• Structural Engineering and Mechanics
• /
• v.81 no.4
• /
• pp.429-441
• /
• 2022

A probabilistic assessment of the seismic-excited buildings with a multiple-tuned-mass-damper (MTMD) system is carried out in the presence of uncertainties of the structural model, MTMD system, and the stochastic model of the seismic excitations. A free search optimization procedure of the individual mass, stiffness and, damping parameters of the MTMD system based on the snap-drift cuckoo search (SDCS) optimization algorithm is proposed for the optimal design of the MTMD system. Considering a 10-story structure in three cases equipped with single tuned mass damper (STMS), 5-TMD and 10-TMD, sensitivity analyses are carried out using Sobol' indices based on the Monte Carlo simulation (MCS) method. Considering different seismic performance levels, the reliability analyses are done using MCS and kriging-based MCS methods. The results show the maximum structural responses are more affected by changes in the PGA and the stiffness coefficients of the structural floors and TMDs. The results indicate the kriging-based MCS method can estimate the accurate amount of failure probability by spending less time than the MCS. The results also show the MTMD gives a significant reduction in the structural failure probability. The effect of the MTMD on the reduction of the failure probability is remarkable in the performance levels of life safety and collapse prevention. The maximum drift of floors may be reduced for the nominal structural system by increasing the TMDs, however, the complexity of the MTMD model and increasing its corresponding uncertainty sources can be caused a slight increase in the failure probability of the structure.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.207-210
• /
• 2008

In this paper, we researched the dielectric properties and voltage dependence on slice XLPE sheet from 22[kV] and 154[kV] power cable. We studied effects for impurities and water for semiconductor shield through a dielectric properties experiment to estimate performance of insulating materials in power cable. Capacitance and $tan{\delta}$ of 22[kV], 154[kV] were 53/43[pF] and $7.4{\times}10^{-4}$, $2.1510^{-4}$. In these results, the trend was increased with the increase of temperature. The tan6 of XLPE/semiconductor layer was increased as compared with that of XLPE. Dielectric properties reliability of tan6 was small. Also, To improve mean-life and reliability of power cable in this study, we have investigated chemical properties showing by changing the content of carbon black that is semiconductive additives for underground power transmission. Specimens were made of sheet form with the three of existing resins and the nine of specimens for measurement. Chemical properties of specimens was measured by FT-ATR (Fourier Transform Attenuated Total Reflectance). The condition of specimens was a solid sheet. We could observe functional group (C=O, carbonyl group) of specimens through FT-ATR. From these experimental result, the concentration of functional group (C=O) was high according to increasing the content of carbon black. We could know EEA was excellent more than other specimens from above experimental results.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2002.11a
• /
• pp.199-204
• /
• 2002

Reliability Centered Maintenance(RCM) was initially developed for the commercial aviation industry in the late 1960s and now is equally applicable to a variety of equipment other than aircraft. RCM is a method for establishing a preventive maintenance program which will efficiently and effectively allow the achivement of the required safety and availability levels of equipment and structures. RCM provides for the use of a decision logic tree to identify applicable and effective preventive maintenance requirements for equipment and structures. The end result of working through the decision logic is a judgement as to the necessity of performing a maintenance task. In this paper, we provide guiding principles based on IEC 60300-3-11 for RCM analysis methods and operational method of structure and equipment.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.11a
• /
• pp.199-204
• /
• 2002

Reliability Centered Maintenance(RCM) was initially developed for the commercial aviation industry in the late 1960s and now is equally applicable to a variety of equipment other than aircraft. RCM is a method for establishing a preventive maintenance program which will efficiently and effectively allow the achivement of the required safety and availability levels of equipment and structures. RCM provides for the use of a decision logic tree to identify applicable and effective preventive maintenance requirements for equipment and structures. The end result of working through the decision logic is a judgement as to the necessity of performing a maintenance task. In this paper, we provide guiding principles based on IEC 60300-3-11 for RCM analysis methods and operational method of structure and equipment.

• The Research Journal of the Costume Culture
• /
• v.17 no.2
• /
• pp.330-342
• /
• 2009

The purpose of this study was to investigate the equity formation of private apparel brand according the service quality of TV home-shopping. A questionnaire was designed for the survey and the subjects were 383 female adults in Seoul and the Kyongnam province, Korea. The statistical analyses were carried out in the forms of frequency, factor analysis and path analysis of SPSS WIN 14.0. The findings throughout the research are as follows; First, the underwear sets and single item apparel sets with private brand had been well sold at better price. Second, the service quality of TV home shopping was perceived as the four factors of safety, contents, informative faculty and reliability. The reliability and contents factors had higher effects on the equity formation of private apparel brand. Third, the brand image, perceived quality, brand recognition as the cognitive dimension had influenced on the hedonic and utilitarian attitudes. The hedonic attitude and perceived quality had a great deal influence on the purchasing intend as the last behavior dimension.

• Geotechnical Engineering
• /
• v.7 no.3
• /
• pp.21-32
• /
• 1991

The purpose of this paper is to develop a reliability model for slope stability of Earth-rockfill dams which accounts for all uncertainties encountered. The uncertain factors of the design variables include the cohesion, the angle of internal friction, and the porewater Pressure in each zone. More specifically, the model errors in estimating those variables are studied in depth. To reduce the uncertainties due to model errors, updated design variables are obtained using Bayesian Theory. For stability analysis, both the two-dimesional stability analysis and the three-dimensional stability analysis where the end effects and the system reliability concept are considered are used for the reliability calculations. The deterministic safety factor by the three-dimensional analysis is lager than that by the two-dimensional anlysis. However, the probability of failure by the three-dimensional analysis is about 3.5 times larger that by the two-dimensional analysis. It is because the system reliability concept is used in the three-dimensional analysis. The sensitivity analysis shows that the probability of failure is more sensitive to the uncertainty of the cohesion than that of the angle of internal friction.

• Journal of Korean Society for Quality Management
• /
• v.47 no.4
• /
• pp.701-711
• /
• 2019

Purpose: The problem of optimizing redundancy allocation in multi-level systems is considered when each item in a multi-level system has alternative items with the same function. The number of redundancy of multi-level system is allocated to maximize the reliability of the system under path set and cost limitation constraints. Methods: Based on cost limitation and path set constraints, a mathematical model is established to maximize system reliability. Particle swarm optimization is employed for redundant allocation and verified by numerical experiments. Results: Comparing the particle swarm optimization method and the memetic algorithm for the 3 and 4 level systems, the particle swarm optimization method showed better performance for solution quality and search time. Particularly, the particle swarm optimization showed much less than the memetic algorithm for variation of results. Conclusion: The proposed particle swarm optimization considerably shortens the time to search for a feasible solution in MRAP with path set constraints. PS optimization is expected to reduce search time and propose the better solution for various problems related to MRAP.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.3
• /
• pp.180-187
• /
• 2014

This paper introduces reliable multicast MAC protocol for cooperative unmanned vehicles. cooperative unmanned vehicles communicate with infrastructure and other unmanned vehicles in order to increase driving safety. They exchange information related to driving and thus it requires real-time and reliable multicast. However, the international vehicular communication standard, IEEE 802.11p WAVE, does not provide a reliable multicast scheme on the MAC layer. To address the problems of reliability, we propose a reliable multicast protocol called WiVCL, which avoids contention and collision. Our evaluation shows that the WiVCL achieves a high degree of reliability and real-time features.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1554-1560
• /
• 2019

Development of digital main control rooms (MCRs) has greatly changed operating environments by altering operator tasks, and thus the unique characteristics of digital MCRs should be considered in terms of human reliability analysis. Digital MCR tasks can be divided into primary tasks that directly supply control input to the plant equipment, and secondary tasks that include interface management conducted via soft controls (SCs). Operator performance regarding these secondary tasks must be evaluated since such tasks did not exist in previous analog systems. In this paper, we analyzed SC-related tasks based on simulation data, and classified the error modes of the SCs following analysis of all operational tasks. Then, we defined the factors to be considered in human reliability analysis methods regarding the SCs; such factors are mainly related to interface management and computerized operator support systems. As these support systems function to reduce the number of secondary tasks required for SC, we conducted an assessment to evaluate the efficiency of one such support system. The results of this study may facilitate the development of training programs as well as help to optimize interface design to better reflect the interface management task characteristics of digitalized MCRs.

• Journal of Food Hygiene and Safety
• /
• v.31 no.5
• /
• pp.327-334
• /
• 2016

This study was conducted to establish the standard method for the contents of biotin in milk formulas. To optimize the method, we compared several conditions for liquid extraction, purification and instrumental measurement using spiked samples and certified reference material (NIST SRM 1849a) as test materials. LC-MS/MS method for biotin was established using $C_{18}$ column and binary gradient 0.1% formic acid/acetonitrile, 0.1% formic acid/water mobile phase is applied for biotin. Product-ion traces at m/z 245.1 ${\rightarrow}$ 227.1, 166.1 are used for quantitative analysis of biotin. The linearity was over $R^2=0.999$ in range of $5{\sim}60{\mu}g/L$. For purification, chloroform was used as a solvent for eliminating lipids in milk formula. The linearity was over 0.999 in range of 5~60 ng/mL. The detection limit and quantification limit were 0.10, 0.31 ng/mL. The accuracy and precision of LC-MS/MS method using CRM were 103%, 2.5% respectively. Optimized methods were applied in sample analysis to verify the reliability. All the tested milk formulas were acceptable contents of biotin compared with component specification and standards for nutrition labeling. The standard operating procedures were prepared for biotin to provide experimental information and to strengthen the management of nutrient in milk formula.