• Journal of the Korean Geotechnical Society
• /
• v.24 no.7
• /
• pp.75-80
• /
• 2008

When a saturated clay is sampled in an undisturbed manner from a bore hole, the sample extends vertically and shrinks horizontally under undrained conditions due to stress release. The conventional consolidation test specimen is trimmed from the expanded sample so that its diameter is equal to the inner diameter of the consolidation test ring, and this test procedure does not reproduce the actual consolidation behavior. The measurement of sample extension was conducted by means of overcoring method showed that the extension strains were 1 to 2%. To simulate the in-situ consolidation behavior, we proposed the consolidation test method that uses a specimen with a slightly smaller diameter than the inside diameter of consolidometer so that the specimen expands laterally to the inside of the ring.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.299-304
• /
• 2021

This study focuses on the preparation of acetaminophen (AP) imprinted functional biomaterials for a transdermal drug delivery using mung bean starch (MBS), polyvinyl alcohol (PVA), sodium benzoate (S) as a crosslinking agent, glycerol (GL) as a plasticizer, and melanin (MEL) as a photothermal agent. The prepared AP imprinted biomaterials were characterized using FE-SEM and their physical properties were evaluated. The photothermal effect and AP release property for functional biomaterials were examined with the irradiation of near infrared (NIR) laser (1.5 W/cm²). When the NIR laser was irradiated on functional biomaterials with/without the addition of MEL, the temperature of MEL added biomaterial increased from 25 ℃ to 41 ℃, whereas the biomaterial without MEL increased from 25 ℃ to 28 ℃. Results indicate that there is the photothermal effect of prepared biomaterial with the addition of MEL. Based on the results, AP release properties were evaluated using standard buffer solutions and artificial skin. It was found that AP release rates of MEL added AP loaded biomaterials were 1.2 times faster than those of MEL non-added AP loaded biomaterials when irradiating with NIR laser. We envision that the developed functional biomaterials can be utilized for an acute pain-killing treatment.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.2
• /
• pp.156-179
• /
• 2020

The Preservation Decree (1933) is the basic law relevant to the conservation of cultural property of colonial Chosun, and invoked clauses from the Old History Preservation Act (1897), the Historic Scenic Sites Natural Monument Preservation Act (1919), and the National Treasure Preservation Act (1929), which were all forms of Japanese Modern Cultural Heritage Law, and actually used the corresponding legal text of those laws. Thus, the fact that the Preservation Decree transplanted or imitated the Japanese Modern Cultural Heritage Law in the composition of the constitution can be proved to some extent. The main features and characteristics of the Preservation Decree are summarized below. First, in terms of preservation of cultural property, the Preservation Decree strengthened and expanded preservation beyond the existing conservation rules. In the conservation rules, the categories of cultural properties were limited to historic sites and relics, while the Preservation Decree classifies cultural properties into four categories: treasures, historic sites, scenic spots, and natural monuments. In addition, the Preservation Decree is considered to have advanced cultural property preservation law by establishing the standard for conserving cultural property, expanding the scope of cultural property, introducing explicit provisions on the restriction of ownership and the designation system for cultural property, and defining the basis for supporting the natural treasury. Second, the Preservation Decree admittedly had limitations as a colonial cultural property law. Article 1 of the Preservation Decree sets the standard of "Historic Enhancement or Example of Art" as a criteria for designating treasures. With the perspective of Japanese imperialism, this acted as a criterion for catering to cultural assets based on the governor's assimilation policy, revealing its limitations as a standard for preserving cultural assets. In addition, the Japanese imperialists asserted that the cultural property law served to reduce cultural property robbery, but the robbery and exporting of cultural assets by such means as grave robbery, trafficking, and exportation to Japan did not cease even after the Preservation Decree came into effect. This is because governors and officials who had to obey and protect the law become parties to looting and extraction of property, or the plunder and release of cultural property by the Japanese continued with their acknowledgement,. This indicates that cultural property legislation at that time did not function properly, as the governor allowed or condoned such exporting and plundering. In this way, the cultural property laws of the Japanese colonial period constituted discriminative colonial legislation which was selected and applied from the perspective of the Japanese government-general in the designation and preservation of cultural property, and the cultural property policy of Japan focused on the use of cultural assets as a means of realizing their assimilation policy. Therefore, this suggests that the cultural property legislation during the Japanese colonial period was used as a mechanism to solidify the cultural colonial rules of Chosun and to realize the assimilation policy of the Japanese government-general.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11A
• /
• pp.1091-1096
• /
• 2010

Stiction in microelectromechanical systems (MEMS) has been a major failure mechanism. Especially, in RF MEMS switches, moving parts often suffered in-use and release related stiction problems. Some materials and methods have been used to prevent this problem. Diamond-like carbon (DLC) has not only been used as a protective material owing to its good mechanical properties but also has been used as a hydrophobic material. Its properties could be controlled by post annealing treatment in various conditions. We synthesized DLC films using a radio frequency plasma enhanced chemical vapor deposition (RF PECVD) method on silicon substrates using methane ($CH_4$) and hydrogen ($H_2$) gas. Then, the change of the hydrophobic property of the films was investigated undervarious annealing temperatures in nitrogen and in oxygen ambient. The films, that were annealed above $700^{\circ}C$ in nitrogen ambient, showed a high contact angle of water (> $90^{\circ}$) even though their mechanical property was sacrificed to some degree. The structural variation and the changes of the hydrophobic and mechanical properties of the DLC films were analyzed by Raman spectrum, contact angle measurement, surface profiler, and a nanoindentation test.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.25-34
• /
• 2012

In this study, in the process of testing before the release of the software products designed, software testing manager in advance should be aware of the testing-information. Therefore, the effective learning effects perspective has been studied using the NHPP software. The finite failure nonhomogeneous Poisson process models presented and applied property of learning effect based on truncated time and delayed S-shaped software reliability. Software error detection techniques known in advance, but influencing factors for considering the errors found automatically and learning factors, by prior experience, to find precisely the error factor setting up the testing manager are presented comparing the problem. As a result, the learning factor is greater than autonomous errors-detected factor that is generally efficient model can be confirmed. This paper, a failure data analysis was performed, using time between failures, according to the small sample and large sample sizes. The parameter estimation was carried out using maximum likelihood estimation method. Model selection was performed using the mean square error and coefficient of determination, after the data efficiency from the data through trend analysis was performed.

• 연구논문집
• /
• s.30
• /
• pp.137-145
• /
• 2000

Since the concept of osseointegration was introduced, titanium and titanium-based alloy materials have been increasingly used for bone-anchored metal in oralmaxillofacial and orthopedic reconstruction. Successful osseointegration has been attributed to biocompatibility and surface condition of metal implant among other factors. Although titanium and titanium alloys have an excellent over the metal ion release and biocompatibility, considerable controversy has developed over the metal ion and wear debris in vivo and vitro. In this study, nitrogen ion implantation technique was used to improve the corrosion resistance and wear property of titanium materials, ultimately to enhance the tissue reaction to titanium implants As ion implantation energy was increased, projected range of nitrogen ion the Ti substrate was gradually increased. Under condition of constant ion energy. atomic concentration of nitrogen was also increased with ion doses. The friction in Hank's solution was increased with ion doses. The friction coefficient of ion implanted specimens in HanK's solution was increased from 0.39, 0.47 to 0.52, 0.65 respectively under high energy and ion dose conditions. As increasing ion energies and ion dose, amount of wear was reduced.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.4
• /
• pp.515-524
• /
• 1998

The purpose of this study was to evaluate the thermal properties of ceramics coated nylon fabrics by determining far infra-red emissive properties, heat storage/release and thermal insulation. Far IR emissivity and emissive power were measured for 7~ 140n at 50'C . Three types of ceramics such as cordierite with $\alpha$-alumina, a-alumina with titanium oxide and a-alumina were chosen as specimens. Cordierite with $\alpha$-alumina was chosen to treat on the fabrics due to the good emissive properties on the fabrics. Add-ons and contents of ceramics were analyzed for ceramics and/or polyurethane coated fabrics. For the physical properties, thickness and air permeability were measured. Results showed a difference in the emissive property between ceramics themselves and ceramics coated fabrics. In the ambient temperature, there was no diffenence in emissivity among the different ceramics contents. Thermography showed that when the fabric was heated with the light, surface mean temperatures of fabrics were increased as the contents of ceramics increased, and the heat storage property was confirmed. In case of same thickness and air permeability, the thermal insulation value increased as the contents of ceramics increased because of increasing heat storage and Far IR reflectivity. So there were absorption and heat storage of ceramics for Far IR from human and reflection to human between ceramics coated fabrics and human.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.17-26
• /
• 2019

This research aims to obtain useful data on the development of compression garment products with high-stretch knitted materials. Using nylon SCY, four specimens were knitted. Then, appearance (width, length, weight, thickness), stretch property (stretch, recovery) and clothing pressure were measured and their interrelation was analyzed. In the comparison of appearance features, yarn floating caused shrinkage in both course and wale directions of the specimens. Yarn overlapping by tucking caused a release in the course direction and shrinkage in the wale direction. Also, structural change was affected by the weight and thickness change of the knitted fabric. In the analysis of fabric stretch, yarn floating reduced the extension in course direction and increased that in wale direction of the knitted fabric. However, yarn overlapping reduced the elongation in both directions. In the analysis of recovery, yarn floating and overlapping raised fabric recovery in both directions, and tuck structure was superior to float in recovery. In the analysis of clothing pressure, 'Plain-Float' structured fabrics showed a higher clothing pressure than 'Plain' and the clothing pressure value of 'Plain-Tuck' was lower than that of 'Plain'. As for the correlation between fabric appearance, stretch property, and clothing pressure, the appearance change in course direction had a major influence on the clothing pressure. The shrinkage of appearance led to a decrease in stretch and an increase in clothing pressure.

• Polymer(Korea)
• /
• v.35 no.2
• /
• pp.113-118
• /
• 2011

Solid dispersion is used to improve the solubility of water-insoluble drug. Release properties depend on the characteristics of polymer and the physicochemical properties of solid dispersion. In this study the solid dispersions of ibuprofen and cellulose acetate were prepared using spray-drying and rotary evaporation. The physicochemical properties of the solid dispersions were analyzed by SEM, XRD, DSC, and FTIR. The hydrophilicity of polymer was analyzed by measuring the contact angle of water. The results of DSC and XRD analysis demonstrated that the crystallinity of ibuprofen was changed by solid dispersion preparation. The results of contact angle showed that hydrophilicity was proportional to polymer content. Release profile showed that for solid dispersion. the release rate of ibuprofen decreased as polymer content increased in intestinal juice (pH 6.8). The dissolution rate of ibuprofen was improved with increasing polymer content in gastric juice (pH 1.2).

• Elastomers and Composites
• /
• v.38 no.4
• /
• pp.316-325
• /
• 2003

The blends of waste-polyethylene (W-PE)/waste-ethylene vinyl acetate copolymer (W-EVA) with inorganic and phosphorous flame retardants (i.e., aluminium hydroxide, magnesium hydroxide, and so on) were prepared by melt mixing techniques at different compositions and foamed. The flame retardancy and foaming properties of the blends, limiting oxygen index (LOI), heat release rate (HRR), carbon monoxide yield (COY), total heat release (THR), effective heat of combustion (EHC), expandability and cell structure were investigated using cone calorimeter, SEM, LOI tester and polarizing microscope. When the composition ratios of the W-PE/W-EVA blends were 50/50 (w/w), and the ranges of the flame retardants contents were $175{\sim}220 phr$, we could obtain foams with the uniform and closed cell, high expandability (1900 % or more), high LOI, and low HRR values. These results depend on crosslinking and loaming conditions, a char formation and smoke suppressing effect. Aluminium hydroxide had more effect in the increase of LOI than magnesium hydroxide, while magnesium hydroxide considerably affected the decrease of HRR and COY.