• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.153-159
• /
• 2004

There are various types of PLM(product liability management) according to corporation management level. It is necessary to develop diagnostic methods and application systems for PLM as well as to establish an efficient PLM system. This paper aims to propose a PLM system which can be applied to product with high-reliability and high-safety, and diagnostic methods for PLM based on AHP, and also show an empirical application of the proposed PL management system for Auto Test Robot System of the Mobile Phone (EVT 4320).

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.224-228
• /
• 2012

According to the results of Probabilistic Safety Assessment(PSA) for a Nuclear Power Plant(NPP), an Emergency Power Supply(EPS) system has been considered as one of the most important safety system. Especially, the interests in the reliability of the EPS system have been increased after the severe accidents of Fukushima Daiichi. Firstly, we performed the risk assessment and the importance analysis of the EPS system based on the PSA models of the reference plant, which is the Korean standard NPP type. Considering a portable Diesel Generator(DG) system as the reliability reinforcement of the EPS system, we modified the PSA models and performed the risk impact assessment and the importance analysis. Although the reliability of the potable DG could be about 20% of the reliability of the alternative AC DG, we identified that Core Damage Frequency(CDF) was decreased by at least 4.6%. In addition, the risk impacts due to the unavailability of the EPS system on CDF were decreased.

• Journal of the Korean Society of Safety
• /
• v.18 no.4
• /
• pp.164-168
• /
• 2003

Bayes theorem, suggested by the British Mathematician Bayes (18th century), enables the prior estimate of the probability of an event under the condition given by a specific This theorem has been frequently used to revise the failure probability of a component or system. 2-Stage Bayesian procedure was firstly published by Shultis et al. (1981) and Kaplan (1983), and was further developed based on the studies of Hora & Iman (1990) Papazpgolou et al., Porn(1993). For a small observed failure number (below 12), the estimated reliability of a system or component is not reliable. In the case in which the reliability data of the corresponding system or component can be found in a generic reliability reference book, however, a reliable estimation of the failure probability can be realized by using Bayes theorem, which jointly makes use of the observed data (specific data) and the data found in reference book (generic data).

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.349-355
• /
• 2017

Failures of railway systems can result in train delays or accidents, and therefore high reliability is required to ensure safety of railway systems. To improve reliability, railway systems are designed with redundant systems so that the standby system will continue to function normally even if the primary system fails. Generally, overall system reliability can be evaluated by the reliabilities of the parts of the whole system and the reliability of the redundant system considering common failures in case of each system is not conform physical, functional and process independent. In this study, the reliability of the hot-standby sparing system is analyzed the independent systems and dependent systems with common failures. The reliability for the standby system can be effectively analysed using Markov models, which can model the redundant configuration and the state transition.

• Journal of Applied Reliability
• /
• v.3 no.1
• /
• pp.73-82
• /
• 2003

Reliability Centered Maintenance(RCM) was initially developed for the commercial aviation industry in the late 1960s and now is equally applicable to a variety of equipment other than aircraft. RCM is a method for establishing a preventive maintenance program which will efficiently and effectively allow the achivement of the the required safety and availability levels of equipment and structures. RCM provides for the use of a decision logic tree to identify applicable and effective preventive maintenance requirements for equipment and structures according to the safety, maintenance requirements for equipment and structures according to the safety, operational and economic consequences of identifiable failures, and the degradation mechanism, reponsible for the those failures. The end result of working through the decision logic is a judgement as to the necessity of performing a maintenance task. In this paper, we provide guiding principles based on IEC 60300-3-11 for RCM analysis methods and operational method of structure and equipment.

• Journal of the Korean Society of Safety
• /
• v.19 no.4 s.68
• /
• pp.36-41
• /
• 2004

This paper presents an qualitative assessment for hazard on the electric power installations of a construction field using FMEL The power installations have the mission to maintain the highest level of service reliability on the works. The more capital the electric power invest the higher service reliability they plausibly will achieve. However, because of limited resources, how effectively budgets can be allocated to achieve service reliability as high as possible. The assessment typically generates recommendations for increasing component reliability, thus improving the power installation safety. The FMEA tabulates the failure modes of components and how their failure affects the power installations being considered. Tn order to estimate the risks of a failures, the FMEA presents criticality estimation or risk priority number using the severity, occurrence, and detectability. The results showed that the highest components of the risk priority number among components were condenser, transformer, MCCB and LA. And In case of the criticality estimation, the potential failure modes were abnormal temperature rise, insulation oil leakage, deterioration for the transformer, overcurrent for the MCCB and operation outage fir the LA.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.127-134
• /
• 2012

Plant safety management that is enforcing introducing more than 95% in domestic manufacturing industry is using total plant efficiency by the evaluation index, and as a result, can see a lot of examples that plant productivity, economy and safety is increased. The efficient safety estimation for a business should analyze an accident data by considering every possible and potential factor. This study's purpose centers plant safety management activities that is management system for plant production and safety efficiency's maximization, plant evaluation system that plant safety management activities factor(reliability, maitainability, safety, service quality) that is enforcing in manufacturing industry can develop evaluation model that can evaluate qualitative activities by quantitative activities in process that maximize plant safety management wishes to do design.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.4 no.1
• /
• pp.7-24
• /
• 1996

A methodology has been developed for predicting aircraft reliability incorporating both C.C.F.s(Common-Cause Failures), and phased missions. Failure behaviour of an aircraft, or it's systems are predicted. Both independent failures, and C.C.F.s, are modelled by the Markov process, and simulated using Monte Carlo sampling with the robust variance reduction method. Prediction of safety and reliability is made through discrete-event simulation of aircraft operations. A case study is described for investigating the safety and reliability of the propulsion system of two-, three- and four-engined aircraft. This is particularly important for the design of ETOPS(Extended Range of Two-Engined Aircraft Operations) and results are presented for the cases with, and without the effect of C.C.F.s.

• Journal of the Korean Society of Safety
• /
• v.38 no.5
• /
• pp.43-50
• /
• 2023

With the advent of industrialization, consumers and end-users demand more reliable products. Meeting these demands requires a comprehensive approach, involving tasks such as market information collection, planning, reliable raw material procurement, accurate reliability design, and prediction, including various reliability tests. Moreover, this encompasses aspects like reliability management during manufacturing, operational maintenance, and systematic failure information collection, interpretation, and feedback. Improving product reliability requires prioritizing it from the initial development stage. Failure mode and effect analysis (FMEA) is a widely used method to increase product reliability. In this study, we reanalyzed using the FMEA method and proposed an improved method. Domestic railways lack an accurate measurement method or system for maintenance, so maintenance decisions rely on the opinions of experienced personnel, based on their experience with past faults. However, the current selection method is flawed as it relies on human experience and memory capacity, which are limited and ineffective. Therefore, in this study, we further specify qualitative contents to systematically accumulate failure modes based on the Failure Modes Table and create a standardized form based on the Master FMEA form to newly systematize it.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.2
• /
• pp.161-169
• /
• 2007

This paper presents three methods for expression of reliability measures for large and small data. First method is to express parametric estimation of cardinal reliability measure data for large sample, which requires numerous sample. Second is to obtain nonparametric distribution classification of ordinal reliability measure data for small sample. However it is difficult for field user to understand this method. Last method is to acquire parametric estimation of ordinal reliability measure data for small data. Because this method requires small sample and is comprehensive, we recommend this one among the proposed methods. Various reliability rank measures are presented.