• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.629-631
• /
• 1996

Recently, to increasing the transportation efficiency is to be a important view points in modem railway systems. Therefore the railway communication has an important meaning for the safety of train traffic. In this paper, we have proposed to use HDLC protocol for ground-to-train data transmission, which has some merits of efficiency in data transmission, reliability and bit transparency. Also we describes the HDLC application for data transmission in railway communication.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2687-2689
• /
• 2005

In this paper, a novel algorithm for adaptive majority voting using additional information is described. The novel algorithm increases the reliability of adaptive majority's history. The novel algorithm assists adaptive majority voter to select the result of the most reliable module. The performance of the proposed voter is evaluated through a series of fault injection simulations. The results are compared with those of adaptive majority voter. The empirical results show that the proposed voter has higher safety and availability levels than the adaptive majority voter

• Annual Conference of KIPS
• /
• 2005.11a
• /
• pp.1315-1318
• /
• 2005

현재 국내에서는 교통 안전 운전 서비스 및 교통정보 수집체계 구축에 USN 기술을 적용하기 위한 연구와 시범사업이 추진되고 있다. 사거리 교통 안전 시스템은 교차로로 진입하는 도로위에 무선 센서 노드들을 부착하여 무선 센서 노드 위를 지나는 차량들의 정보(속도, 위치, ID 등)를 실시간으로 수집 및 분석하여 얻은 차량안전 운전정보를 교차로에 접근하는 차량들에게 전송하여 차량충돌을 회피하도록 하는 텔레매틱스 서비스 시스템이다. 이 시스템에서는 최대 1초 이내에 교차로에 접근하는 차량들의 정보를 수집해서 동일 그룹의 차량들에게 충돌회피 정보를 알려주어야 하기 때문에 일반적인 라우팅 알고리즘이 갖지 못한 높은 신뢰성과 실시간성을 가진 라우팅 알고리즘이 필요하다. 본 논문에서는 교차로 주변차량들의 정보를 수집하여 교차로의 베이스 스테이션까지 전송하는데 있어서 높은 신뢰성과 실시간성을 가진 새로운 라우팅 알고리즘을 제안한다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.512-517
• /
• 2009

Resistance factors for static bearing capacity of driven steel pipe piles were calibrated in the framework of reliability theory. A comprehensive foundation design case study on an actual bridge was performed using resistance factors developed in this study. Comparing with Allowable Stress Design (ASD), LRFD design method provides quantitative evaluation of safety level of designed foundation and exhibits considerable potential economy in design.

• Journal of Digital Convergence
• /
• v.16 no.5
• /
• pp.85-95
• /
• 2018

With the scientists and the technicians of the small- and medium-sized enterprises who have been subscribing to the pension service as the subjects, this research took a look at the influences on the intention to continuously subscribe to the pension service and, finally, took a look at the differences between the subscribers of the safety type and the profit type which have been provided by the pension service. Through the questionnaire survey, which collected the data, an actual proof analysis was carried out. Through the statistical program, the degree of the reliability analysis and the feasibility analysis were carried out. And the degree of the suitability of the structural equation model was tested. And, finally, through the research model, the hypothesis was verified and the differences between the groups were analyzed. It appeared that the factors of the reliability and the responsiveness of the service quality factor have the positive influence on the perceived value, which is a parameter. And it appeared that the materiality and the perceptual openness factors cannot have any influence. And the stability and the usefulness, which are the attributed factors of the pension service, had the positive influences on the perceived value. Finally, it appeared that the perceived value of the pension service has a positive influence on the intention to subscribe continuously. Through the results of this research, it can contribute to the invigoration of the pension service. And it is thought that a pension service which is better than the preexistent pension service can be provided.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.1
• /
• pp.41-48
• /
• 2008

Enhanced machine reliability has dramatically reduced the rate and number of railway accidents but for further reduction human error should be considered together that accounts for about 20% of the accidents. Therefore, the objective of this study was to suggest a new taxonomy of performance shaping factors (PSFs) that could be utilized to identify the causes of a human error associated with railway accidents. Four categories of human factor, task factor, environment factor, and organization factor and 14 sub-categories of physical state, psychological state, knowledge/experience/ability, information/communication, regulation/procedure, specific character of task, infrastructure, device/MMI, working environment, external environment, education, direction/management, system/atmosphere, and welfare/opportunity along with 131 specific factors was suggested by carefully reviewing 8 representative published taxonomy of Casualty Analysis Methodology for Maritime Operations (CASMET), Cognitive Reliability and Error Analysis Method (CREAM), Human Factors Analysis and Classification System (HFACS), Integrated Safety Investigation Methodology (ISIM), Korea-Human Performance Enhancement System (K-HPES), Rail safety and Standards Board (RSSB), $TapRoot^{(R)}$, and Technique for Retrospective and Predictive Analysis of Cognitive Errors (TRACEr). Then these were applied to the case of the railway accident occurred between Komo and Kyungsan stations in 2003 for verification. Both cause decision chart and why-because tree were developed and modified to aid the analyst to find causal factors from the suggested taxonomy. The taxonomy was well suited so that eight causes were found to explain the driver's error in the accident. The taxonomy of PSFs suggested in this study could cover from latent factors to direct causes of human errors related with railway accidents with systematic categorization.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2173-2178
• /
• 2008

Railroad is the major factor of vibration source in railway vehicles, and it must carefully maintained the original condition to secure the safety and good ride comfort of passenger. Measuring the condition of rail irregularities such as surface, alignment, gauge, twist and cant etc is required to maintain the good performance of railroad. Currently, the various rail irregularity measurement systems(EM120, ROGER1000K and the Total Rail Irregularity Measurement system of Korea High Speed Train) are operated in Korea to estimate the rail irregularity. It is hard to verify the correlation of one rail irregularity data of a measurement system with the other, because they have been adopted different rail irregularity estimation methods. The best method securing the reliability of the irregularity data is the direct confirmation on the ground where the measurement system had detected as a fault section, but it is impossible to apply all sections simultaneously due to limitation of time, labor, cost and equipments. There is a method to secure the reliability of the data by using acceleration values. Rail irregularities, the major factor of vibration in railway vehicle, are transmitted to the vehicle acceleration through masses, springs, dampers and joints as the system dynamic formation. In this study, Transition Function has been adopted by using the rail irregularity and the acceleration value regarding as input & output parameters respectively. It has been verified by comparing the analyzed results with real measured irregularity data from the Total Rail Irregularity Measurement system of Korea High Speed Train. Also various methods has been accomplished to verify the correlation between rail irregularities and acceleration values.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.695-705
• /
• 2012

Due to recent advances in wireless devices and the automotive industry, Vehicular Ad hoc Networks (VANETs) have emerged as a very promising technology for transferring data collected on the road by moving cars. The delivered data may contain emergency information which affects the safety of passengers and drivers as well as the traffic congestion, and the routing protocols have thus a significant impact on the performance of VANETs. In this paper, we study the impact of movement direction of the participating cars which forward data packets on the performance of data delivery and present a new approach which extends the contention-based forwarding (CBF). The proposed reliable CBF (R-CBF) increases the reliability of data deliver on the traffic lights installed roads and reduces the overall propagation delay without routing loops or interruption of data forwarding that may be caused by changes of relative positions of involving cars in routing. Simulation demonstrates that the R-CBF diminishes propagation delay by 38% in comparison to G-SRMB which forwards data to moving cars in the backward direction and eliminates unnecessary retransmissions.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.452-459
• /
• 2020

The electric actuator receives the user's command input signal (open/closed/stop), checks the status of various sensors (valve position, rotational force, motor status, etc.)in the actuator, and controls the motor forward/reverse to open and close the valve. It is a device that outputs the current state of an actuator (valve) and is used in various fields such as dams, power plants, water and sewage facilities, and oil pipeline facilities. If an electric actuator is installed in a power plant and a problem occurs during operation, it can cause a large economic loss, so system reliability is vert important. In this study, in order to increase the safety of the electric actuator, the development of an electric actuator control device capable of setting the ON/OFF time in hardware was conducted to solve the reliability problem that may occur in software. In addition, the electric actuator control device development environment was developed using Xilinx's Spartan7 FPGA and Altium tool.

• Journal of the Korean Institute of Gas
• /
• v.27 no.4
• /
• pp.92-101
• /
• 2023

To solve the problem of climate change, carbon neutrality has now become a necessity rather than an option. Hydrogen is not only a energy storage that can supplement the intermittent production of renewable energy, but is also considered a good alternative in the field of utilization as it does not emit carbon dioxide after reaction. In order to revitalize hydrogen vehicles, one of the fields of hydrogen utilization, the construction of hydrogen station infrastructure must be preceded. Prioritization of risk factors is necessary for efficient operation and risk assessment of hydrogen stations, but due to the short operation period of domestic hydrogen stations, there is a lack of frequency data on accidents and their reliability is low. In this study, we aim to identify the causes and consequences of deviations in hydrogen stations through HAZOP analysis. Additionally, we intend to analyze them using Fuzzy-AHP. Through this, we intend to derive the decision values for the causes of deviations in hydrogen stations and apply them to hydrogen accident cases and risk assessments to confirm the reliability and utility of the data.