• 품질경영학회지
• /
• 제23권4호
• /
• pp.128-147
• /
• 1995

An accelerated life testing(ALT) for aluminum electrolytic capacitors is conducted and analyzed. A testing equipment, which consists of part fixtures, relay board, controller, video bridge and microcomputer, is made for the ALT. Load factors are temperature with four levels and voltage with three levels. Base on 'optimized 4:2:1 plan', 2,000 electrolytic capacitors are allocated at 12 experimental conditions(; 4 levels of temperature ${\times}3$ levels of voltage), and the ALT is conducted. From the experimental results, an acceleration model is derived and acceleration factors are estimated. A discussion on the experimental results is included.

• 대한안전경영과학회지
• /
• 제7권4호
• /
• pp.207-217
• /
• 2005

Line capacity calculation has been used to determine optimum efficiency and safe train service for train scheduling plan and investment priority order throughout detecting bottleneck section. Because of some problems of Yamagisi and UIC methods for line capacity calculation, developing of the method of line capacity caculation and evaluation for the Korea circumstance is important. This paper deals with the reliability improvement on the integrated system of TPS(Train Performance Simulator), PES(Parameter Evaluation Simulator), LCS(Line Capacity Simulator) and simulation and sensitivity analysis for line capacity.

• Asia pacific journal of information systems
• /
• 제17권3호
• /
• pp.79-103
• /
• 2007

The main purpose of this study is to define antecedents that influence e-SCM synchronization and to investigate how it affects e-SCM performance. We, therefore, investigate (1) the impact of firms' internal IT planning capabilities on e-SCM synchronization and on SCM process management capability, (2) the impact of firms' internal IT infrastructure on e-SCM synchronization and on SCM process management capability, (3) the impact of firms' internal SCM process management capabilities on e-SCM synchronization, and finally (4) the impact of e-SCM synchronization on SCM performance. A survey has been administrated to the firms' SCM and marketing staffs and 171 returns analyzed. The results show that (1) IT plan has not direct impacts on e-SCM synchronization, but has direct impacts on organizational support, purchasing, and operations processes except logistics process. IT plan, however, has indirect impacts on e-SCM synchronization through purchasing and operations of SCM process management capability. (2) IT infrastructure has both direct and indirect effects on e-SCM synchronization, and also has direct impacts on organizational support, purchasing, and operations processes except logistics process. (3) SCM process management capabilities have direct impacts on e-SCM synchronization. Among these SCM core processes purchasing positively influences operations, which in turn positively influences logistics process management capability. (4) e-SCM synchronization has positive impacts on SCM performance indicator (SCOR), such as delivery reliability, responsiveness & flexibility, and cost. These results indicate that e-SCM synchronization can be critical to achieve better internal performance like cost and external performance like delivery reliability, responsiveness & flexibility of firms' SCM. In sum, this study demonstrates that the intervening role of e-SCM synchronization between e-SCM performance and IT management capability and between e-SCM performance and SCM core process management capability has been significant in achieving better e-SCM performance. Therefore, it can be suggested that e-SCM performance should be accomplished in consequence of the acceleration of e-SCM synchronization through the enhancement of preceding factors for the e-SCM synchronization.

• 디지털산업정보학회논문지
• /
• 제16권4호
• /
• pp.111-121
• /
• 2020

This study analyzed the effects on system quality, learning commitment, and satisfaction in a mobile environment. A survey was conducted on 192 students enrolled in K University, and the research results are as follows. first, it was found that usefulness had an effect on learning commitment, but connectivity and reliability did not affect learning commitment. second, it was found that the usefulness and connectivity of the system quality had a significant effect on the satisfaction of use. third, the intermediary effect of learning immersion was verified as the connectivity, reliability, and usefulness of the system quality influence the satisfaction of use. connectivity and reliability had no mediating effect of learning commitment, and usefulness was found to play a partial mediating role in affecting user satisfaction. This study is meaningful in that it can provide a plan for improving the quality management of mobile learning and improving the learning effect by analyzing the effects on mobile learning from multiple perspectives.

• 품질경영학회지
• /
• 제49권2호
• /
• pp.113-125
• /
• 2021

Purpose: This study focused on reality and quality improvement of aviation security equipment performance certification system. Methods: For this propose, we analyzed aviation security equipment performance certification system related legislations. Using analyzed data, we suggested advancement plan of aviation security equipment performance certification system. Results: In results, South Korea has been implementing aviation security performance certification system since October 2018. Parts for improvement of system are mutual certification with major countries that operate aviation security equipment performance certification systems, the spread of the defense industry's system, development of similar substances for handling explosives, and introduction of preliminary inspections. Conclusion: The research result could be used as a basic data for upgrading Korea's aviation security performance certification system.

• Corrosion Science and Technology
• /
• 제11권4호
• /
• pp.129-134
• /
• 2012

UT(Ultrasonic Test), one of the non-destructive tests, is the most common thickness measurement method for evaluating the wear rate in NPPs(Nuclear Power Plants). UT is used widely because it is easy and safe for use. However some amount of error inevitably occurs in attempting to measure the thickness. The error, that could make the thickness data thicker or thinner, may affect estimation of wear rate in pipes. NPPs are composed of a lot of pipes and components. Some of them are tested to check the current status during RFO(Re-Fueling Outage). Reliability analysis of UT is essential for evaluating pipe wear rate and establishing the long-term management plan in NPPs. This paper reviewed the cause of error occurrence and presented the UT data reliability analysis method. Also, this paper shows the application result of reliability analysis to the UT data acquired in NPPs.

• Journal of applied mathematics & informatics
• /
• 제41권5호
• /
• pp.1129-1143
• /
• 2023

Social media platforms have become an integral part of our daily lives, and they generate vast amounts of data that can be analyzed for various purposes. However, the quality of the data obtained from social media is often questionable due to factors such as noise, bias, and incompleteness. Enhancing data quality is crucial to ensure the reliability and validity of the results obtained from such data. This paper proposes an enhanced decision-making framework based on Business Decision Management Systems (BDMS) that addresses these challenges by incorporating a data quality enhancement component. The framework includes a backtracking method to improve plan failures and risk-taking abilities and a steep optimized strategy to enhance training plan and resource management, all of which contribute to improving the quality of the data. We examine the efficacy of the proposed framework through research data, which provides evidence of its ability to increase the level of effectiveness and performance by enhancing data quality. Additionally, we demonstrate the reliability of the proposed framework through simulation analysis, which includes true positive analysis, performance analysis, error analysis, and accuracy analysis. This research contributes to the field of business intelligence by providing a framework that addresses critical data quality challenges faced by organizations in decision-making environments.

• 산업경영시스템학회지
• /
• 제40권3호
• /
• pp.18-26
• /
• 2017

Defense industries which require high reliability need an optimized quality management system with well-planned implementation. And the government should examine the overall status of defense industries, then establish practical policies with a proper support plan in required areas to upgrade the quality management level of manufacturers. Thus, DTaQ developed the model for 2 years from 2014, which specialized in quality management level analysis for defense industries. And a survey has been undertaken with that model by DTaQ and Korea Research Center in 2016. The surveyed companies randomly sampled among those which have more than 30 employees and delivery history over past 3 years, and finally 106 defense industries were selected. This paper present survey method and indexes for survey of defense industry quality management level. The survey was conducted in the order of planning, data collection and data processing, and the validity and reliability of the data were verified to increase objectivity of survey results. The survey contents mainly consist of system quality and management quality. System quality includes Product Development Management, Production Operation Management, supply chain quality management, Safety & Environment Management and Reliability Management, on the other hand, management quality includes Strategic Leadership, Human Resource Management, Customer Market Management and Information & Knowledge Management. Thus this proposes the current overall quality management status of the 106 defense industries and shows level differences by company sizes and manufacturing sectors based on the result of survey. Specifically, this paper enables to track the areas which need prompt government support with the policy directions to make quality management level higher. Therefore, it is expected that this can be used as reference data in establishing quality policies for military supplies in the future.

• 농촌계획
• /
• 제13권3호
• /
• pp.23-32
• /
• 2007

In Korea, a regulation of visual impact evaluation on development plan in natural environment is provided at the Natural Environment Conservation Act, but it was difficult to obtained the effectiveness enough to conserve natural landscape. So, the visual impact review on development plan is introduced to the act, through the revision of the Natural Environment Conservation Act in 2005. The basic directions of visual impact review are preservation, restoration, view protection, and harmony. The items of review are as follows; (1) development alternations for the provided plan, (2) executive reduction plan of visual impacts including consideration of growth of plants, (3) deliberation process between persons or parties concerned, etc. For rapid settlement of visual impact review system, it needs that the validity, the reliability, and the objectivity should be confirmed through steady research about reasonable guidance of review.

• 한국BIM학회 논문집
• /
• 제12권1호
• /
• pp.23-34
• /
• 2022

In the current 2D-based design, design reliability is lowered due to interference and inconsistency between plans, errors in drawings and quantities, etc. At the time of transition to BIM-based 3D design, it is necessary to expand the reliability and usability of BIM by eliminating these errors from the design stage through securing the quality of the BIM digital model. Therefore, in the railway infrastructure design stage, the quality management process and standards of the BIM digital model were defined and quality management index were developed. Based on the rule extracted from the quality management index, a pilot quality management was conducted in connection with the commercial Model-Checker rule, problems and improvement plans were derived, and a rule-based automated quality management plan was prepared.