /
• 2004

SF_6 gas has been increasingly used as the insulating and arc-suppressing medium in switchgears which are used as the protection devices of power system. Nowadays, with these trends, SF_6 load break switches have rapidly substituted for the air or oil-type load break switches, in order to get higher reliability. And, the national standard was made for reliability assessment of SF_6 gas load break switch and testing facilities was also set in KERI(Korea Electrotechnology Research Institute ). This paper introduces the synopsis for the reliability assessment requirements specified in the standard and the assessment results.

• Journal of the Korean Society for Railway
• /
• v.6 no.2
• /
• pp.108-113
• /
• 2003

The safety of staff, customers and of general Public in general viewed as one of the most important requirements in the urban transit. The maintenance computerization system for car of urban transit is a part of standardization and development of urban transit system, and We have been performed the establishment of maintenance computerization system from 2001 to 2005. The RAMS(reliability, availability, maintainability and safety) estimation for maintenance computerization system are utilized in a variety of computerization system for user's convenience and safety in maintenance. Ever since its inception though, the urban transit has searched for ways to improve reliability, availability, maintainability and safety of the railway subsystem. Provision of a reliable maintenance system include RAMS of the vehicles plays a very important role in achieving a safe system.

• Journal of the Korean Society of Systems Engineering
• /
• v.9 no.1
• /
• pp.65-84
• /
• 2013

This paper introduces a systems engineering approach to reliability centered maintenance to address some of the weaknesses. Reliability centered maintenance is a systematic, disciplined process that produces an efficient equipment management strategy to reduce the probability of failure [1]. The study identifies the need for RCM, requirements analysis, design for RCM implementation. Value modeling is used to evaluate the value measures of RCM. The system boundary for the study has been selected as containment spray pump and its motor drive. Failure Mode and Criticality Effects analysis is applied to evaluate the failure modes while the logic tree diagram used to determine the optimum maintenance strategy. It is concluded that condition based maintenance tasks should be enhanced to reduce component degradation and thus improve reliability and availability of the component. It is recommended to apply time directed tasks to age related failures and failure finding tasks to hidden failures.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.3
• /
• pp.146-152
• /
• 2017

Stabilizing the operation of dual fuel diesel engines is very important. The shipbuilding industry is rapidly growing, but gear components requiring reliability are still imported from other countries. The reasoning for this is three-fold. Firstly, it is compulsory that all ships must use devices that meet the performance standards specified in the Safety of Life at Sea (SOLAS) and the convention of MARine POLlution (MAPOL) to prevent pollution caused by ships. Secondly, most ships must comply with the ship classifications specified by ship owners. Therefore, it is specified that key engine gear components must be inspected and authorized for the quality and performance specified by the Ship Register Authority. Thirdly, it is essential that devices (engine gear) for human safety in ships comply with quality standards specified in the regulations and rules by the government. The Ship Register Authority's strict quality standards and approval requirements contribute to the reduction of motivation towards new investment and technology development by device component manufacturers. Therefore, this study aims to develop a method for using infrared thermography to examine gear reliability in order to ensure gear component reliability and national competitiveness in the global market.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.560-562
• /
• 2004

$SF_6$ gas has been increasingly used as the insulating and arc-suppressing medium in switchgears which are used as the protection devices of power system. Nowadays, most of power companies adopted the $SF_6$ gas-type load break switch for increasing the reliability of distribution network by its superior durability against external environmental condition, in substitution for air-type and oil-type switches. But, it is important to establish the general estimation process for the testing and estimation for long-term reliability Accordingly, the national standard(RS C0031) was made for the reliability assessment of $SF_6$ gas load break switch and the testing facilities were also set in KERI(Korea Electrotechlology Research Institute). This paper presents the requirements of RS C0031 for reliability assessment of $SF_6$ gas load break switch and synopsis of the accelerated life testing facilities for $SF_6$ gas load break switch.