• Plant Resources
• /
• 제6권3호
• /
• pp.178-182
• /
• 2003

This study was conducted to investigate the relationship between yearly variations of climatic elements and yearly variations of productivity in perilla. In addition, correlation coefficients among yield and yield components were estimated. The data of yield and yield components were investigated for 10 years from 1991 to 2000. The meteorological data gathered at the Yeosu Weather Station for the same period were used to find out the relationships between climatic elements and productivity. Yearly variation of the amount of precipitation in September was large with coefficients of variation(c. v.) of 11.1%, but the coefficient of variance(c. v.) in July and August were relative small with 1.8, 2.1%, respectively. Number of cluster per hill and weight of 1,000 grains were greatly with c. v. of 76.1, 79.3%, respectively, but the coefficients of variance(c. v.) of plant height and seed yield were more less with 9.58, 10.60%, respectively. Correlation coefficients between precipitation of September and seed yield were positively significant correlation at the level of 5.1%, respectively, but the duration of sunshine in September and seed yield were negatively significant at the level of 5.1%, respectively. Correlation coefficients of these, the plant height, number of branches per plant, cluster length, number of cluster per hill, weight of 1,000 grains and seed yield were positively significant at the level of 5.1% respectively.

• 한국산학기술학회논문지
• /
• 제8권1호
• /
• pp.143-150
• /
• 2007

본 연구는 우리나라 서비스화의 특징을 분석하기 위하여 서비스화에 대한 유력한 설명인 수요편향가설 및 Baumol 가설을 우리나라 경험과 비교하였다. 이를 위하여 Baumol의 모형을 확장하여 패널 GMM방식으로 고용함수를 추정하였다. 분석결과를 요약하면 다음과 같다. 첫째, Clark의 수요편향가설을 살펴보기 위하여 1인당 GDP증가와 서비스고용간의 상관관계를 살펴본 결과 서비스화에 있어 소득증가가 절대적인 역할을 수행한다는 Clark의 수요편향가설을 우리나라의 경우에도 확인할 수 있었다. 둘째, 서비스화에 있어서 생산성격차를 강조하는 Baumol의 가설은 도소매, 음식 및 숙박서비스를 제외하고 모든 서비스분류에서 확인할 수 있었다. 즉 제조업과 각 서비스산업의 노동생산성격차가 확대될수록 서비스업의 고용이 증가한다는 사실을 우리나라의 경우에도 확인할 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.165-168
• /
• 2002

In most shipyards, the measurement of 3-dimensional relative position of pipes should be connected in the block depends on the manual operation. It results a very tedious and inefficient procedure, thus the proper measurement system is needed to improve productivity and accuracy. This paper describes the development results of pipe measurement system including system concepts, measuring procedures, system calibration, and its accuracy and productivity. And also, the possibility and things to be improved for application in shipyard are discussed in this paper.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권3호
• /
• pp.171-176
• /
• 2010

This paper proposes the application of sensor technology to assemble ship blocks efficiently. A sensor-based monitoring system is designed and implemented to improve shipbuilding productivity by reducing the labor cost for the adjustment of adequate positioning between ship blocks during pre-erection or erection stage. For the real-time remote monitoring of relative distances between two ship blocks, sensor nodes are applied to measure the distances between corresponding target points on the blocks. Highly precise positioning data can be transferred to a monitoring server via wireless network, and analyzed to support the decision making which needs to determine the next construction process; further adjustment or seam welding between the ship blocks. The developed system is expected to put to practical use, and increase the productivity during ship blocks assembly.

• 한국병원경영학회지
• /
• 제2권1호
• /
• pp.22-47
• /
• 1997

This paper evaluated the relative efficiency of 33 provincial medical centers using Data Envelopment Analysis(DEA) and compared the DEA efficiency results with those of the current method conducted by the management evaluation team. DEA Was selected as an alternative efficiency evaluation method since it could handle multiple inputs and multiple outputs simultaneously and identify the sources of inefficiency. To analyze the sensitivity of productivity values to the variable sets, four different sets of input and output variables were identified. Results showed that most of the medical centers are operating far away from the efficiency frontier supporting the previous results. Some centers showed 100% efficiency regardless of the selected variable sets. DEA results are compared with current management evaluation results. Some inconsistencies were found for some DMUs between the results of two methods showing the existence of methodology bias. DEA results and ratio analyses results mostly agree for 1992 data.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.187-192
• /
• 2005

Pleurotus eryngii(King oyster) is one of the most promising mushrooms being produced on the domestic farms. The quality as well as quantity of Eryngii is sensitively affected by micro climate factors. To safely produce high-quality Eryngii all the year round, it is required that the environmental factors be carefully controlled by well designed structures equipped with various facilities and control systems. This study was carried out at the commercial mushroom cultivation houses to find out reasonable range of each environmental factor and yield together with economic and safe structures influencing on the optimal productivity of Eryngii. This experiment was conducted from Nov. 10, 2004 to Aug. 27, 2005 in Eryngii. cultivation houses. The environmental factors measured for this study were inside/outside temperature, relative humidity and $CO_2$ concentration in Pleurotus eryngii medium. In addition, the yield and quality of mushroom were made investigation. But the optimal productivity will be evaluated by considering the quality and quantity of mushroom production, energy requirements, facility construction and management cost, etc.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.62-63
• /
• 2016

Existing studies relative to enhancing sustainability of earth-work are mainly involved in the performance of construction equipments. They assume that there is no variation of the engine power and fuel consumption and classify the dozer operation into working and idle conditions. They enable to find the most eco-friendly equipment fleet deployment plan. However, they are confined in that they do not provide a measure to assess the sustainability of the operation plan and suggest optimal alternative(s). This paper presents a method that identifies an optimal dozer operation plan that assures sustainability by reducing fuel consumption of the equipment. The method computes the dozer operation productivity using engine-torque-output map provided by equipment manufacturers. Indeed, it identifies the eco-dozing operation that minimizes fuel consumption and maximizes the target productivity.

• 아태비즈니스연구
• /
• 제3권2호
• /
• pp.42-48
• /
• 2012

This paper examined structural changes in export specialization of Japan, South Korea, Taiwan, and China at different levels of technological intensity. The study found significant differences across these Asian economies, with most pronounced changes for exports with high technological intensity. To account for the changing export specialization, the study applied the classical Ricardian model of comparative advantages to export patterns of Japan and South Korea. We found that the export specialization of Japan was mainly determined by differences in fixed effects across industrial sectors, with changes in relative labor productivity much less important. In contrast, changes in productivity turned out an essential factor for explaining the recent export specialization of South Korea.

• 대한안전경영과학회지
• /
• 제1권1호
• /
• pp.259-272
• /
• 1999

In order to enhance the selectivity, productivity and yield of methyl fructoside, which was synthesized by enzymatic glycosylation of sucrose and methanol solution, controlling of surface property of solid support using different immobilization procedures optimized microenvironment of immobilized invertase. Silanization and polyethylene imine coating methods were adopted to give a hydrophobic and hydrophilic environment of immobilized invertase. As a result, polyethyleneimine coating method gave higher loading of enzyme, effective activity, and relative activity than silanization method, because it brought on increasing the functional density of amino group and enhancing the conservation of activity by regulating of hydrophilicity. And then, hydrophilic environment was possible to restraint the assessing of methyl fructoside molecule, which was more hydrophobic than sucrose, fructose, and glucose molecule in the reaction mixture, into .the active site of immobilizedinvertase. Consequently, hydrophilic microenvironment of immobilized invertase by polyethyleneimine coating obtained higher yield and productivity with increasing conversion than silanized and native invertase. Thus, this procedure optimized the microenvironment of immobilized invertase suitable for the enzymatic synthesis of methyl fructoside.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권6호
• /
• pp.363-375
• /
• 2001

Chromatography has been method of choice for the separation complex biologi-cal mixtures fro analytical purpose, particularly for the last fifty years. Its use has recently been extended to preparative separation where the productivity relative to the amount of resin and sol-vent used is a matter of concern. To overcome the inherent thermodynamic inefficiency of batch chromatography, as exemplified by the partial temporal usage of the resin and dilution of the product with the solvent, chromatography has been continually modified by separation engineers. Column switching and recycling represnet some of the process modifications that have brought high productivity to chromatography. Recently, the simulated moving bed (SMB) method, which claims a high separation efficiency based on counter-current moving bed chromatography. has be-come the mainstay of preparative separation, especially in chiral separation. Accordingly, this pa-per reviews the current status of SMB along with several chromatographic modification, which may be helpful in routine laboratory and industrial chromatographic practices.