• Journal of Digital Convergence
• /
• v.16 no.8
• /
• pp.71-79
• /
• 2018

This study discussed the meaning of a drone, and especially drone journalism and legal and ethical issues around that, at an introductory dimension, which is used in various social bases, but is still just an academic discussion at the beginning stage. As a methodology, content analysis was used. It seems that drone journalism has high diffusibility as a technology with high 'relative advantage', 'compatibility', 'trial ability' and 'observability' and low 'complexity' in terms of the diffusion of innovation theory. However, it will be very likely that controversies will be raised, such as safety issue due to collision and crash, a dispute over violation of privacy that may seriously infringe privacy like individual portrait rights and a controversy about the accuracy and source of information as drone filming low price and ease of use. Suggest solutions to legal and ethical issues based on existing research. Technical stability is required. Also, it is necessary to change the awareness of journalists about the drones coverage and to educate ethics, and it is necessary to establish social public opinion on issues such as privacy violation and establish system and legal measures through it. Future research is expected to carry out empirical research including journalists and public awareness surveys.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.4
• /
• pp.29-41
• /
• 2014

The Korean government has purchased land properties alongside any significant water bodies before setting up the buffers to secure water qualities. Since the annual budgets are limited, however, there has always been the issue of which land parcels ought to be given the priority. Therefore, this study aims to develop efficient mechanism for land acquisition priorities in stream corridors that would ultimately be vegetated for riparian buffer zones. The criteria of land acquisition priority were driven through literary review along with experts' advice. The relative weights of their value and priorities for each criterion were computed using the Analytical Hierarchy Process(AHP) method. Major findings of the study are as follows: 1. The decision-making structural model for land acquisition priority focuses mainly on the reduction of non-point source pollutants(NSPs). This fact is highly associated with natural and physical conditions and land use types of surrounding areas. The criteria were classified into two categories-NSPs runoff areas and potential NSPs runoff areas. 2. Land acquisition priority weights derived for NSPs runoff areas and potential NSPs runoff areas were 0.862 and 0.138, respectively. This implicates that much higher priority should be given to the land parcels with NSPs runoff areas. 3. Weights and priorities of sub-criteria suggested from this study include: proximity to the streams(0.460), land cover(0.189), soil permeability(0.117), topographical slope(0.096), proximity to the roads(0.058), land-use types(0.036), visibility to the streams(0.032), and the land price(0.012). This order of importance suggests, as one can expect, that it is better to purchase land parcels that are adjacent to the streams. 4. A standard scoring system including the criteria and weights for land acquisition priority was developed which would likely to allow expedited decision making and easy quantification for priority evaluation due to the utilization of measurable spatial data. Further studies focusing on both point and non-point pollutants and GIS-based spatial analysis and mapping of land acquisition priority are needed.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1523-1523
• /
• 2001

The wine industry requires practical methods for objectively measuring the composition of both red wine grapes on the vine to determine optimal harvest time; and of freshly harvested grapes for efficient allocation to vinery process streams for particular red wine products, and to determine payment of contract grapegrowers. To be practical for industry application these methods must be rapid, inexpensive and accurate. In most cases this restricts the analyses available to measurement of TSS (total soluble solids, predominantly sugars) by refractometry and pH by electropotentiometry. These two parameters, however, do not provide a comprehensive compositional characterization for the purpose of winemaking. The concentration of anthocyanin pigment in red wine grapes is an accepted indicator of potential wine quality and price. However, routine analysis for total anthocyanins is not considered as a practical option by the wider wine industry because of the high cost and slow turnaround time of this multi-step wet chemical laboratory analysis. Recent work by this ${group}^{l,2}$ has established the capability of near infrared (NIR) spectroscopy to provide rapid, accurate and simultaneous measurement of total anthocyanins, TSS and pH in red wine grapes. The analyses may be carried out equally well using either research grade scanning spectrometers or much simpler reduced spectral range portable diode-array based instrumentation. We have recently expanded on this work by collecting thousands of red wine grape samples in Australia. The sample set spans two vintages (1999 and 2000), five distinct geographical winegrowing regions and three main red wine grape varieties used in Australia (Cabernet Sauvignon, Shiraz and Merlot). Homogenized grape samples were scanned in diffuse reflectance mode on a FOSE NIR Systems6500 spectrometer and subject to laboratory analysis by the traditional methods for total anthocyanins, TSS and pH. We report here an analysis of the correlations between the NIR spectra and the laboratory data using standard chemometric algorithms within The Unscrambler software package. In particular, various subsets of the total data set are considered in turn to elucidate the effects of vintage, geographical area and grape variety on the measurement of grape composition by NIR spectroscopy. The relative ability of discrete calibrations to predict within and across these differences is considered. The results are then used to propose an optimal calibration strategy for red wine grape analysis.

• International Commerce and Information Review
• /
• v.13 no.3
• /
• pp.77-95
• /
• 2011

This paper investigates the relationship between export and economic variables such as trade insurance, world economy activity, relative price, unemployment rate, exchange rate volatility, using monthly data. I employ Johansen cointegration methodology since the model must be stationary to avoid the spurious results. The results indicate that there is a long-run relationship between export and variables. Also, the empirical analysis of cointegrating vector using the CCR, DOLS, FMOLS reveals that the increases of trade insurance has positive relations and the increases of exchange rate volatility have negative relations with export. Especially, DOLS based on Monte Carlo simulations, of this estimator being superior in small samples compared to a number of alternative estimators, as well as being able not only to accommodate higher orders of integration but also to account for possible simultaneity within regressors of a potential system. This paper also applies impulse-response functions to get the additional information regarding the responses of the export to the shocks of the variables. The result indicates that export positively to trade insurance and then decay fast compare with exchange rate volatility. Consequently, trade insurance plays the role of trade policy for export promotion in Korea. Whereas, increase of exchange risk result in reduction of export. Therefore, the support of trade insurance should be expanded and the stabilization of the foreign exchange market must be done for the export promotion.

• Economic and Environmental Geology
• /
• v.53 no.2
• /
• pp.213-220
• /
• 2020

When CO₂ foam is injected into the saline aquifer, the relative permeability of CO₂ decreases and its viscosity increases, thereby reducing mobility in porous media and ultimately improving CO₂ storge with enhanced sweep efficiency. In general, surfactants were used to fabricate CO₂ foam. Recently, nanoparticles have been used to form stable foam than surfactant. This paper introduces CO₂ storage technology using nanoparticle stabilized CO₂ foam. If the surface of the hydrophilic nanoparticles is partially modified into a CO₂-philic portion, the particles have an affinity for CO₂ and water, thus forming a stable CO₂ foam even in deep saline aquifers under high temperature and high salinity conditions, thereby it can be stored in the pores of the rock. In terms of economics, injection method using nanopaticle-stabilized CO₂ foam is more expensive than the conventional CO₂ injection, but it is estimated that it will have price competitiveness because the injection efficiency is improved. From an environmental point of view, it is possible to inject chemical substances such as surfactants and nanomaterials into aquifers or reservoirs for specific purposes such as pollutant removal and oil production. However, some studies have shown that nanoparticles and surfactants are toxic to aquatic animals, so environmentally proven substances should be used. Therefore, further research and development will be needed to study the production and injection of nanoparticle-stabilized CO₂ foam that are environmentally safe and economically reasonable.

• Analytical Science and Technology
• /
• v.7 no.3
• /
• pp.339-347
• /
• 1994

A multicolumn system consisted of two valve(10-port and 6-port valve)-three column (28% DC 200, SP 1700 and Chromosorb 102 column) was developed. Nine natural gas components composed of $N_2$, $CH_4$, $CO_2$, $C_2H_6$, $C_3H_8$, $i-C_4H_{10}$, $n-C_4H_{10}$, $i-C_5H_{12}$ 및 $n-C_5H_{12}$ completed all the baseline separation within 18 minutes. The accuracy and the precision of this system was tested. The retention times and the peak areas were determined with a repeatability between 0.02 and 0.16%, and less than 1%, respectively. Calibration curves for natural-gas components were plotted by the partial pressure injection method of pure gases, and good linear relationships for each component were presented. By using these calibration curves the accuracy of the multicolumn system compaired with that of the single column system for a certified standard gas of natural gas. As a result, relative error in the single and the multicolumn system was less than 0.5% and 0.04%, respectively. The result of application of this system in the analysis of importing LNG composition showed that the heating values calculated by the multicolum system were estimated lower compared with those calculated by the single column system and consequently, the importing price of LNG was able to be cut down.

• Environmental and Resource Economics Review
• /
• v.13 no.2
• /
• pp.219-243
• /
• 2004

Generally, electricity market has monopoly market structure because of need of enormous investment for infrastructure. However, the introduction of competition in network industry as electricity is a tendency of the world with decreasing the effects of economy of scale due to the advancement of technology. Now, electricity industry restructuring is in progress but the competition in electricity retail market is not in force yet in Korea. Whether a effective competition exist or not is very important to policy decision maker who drive restructuring, but there are small numbers of quantitative researches on that. In this study, we estimated the effectiveness of competition in the electricity retail market through switching costs. If switching costs are high, consumers actually can be locked in incumbent firm in spite of introduction of competition. Therefore switching is a critical factor to determine effectiveness of competition and to estimate the size of switching costs quantitatively can proffer the information about whether the competition in the electricity retail market is effective or not in the future. We estimated switching costs using consumer' stated-preference data by conjoint analysis. In according to estimation results, the cost of switching process is not so high, but the relative brand loyalty of an incumbent company is significantly high. And the price is considered as the most important factor choosing an electric service commodity. Based on the empirical results, it is possible to analyze the relationship between suppliers' competitiveness resulted from management efficiency and customers' switching possibilities. The paper therefore provides guidance for suppliers in deciding to enter into retail competition and for policy makers in introducing retail competition. And it has a significance of estimating the switching costs directly.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.4
• /
• pp.173-182
• /
• 2019

This study attempts to improve the understanding of the rapidly growing online video platform market such as Youtube and OTT, and to investigate the attributes and relative importance of them. For this purpose, the factors that influence the choice to use were derived through literature studies and the Focus Group Interview (FGI), and the priority of the factors was calculated through the analytic hierarchy process (AHP). The upper layer of the AHP structure was 'Relationship', 'Entertainment', 'Informativity', and 'Convenience', and the lower layer was structured into 13 elements. The importance priority analysis among the factors that influence the choice to use was done by teenagers, 20s, and 30s and the results are summarized as follows : First, Users consider the 'Just for fun' and 'Satisfaction of interests' as the most important factors, followed by 'Easy accessibility to use', 'Vicarious satisfaction', 'Usefulness of Information', and 'Up-to-dateness of information'. Second, the ranking of the upper layer was in the order of 'Entertainment'-'Informativity'-'Convenience'-'Relationship'.As a result of AHP,'Entertainment' was 3.6 times more important than 'Relationship'. In the comparison by age group, only teenagers regarded that 'Convenience' is more important than 'Informativity'. According to the characteristics of the age group, the lower layer of teenagers consider 'Convenient function' to be important and ranked 'Usefulness of information' in 8^th. While 'Vicarious satisfaction' ranked 4th out of 13 factors in the entire age group, those in their 20s and 30s ranked 8^th, showing a difference. In the case of 20s, 'Reasonable price' was ranked 4th and the 'Diversity of Information' was ranked 5th, Otherwise 30s consider 'Trustworthiness of Information' to the third. Third, unlike 'Convenience' which was the lower-rank in the upper layer AHP analysis, 'Easy accessibility to use', the lower-layer of convenience, ranked third overall in the importance analysis among the 13 lower-layer factors, and showed a similar patterns in the age groups results. In the conclusion, this study demonstrates that 'Convenience' and 'Vicarious satisfaction' factors, which were not relatively well addressed in the previous studies, are the key factors to be considered in. By presenting the results of the importance analysis on each of the selected attributes, This study has a practical implication that Industries such as on-line video service platform provider can use the importance priority in establishing the directions of future strategy.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.473-476
• /
• 2008

Due to the pursuit of high function and international price increase in the field of construction, the application of the secondary product using cement is on the increase gradually in the construction industry in the pursuit of economic cost reduction by the shortening of the construction time like Expediting and the dry construction method at the same time. However, it is in very urgent situation of measures to improve the structural performance or durable performance because it is limited for use in terms of panel in interior exterior building or functional repair reinforce as yet. Accordingly, this study is to investigate applicability of permanent Formwork like mould with the structural performance or excellent durable performance in the field of construction, and to derive optimum mixture in the performance and quality of manufacture. As a result of analysis comparison with the dynamic and durable properties of vacuum extrusion molding high toughness cement panel according to the mixture of four conditions, this study has found that the test body of mixing ECC-DP3 using small filler and large granulated blast furnace slag and powder flame retardant had excellent relative hardness and bending stress strain. The durable performance has shown excellent tendency by the decrease of porosity and enhancement of water-tightness.

• Journal of Korean Society for Geospatial Information Science
• /
• v.7 no.2 s.14
• /
• pp.123-132
• /
• 1999

With the rapid increases of the amount of data and computing, the parallelization of the computing algorithm becomes necessary more than ever. However the parallelization had been conducted mostly in a super-computer until the rod 1990s, it was not for the general users due to the high price, the complexity of usage, and etc. A new concept for the parallel processing has been emerged in the form of K-clustering form the late 1990s, it becomes an excellent alternative for the applications need high computer power with a relative low cost although the installation and the usage are still difficult to the general users. The mapping algorithms (cut, join, resizing, warping, conversion from raster to vector and vice versa, etc) in GIS are well suited for the parallelization due to the characteristics of the data structure. If those algorithms are manipulated using PC-clustering, the result will be satisfiable in terms of cost and performance since they are processed in real flu with a low cos4 In this paper the tools and the libraries for the parallel processing and PC-clustering we introduced and how those tools and libraries are applied to mapping algorithms in GIS are showed. Parallel programs are developed for the mapping algorithms and the result of the experiments shows that the performance in most algorithms increases almost linearly according to the number of node.