• Journal of environmental and Sanitary engineering
• /
• v.14 no.1
• /
• pp.97-102
• /
• 1999

This study was carried out view that reuse of sludge of adsorbent for benzene in carbonized cast compare with activated carbon. Not only the carbonized cast is good than carbonized carbon in cation exchange capacity and 12 adsorption capacity, but also benzene adsorption capacity is no differences compare to activated carbon. As results, benzene adsorption capacity of carbonized cast and activated carbon are decreased as temperature increase($25~70^{\circ}C$).It is compatible in Lamgmuir model. Therefore, carbonized cast is applied general adsorbent. From experimental results and data regression, in model concerning effect of temperature, relative errors between the experimental data and those calculated by the model are within the range of 1.2~7.8%. In relative humidity effect (RH 0.25~0.50) of benzene adsorption, modified Freundlich model : $QB_{enzene}{;\}QB_{enzene},{\}_{RH=0}=1-kRH^{IN}$, relative errors between the experimental data and those calculated by the model are within are range of 0.5-5.1%. The constants k and l/n in equation were found to be 1.25, 1.89 in carbonized cast.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.331-337
• /
• 1998

This study was carried out to derive optimal design floods by Weibull-3 distribution with the annual maximum series at seven watersheds along Man, Nagdong, Geum, Yeongsan and Seomjin river systems. Adequacy for the analysis of flood data used in this study was acknowledged by the tests of Independence, Homogeneity, detection of Outliers. Parameters were estimated by the Methods of Moments and L-Moments. Design floods obtained by Methods of Moments and L-Moments using different methods for plotting positions in Weibull-3 distribution were compared by the rotative mean error and relative absolute error. It has shown that design floods derived by the method of L-moments using Weibull plotting position formula in Weibull-3 distribution are much closer to those of the observed data in comparison with those obtained by method of moments using different formulas for plotting positions in view of relative mean and relative absolute error.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.28 no.1
• /
• pp.63-77
• /
• 2003

Group buying is one of the most popular transaction patterns on the internet at least in Korea. Nevertheless, it is hard to find academic researches for it in view of consumer behavior. In this paper, we analyze factors which determine consumer's attitude toward and intention of participation in Internet group buying by comparison of Internet individual one. For this purpose, we propose “lowering price”, “decreasing risk” and “reducing transaction cost” as relative advantages and "lack of product assortment" and "delay of time" as relative disadvantages over individual buying on the Internet. For empirical test, Internet users who have some experiences of individual buying but not group ones on the Internet are surveyed and analyzed. In result, a satisfying model fitness for structural equation model is derived and most hypotheses except the relationship between "decreasing risk" and "attitude toward Internet group buying" are accepted. Our results provide not only academic contribution by suggestion of a research framework but also practical insight by discussion of diverse features in Internet group buying.verse features in Internet group buying.

• Journal of the Optical Society of Korea
• /
• v.20 no.2
• /
• pp.234-238
• /
• 2016

A new method to design a low distortion, even relative illumination, optical see-through head-mounted display (HMD) with a freeform reflective mirror (FFRM) based on the two similar ellipsoids structure is proposed. The HMD we have realized has a simple structure which consists of two similar ellipsoid surfaces, an FFRM, a 7-piece co-axis relay lens, and an OLED. This structure can be applied to offset distortion, reach even relative illumination, and correct the off-axis aberrations. The HMD we finally have realized has a near 3% low distortion, a higher than 80% relative illumination, and a 40°×30° field of view (FOV).

• International Journal of High-Rise Buildings
• /
• v.10 no.2
• /
• pp.99-107
• /
• 2021

This research investigates the potential of Adaptive TMDs for tall building damping. The Adaptive TMD under consideration is based on real-time controlled hydraulic dampers generating purely dissipative control forces. The control approach is designed to enhance the Adaptive TMD efficiency for moderate wind loads with return periods below 50 years. The resulting enhanced TMD efficiency is used to reduce the pendulum mass by 15% compared to the passive TMD while still guaranteeing the acceleration limits of the one and ten year return period winds. Furthermore, the adaptive control approach is designed to disproportionally increase the controlled damping force at wind loads with return periods of 50 years and more in order to reduce the maximum relative motion of the Adaptive TMD with only 85% pendulum mass. Compared to the passive TMD with 100% pendulum mass the maximum relative motion is reduced by 20%. Both the pendulum mass reduction and the maximum relative motion reduction significantly reduce the foot print of the Adaptive TMD which is highly desirable from the economic point of view.

• Journal of architectural history
• /
• v.21 no.3
• /
• pp.29-44
• /
• 2012

If cultural Heritageis located in the downtown, conservation areas was developed or is being developed In most cases Therefore, in this case, the relative height of the building during construction than the regulatory limit is reasonable, is emerging need to be objectified. This study was utilizes GIS analysis techniques for 'View Corridor' and building height standards were determined. First, 'View Corridor' set and building height restrictions for the analysis of urban environmental factors were analyzed in. In particular, the topography and urban planning, and existing buildings, including the distribution of the physical urban environment, with detailed analysis on the major historical and cultural assets with a combination of a review of the impact factor for the formation of the urban landscape recognize the scope has been expanded. Second, the key selection criteria for View point largely focused on cultural Heritageand the surrounding communicative point of view and, consequently, connectivity, and symbolism, accessibility, analysis, factors such as Prospect, setting the standards by applying a detailed assessment of each item the main view point were derived. Third, the derived key View point on the terrain and landscape characteristics simulation analysis carried out by considering together the main axis, and this suggests a reasonable height for the proposed standards.

• Journal of Distribution Science
• /
• v.14 no.10
• /
• pp.165-178
• /
• 2016

Purpose - This study aims to empirically verify the impact of media richness, social presence, and prior life satisfaction on various continual usage or withdrawal behaviors of SNS users via both a positive path of satisfaction and a negative path of relative deprivation. By identifying these causal paths, we observe dynamic interactions of SNS user psychology in a balanced view, and provide some implications about design principles for SNS providers. Research design, data, and methodology - We developed 16 hypothesis based on media richness theory, social presence theory, social comparison theory, the literature about relative deprivation, and the literature about the various reactions of IS users. The rich SNS media, social presence recognition among peer SNS users, and prior life satisfaction could generate positive experience, attitude, and virtuous behavioral intentions among SNS users. At the same time, rich media, low social presence, and low prior life satisfaction could generate relative deprivation and could increase withdrawal behavioral intentions such as refusal to provide information, misrepresentation of information, and removal of uploaded information in SNS. Scenario surveys were conducted to collect data from potential SNS users. Data from 357 surveys were collected and analyzed through a PLS algorithm to test the hypotheses. Results - Media richness, social presence, and prior life satisfaction could significantly increase perceived enjoyment, satisfaction, and behavioral intention of continual usage and knowledge sharing. They also could significantly decrease refusal and misrepresentation intention. Relative deprivation is significantly decreased only by prior life satisfaction. Relative deprivation could not significantly decrease satisfaction, but it could significantly increase misrepresentation and removal intention, which could be regarded as information distortion intention. Conclusions - SNS providers should focus on developing rich media and social presence support because these two variables could impact the positive experiences of SNS users. Moreover, the positive experiences could heavily influence SNS user behavior. Some management is needed to prevent relative deprivation and its consequences of misrepresentation and removal intention. SNS providers should prevent SNS users from excessive image misrepresentation and removal as this information distortion could be the source of relative deprivation.

• The Journal of Korea Robotics Society
• /
• v.14 no.3
• /
• pp.170-178
• /
• 2019

This paper proposes a parking space detection method for autonomous parking by using the Around View Monitor (AVM) image and Light Detection and Ranging (LIDAR) sensor fusion. This method consists of removing obstacles except for the parking line, detecting the parking line, and template matching method to detect the parking space location information in the parking lot. In order to remove the obstacles, we correct and converge LIDAR information considering the distortion phenomenon in AVM image. Based on the assumption that the obstacles are removed, the line filter that reflects the thickness of the parking line and the improved radon transformation are applied to detect the parking line clearly. The parking space location information is detected by applying template matching with the modified parking space template and the detected parking lines are used to return location information of parking space. Finally, we propose a novel parking space detection system that returns relative distance and relative angle from the current vehicle to the parking space.

• The Journal of Korea Robotics Society
• /
• v.12 no.1
• /
• pp.33-41
• /
• 2017

We present a region-based approach for accurate pose estimation of small mechanical components. Our algorithm consists of two key phases: Multi-view object co-segmentation and pose estimation. In the first phase, we explain an automatic method to extract binary masks of a target object captured from multiple viewpoints. For initialization, we assume the target object is bounded by the convex volume of interest defined by a few user inputs. The co-segmented target object shares the same geometric representation in space, and has distinctive color models from those of the backgrounds. In the second phase, we retrieve a 3D model instance with correct upright orientation, and estimate a relative pose of the object observed from images. Our energy function, combining region and boundary terms for the proposed measures, maximizes the overlapping regions and boundaries between the multi-view co-segmentations and projected masks of the reference model. Based on high-quality co-segmentations consistent across all different viewpoints, our final results are accurate model indices and pose parameters of the extracted object. We demonstrate the effectiveness of the proposed method using various examples.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.4
• /
• pp.1003-1011
• /
• 2016

In this paper, a new algorithm by using 3D warping technique to effectively fill holes that are produced when creating a virtual-viewpoint image is proposed. A hole is defined as the region that cannot be seen in the reference view when a virtual view is created. In the proposed algorithm, to reduce the blurring effect that occurs on the hole region filled by conventional algorithms and to enhance the texture quality of the generated virtual view, Exemplar Based In-painting algorithm is used. The boundary noise which occurs in the initial virtual view obtained by 3D warping is also removed. After 3D warping, we estimate the relative location of the background to the holes and then pixels adjacent to the background are filled in priority to get better result by not using only adjacent object's information. Also, the temporal inconsistency between frames can be reduced by expanding the search region up to the previous frame when searching for most similar patch. The superiority of the proposed algorithm compared to the existing algorithms can be shown through the experimental results.