• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2278-2288
• /
• 2017

Multilevel converter topologies are widely used in many applications. The cascaded H-bridge multilevel inverter (CHBMI), which is one of many multilevel converter topologies, has been introduced as a useful topology in high and medium power. However, it has a drawback to require a lot of switches. Therefore, the reliability of CHBMI is important factor for analyzing the performance. This paper presents a simple switch fault diagnosis method for single-phase CHBMI. There are two types of switch faults: open-fault and short-fault. In the open-fault, the body diode of faulty switch provides a freewheeling current path. However, when the short-fault occurs, the distortion of output current is different from that of the open-fault because it has an unavailable freewheeling current flow path due to a disconnection of fuse. The fault diagnosis method is based on the zero current time analysis according to zero-voltage switching states. Using the proposed method, it is possible to detect the location of faulty switch accurately. The PSIM simulation and experimental results show the effectiveness of proposed switch fault diagnosis method.

• Computers and Concrete
• /
• v.20 no.5
• /
• pp.573-582
• /
• 2017

Chloride-induced cover cracking will aggravate the performance deterioration for RC structures under the chlorideladen environment, which may endanger the safety of structures and occupants. Traditional design method cannot ensure that a definite performance is satisfied. To overcome the defects, a study on the performance-based design method was carried out in this paper. Firstly, the limit state functions were established for the corrosion initiation and cover cracking. Thereafter, the uncertainty analysis was performed to study the effects of random factors on the time-dependent performances. Partial factor formulae were deduced through the first-order reliability method for performance verification. Finally, an illustrative example was presented and the sensitivity of cover depth to other parameters was carried out. It is found that the uncertainties of the random variables have great effects on the required cover depth. It is demonstrated that the performance-based design method can ensure that the target performance can be satisfied and support to formulate a rational maintenance and repair strategy for RC structures under the chloride environment.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.276-278
• /
• 2007

Many processes have been introduced to join PE pipes, but most of these methods have lots of disadvantages such as costs and lack of reliability, etc. Recently due to the benefits of cost, safety and reliability, the but welding has been paid much attention to join PE pipes. In case of butt welding, the heat plate which is used to melt PE pipes is the most critical equipment. In this study, after designed secondary developed heat plate of new shape, the PE double wall pipes were but-welding by using the developed heat plate and secondary developed heat plate and comparison of weld-zones and tensile test were performed. As results of tensile test, tensile strengths using secondary developed heat plate were measured higher $1.17{\sim}1.5$ than using developed heat plate.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.69-75
• /
• 2014

The priority of repair areas are chosen with the probability distribution of 0.3mm wide crack and carbonation induced corrosion. Data is analyzed and evaluated based on the 28 section of Precise Inspection for Safety and Diagnosis (PISD) in seoul. As the crack is distributed in log-normal, the carbonation and cover are in normal distribution. To have rational in repair sections among 503 sheets of underground structure, it is adopted the reliability index as well as the environment factors: strength, sonic speed, $CO_2$ concentration, corrosion, and content of chloride.

• Korean Journal of Childcare and Education
• /
• v.18 no.2
• /
• pp.19-38
• /
• 2022

Objective: The goal of this study is to develop an instrument for measuring the quality of teacher support for children's play (age 3-5) based on the Play Practice Resources for Teachers presented in the 2019 revised Nuri Curriculum. Methods: The subjects of this study were 333 early childhood educators. Exploratory and confirmatory factor analysis, as well as correlation analysis were all performed to confirm construct validity and concurrent validity. The reliability of each factor was verified using Cronbach's alpha. Results: The Preschool Teacher Play Support Scale (PTPSS) was finalized with 25 items, which included the following four sub-factors: interaction, play materials, play space, and play safety. The concurrent validity was also confirmed through significant correlations between the existing measures such as the Teacher Self-Efficacy Scale, the Teaching Efficacy Scale for Play, and the Teacher-Toddler Interaction Scale. The reliability of each factor was also desirable. Conclusion/Implications: The PTPSS was verified as a sound measure quantifying the play support behavior of teachers who respect the autonomy and initiative of young children which is being pursued by the 2019 revised Nuri Curriculum.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4863-4870
• /
• 2015

Currently, as a priority to secure the safety of the railway signalling system, verification for satisfy of the safety integrity requirements(SIR) is required to the essential elements. Safety Integrity Requirements(SIR) verification is performed based on the system safety analysis. But the probability of securing basic data for system safety analysis significantly dropped because there is no experience yet performed in the country. Therefore we are had to rely on a qualitative analysis. There are methods such as qualitative risk analysis matrix, and risk graphs. The qualitative analysis is wide, the width of the accident. However, the reliability of the result is significantly less has a disadvantage. Therefore, it should be parallel quantitative safety analysis of the system/products in order to compensate for the disadvantages of the qualitative analysis. This paper presents a quantitative safety analysis method to overcome the disadvantages of the qualitative analysis. And through a result, highly reliable Safety Integrity Requirements(SIR) verification measures proposed. Verification results, the dangerous failure incidence for vital data processing device was calculated to be $1.172279{\times}10^{-9}$. The result was verified to exceed the required safety integrity targets more.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.9 no.1
• /
• pp.1-7
• /
• 2013

In around 2000, the U.S. NPPs have developed the various advanced engineering processes based on the INPO AP-913(Equipment Reliability Process Description) and showed the high performance in availability. With these benchmarking cases, the Korean NPPs have introduced the advanced engineering technology since 2005. The first step of the advanced engineering is to analyze and determine component importance for all components of a plant. This process is called Functional Importance Determination(FID). These results are basically utilized to determine the priority with limited resources in various areas. However, because the consistency of FID results is insufficient despite applying the same criteria in the existing operating NPPs, the degree of application is low. Therefore, this paper presents the improved methodology for FID interfacing system functions of Maintenance Rule Program and results of Single Point Vulnerability(SPV). This improved methodology is expected to contribute to enhance the reliability of FID data.

• Journal of the Ergonomics Society of Korea
• /
• v.18 no.3
• /
• pp.41-53
• /
• 1999

More than twenty HRA (Human Reliability Analysis) methodologies have been developed and used for the safety analysis in nuclear field during the past two decades. However, no methodology appears to have universally been accepted, as various limitations have been raised for more widely used ones. One of the most important limitations of conventional HRA is insufficient analysis of the task structure and problem space. To resolve this problem, we suggest a framework of informational analysis for HRA. The proposed informational analysis consists of three parts. The first part is the scenario analysis that investigates the contextual information related to the given task on the basis of selected scenarios. The second is the goals-means analysis to define the relations between the cognitive goal and task steps. The third is the cognitive function analysis that identifies the cognitive patterns and information flows involved in the task. Through the three-part analysis. systematic investigation is made possible from the macroscopic information on the tasks to the microscopic information on the specific cognitive processes. It is expected that analysts can attain a structured set of information that helps to predict the types and possibility of human error in the given task.

• Korean Journal of Child Studies
• /
• v.32 no.2
• /
• pp.87-104
• /
• 2011

The purpose of this study was to develop a basic life habit scale for infant early childhood. The participants of this study were composed of 1,000 parents of children aged from two to five years old in the Seoul, Gyeong-gi, and In-cheon areas. For the purposes of data analysis, the study made use of the following methods : descriptive statistics for SES variables, item-analysis, factor analysis for validity, and Cronbach's a for reliability. Most items were acceptable in terms of item response rates, and item discrimination. The results of factor analysis uncovered six factors, and 46 items were selected from a total of 69 items in the original scale. The six factors were (1) safety and rules (2) neatness (3) manners (4) self-help (5) eating habits (6) cleanliness. Cronbach's a value for the reliability of the factors ranged from .76 to .94.of Cooperative Learning. Methods. Westport, CT : Greenwood Press.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.4
• /
• pp.193-203
• /
• 2001

The Monte Carlo method was used to evaluate the reliability of crash discrimination algorithms. Through the Fast Fourier Transformation, crash pulses obtained during frontal crash tests of a mini van and a sports utility vehicle were transformed to signals in the frequency domain, and the signals were divided into basic signals and changeable signals. The changeable signals were modified through random generation, and they were combined with the basic signals. Then, the combined signals were transferred back to the time domain. In this way numerous crash pulses could be generated. For the generated pulses, crash discrimination algorithms were evaluated by examining whether they did not result in air bag deployment for the pulses requiring no air bag deployment and whether they resulted in time-to-fires faster than required time-to-fires for the pulses requiring air bag deployment. The crash discrimination algorithm in which the absolute value of the deceleration change multiplied by the velocity change or the summation of the absolute value of the deceleration change was used as a metric was Proven to be highly reliable.