• Journal of the Korean Society of Safety
• /
• v.35 no.5
• /
• pp.15-21
• /
• 2020

Quantitative risk assessment (QRA) is used as a legal or voluntary safety management tool for the hazardous material industry and the utilization of the method is gradually increasing. Therefore, a leak frequency analysis based on reliable generic data is a critical element in the evolution of QRA and safety technologies. The aim of this paper is to derive the leak frequency function that can be applied more flexibly in QRA based on OGP report with high reliability and global utilization. For the purpose, we first reviewed the data on the 16 equipments included in the OGP report and selected the predictors. And then we found good equations to fit the OGP data using non-linear regression analysis. The various expectation functions were applied to search for suitable parameter to serve as a meaningful reference in the future. The results of this analysis show that the best fitting parameter is found in the form of DNV function and connection function in natural logarithm. In conclusion, the average percentage error between the fitted and the original value is very small as 3 %, so the derived prediction function can be applicable in the quantitative frequency analysis. This study is to contribute to expand the applicability of QRA and advance safety engineering as providing the generic equations for practical leak frequency analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.548-556
• /
• 2019

The purpose of this study is to analyze the impact of dietary lifestyles and demographic characteristics on the Brand image of restaurants with Nutritional labeling to provide basic marketing data for establishing differentiated Brand image strategies for restaurant businesses. To that end, the SPSS21.0 (ver.) program, frequency analysis, descriptive statistics, factor analysis, reliability analysis, correlation analysis, and multiple linear regression analysis were conducted to verify the hypothesis. As a result, the Brand image of restaurants with Nutritional labeling improved as the metropolitan area sought safety, non-capital area sought taste, males sought health, and females sought safety. In terms of age, it was analyzed that as more people in their 20s sought taste, those their 30s and 40s sought safety, and both married and unmarried people sought safety, the Brand image of restaurants with Nutritional labeling improved. In other words, it could be seen that people with Dietary lifestyles who pursued health and safety had positive images of restaurants with Nutritional labeling regardless of residential area, age, gender, marital status, or whether they had children.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.4
• /
• pp.391-398
• /
• 2011

SHS(Ship-Handling Simulator) is virtual generation of vessel traffic situation under various environmental conditions. Recent, with the introduction of MSA(Maritime Safety Audit), SHS is being used as a key facility to determine the safety of navigation. However, the current audit techniques specified in the implementation guidance of MSA have been prepared by generalizing common procedures and evaluation methods used by institutions operating simulator systems. Therefore, they need to be reviewed and supplemented. This study analyzed the adequacy of current audit techniques based on the limitations and problems, then suggested the advanced scheme of SHS such as standardization of ship models, standard manoeuvring and evaluation method. The results of this research will contribute to improving the quantification and reliability of audit techniques used in the MSA as well as upgrading of the simulator system.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1994.11a
• /
• pp.21-26
• /
• 1994

Conventional electroexplosive devices (EED) commonly use a very small metal bridgewire to ignite explosive materials i.e. pyrotechnics, primary and secondary explosives. The use of semiconductor devices to replace “hot-wire” resistance heating elements in automotive safety systems pyrotechnic devices has been under development for several years. In a typical 1 amp/1 watt electroexplosive devices, ignition takes place a few milliseconds after a current pulse of at least 25 mJ is applied to the bridgewire. In contrast, as for a SCB devices, ignition takes place in a few tens of microseconds and only require approximately one-tenth the input energy of a conventional electroexplosive devices. Typically, when SCB device is driven by a short (20 $\mu\textrm{s}$), low energy pulse (less than 5 mJ), the SCB produces a hot plasma that ignites explosive materials. The advantages and disadvantages of this technology are strongly dependent upon the particular technology selected. To date, three distinct technologies have evolved, each of which utilizes a hot, silicon plasma as the pyrotechnic initiation element. These technologies are 1.) Heavily doped silicon as the resistive heating initiation mechanism, 2.) Tungsten enhanced silicon which utilizes a chemically vapor deposited layer of tungsten as the initiation element, and 3.) a junction diode, fabricated with standard CMOS processes, which creates the initial thermal environment by avalanche breakdown of the diode. This paper describes the three technologies, discusses the advantages and disadvantages of each as they apply to electroexplosive devises, and recommends a methodology for selection of the best device for a particular system environment. The important parameters in this analysis are: All-Fire energy, All-Fire voltage, response time, ease of integration with other semiconductor devices, cost (overall system cost), and reliability. The potential for significant cost savings by integrating several safety functions into the initiator makes this technology worthy of attention by the safety system designer.

• Journal of Advanced Navigation Technology
• /
• v.26 no.2
• /
• pp.47-53
• /
• 2022

With the recent development of defense technology, various aircraft armaments/equipments are being developed. Among them, cruise guided weapons(missile) for launching aircraft can be installed on aircraft aftersecuring reliability and safety through varioustests. In order to avoid collision with aircraft, missile separated from aircraft must release restraint of wing at the specified time, control wing in the specified direction. In order to confirm this, a test system that can control MIL-STD-1760 according to safety separation procedure and verify release performance is required. test system needs a function to check circuit for release of restraints and a function to check driving performance by controlling MIL-STD-1760. In addition, test system should be simulate environment separated from aircraft. This paper presented a testsystemthat can verify circuit and driving performance mounted on missile according to the safety separation procedure, and it was confirmed that it was normally separated from aircraft through flight tests.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.14-22
• /
• 2016

Because fuses have many parts, human error can occur during visual inspections. This paper proposes an automatic ammunition test algorithm for preventing human error during an inspection. The automatic ammunition test algorithm consists of the following three steps. First, the image input and preprocessing step is where an inspection image is rotated using an image rotation algorithm and the image is converted to a binary image. Second, the inspection step of arming determines if the ammunition is armed using Masked Template Matching algorithm, etc. Third, the inspection step of the parts determines if the parts are omitted using an image searching algorithm, etc. The arming or parts omission of the fuse are detected efficiently using the ammunition automatic test algorithm. The ammunition automatic test algorithm is expected to help improve the safety and reliability of 40 mm grenade fuse.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.10
• /
• pp.931-940
• /
• 2017

This paper describes a predictive fault diagnosis algorithm for autonomous vehicles based on a kinematic model that uses a sliding mode observer. To ensure the safety of autonomous vehicles, reliable information about the environment and vehicle dynamic states is required. A predictive algorithm that can interactively diagnose longitudinal environment and vehicle acceleration information is proposed in this paper to evaluate the reliability of sensors. To design the diagnosis algorithm, a longitudinal kinematic model is used based on a sliding mode observer. The reliability of the fault diagnosis algorithm can be ensured because the sliding mode observer utilized can reconstruct the relative acceleration despite faulty signals in the longitudinal environment information. Actual data based performance evaluations are conducted with various fault conditions for a reasonable performance evaluation of the predictive fault diagnosis algorithm presented in this paper. The evaluation results show that the proposed diagnosis algorithm can reasonably diagnose the faults in the longitudinal environment and acceleration information for all fault conditions.

• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.264-270
• /
• 2018

In recent years, It is required to verify software reliability according to DO-178, which announced by radio technical commission for aeronautics (RTCA) and recognized by the Federal Aviation Administration (FAA), for civil aircraft developed or intended to fly in the United States or Europe. This is because the reliance on software in each field is deepening, and the efforts for improvement of software reliability have been made first in civil aviation field where economic and social impacts are catastrophic in the event of an accident. In this paper, we have identified some issues to be considered for requirements-based reliability verification required by DO-178 to improve software reliability and present the major elements of the present weapon system acquisition procedure of DAPA for each stage. In addition, we analyzed the results of applying the identified main check factors to a domestic aircraft development project based on the information accumulated in overseas aircraft development projects. As a result, we have shown that it is possible to verify requirements-based software reliability according to DO-178 by adding key checkpoints to the current weapon system acquisition procedure and providing objective inspection criteria.

• Journal of the Korea Society for Simulation
• /
• v.20 no.1
• /
• pp.19-28
• /
• 2011

The safety applications based on the IEEE 802.11p, periodically transmit the safety-related information to all surrounding vehicles with high reliability and a strict timeline. However, due to the high vehicle mobility, dynamic network topology and limited network resource, the fixed beacon scheduling scheme excess delay and packet loss due to the channel contention and network congestion. With this motivation, we propose a novel beacon scheduling algorithm referred to as spatial-aware(SA) beacon scheduling based on the spatial context information, dynamically rescheduling the beaconing rate like a TDMA channel access scheme. The proposed SA beacon scheduling algorithm was evaluated using different highway traffic scenarios with both a realistic channel model and 802.11p model in our simulation. The simulation results showed that the performance of our proposed algorithm was better than the fixed scheduling in terms of throughput, channel access delay, and channel load. Also, our proposed algorithm is satisfy the requirements of vehicular safety application.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.2
• /
• pp.217-225
• /
• 2010

Most of the steel bridges in Korea are being currently designed by the allowable stress design method that uses the conventional deterministic factors of safety. However the limit state design based on the concept of probability, statistics and reliability engineering is becoming very popular as a global standard deign method, leading the rational and economic bridge design. As part of the fundamental research to establish the load and resistance factor design(LRFD) of steel bridges considering domestic environmental conditions and regional characteristics, an experimental design is conducted by applying AASHTO-LRFD specification especially to a steel closed-box girder, which occupies relatively a large portion of steel bridges in Korea. Throughout the experimental design according to various sectional changes, some of the issues to be considered in the LRFD design of a composite steel closed-box girder bridge are examined. In this process, an Excel-based design verification program is developed for easy computation and prevention of errors. Quantitative reliability levels of the bridge sections designed by LRFD are also estimated using a reliability analysis method, and compared with the target reliability indexes applied in the LRFD design to verify the validity of the procedure and methodology used in this study.