• 한국분말재료학회지
• /
• 제15권3호
• /
• pp.204-209
• /
• 2008

Aluminum alloys are not only lightweight materials, but also have excellent thermal conductivity, electrical conductivity and workability, hence, they are widely used in industry. It is important to control and enhance the densification behavior of metal powders of aluminum. Investigation on the extrusion processing combined with equal channel angular pressing for densification of aluminum powders was performed in order to develop a continuous production process. The continuous processing achieved high effective strain and full relative density at $200^{\circ}C$. Optimum processing conditions were suggested for good mechanical properties. The results of this simulation helped to understand the distribution of relative density and effective strain.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2006년도 총회 및 춘계학술발표회
• /
• pp.220-223
• /
• 2006

To investigate the effect of solution pH and particle size of Na-bentonite on swelling characteristics and relative hydraulic conductivity, four kinds of acids and two alkali were selected. The results showed that the swelling was decreased to half of the original Na-bentonite's swelling index. Also the decrease in SI was most distinctive in pH 3.5 of HCl. But changes of swelling index between initial and stabilized were minimal in alkali treatment, compared to the change by acid treatment. No flux was detected under atmospheric pressure although there was drastic decrease in swelling. However, leaching started after application of 1.5 bars of air-pressure equivalent to 15 m of water head.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.347-349
• /
• 1999

We have fabricated insulating thin films using p-hexadecoxyphenol(p-Hp) that was formed phenol-formaldehyde resin of crosslinked structure from reaction with formaldehyde by LB technique. For fabricated MIM device, the possibility for insulating layers of electronic were investigated by electrical properties of their LB films according to crosslinking of LB films current-voltage (I-V) properties and frequency-capacitance (C-F) characteristics. We have provided evidence for the high insulating performance of phenol-formaldehyde thin films by the LB method. Conductivity of their LB films was as follows: pure water > 1 % aq. Formaldehyde > heat treatment, in the current-voltage (I-V) characteristics. It is demonstrated that insulation properties of crosslinked p-HP LB films were improved. In capacitance-frequency properties, the heat-treated p-HP LB films for crosslinking showed a low relative dielectric constant.

• Journal of Plant Biotechnology
• /
• 제38권3호
• /
• pp.203-208
• /
• 2011

We transferred Dhn5 (dehydrin5) gene from barley to poplar to determine the effect of its expression on the transgenic poplars. The results from northern blot analysis showed that the expression level of gene varied among the transgenic lines. During their culture on tissue culture media, the transgenic poplars formed vigorous growing callus in the presence of 5% PEG. When the transgenic poplars were growing in pots and witheld watering, they stayed much healthier than nontransgenic poplars. The transgenic poplars showed higher rates of photosynthetic rates, stomatal conductance and evaporation rates under the drought stress, although there was no significant difference in soil water content within the treatments. The relative electrical conductivity of the transgenic poplars after 20% PEG treatment was lower than that of nontransgenic poplars. The results provide evidence that the expression of hvDhn5 gene conferred drought tolerance in the transgenic poplars.

• Advances in Energy Research
• /
• 제8권4호
• /
• pp.253-264
• /
• 2022

This paper deals with the effects of design (active area, current density, membrane conductivity) and operating parameters (temperature, relative humidity) on the performance of hydrogen-fuelled proton exchange membrane (PEM) fuel cell. The design parameter of a PEM fuel cell with the active area of the single cell considered in this study is 25 cm² (5 × 5). The operating voltage and current density of the fuel cell were 0.7 V and 0.5 A/cm² respectively. The variations of activation voltage, ohmic voltage, and concentration voltage with respect to current density are analyzed in detail. The membrane conductivity with variable relative humidity is also analyzed. The results show that the maximum activation overpotential of the fuel cell was 0.4358 V at 0.21 A/cm² due to slow reaction kinetics. The calculated ohmic and concentrated overpotential in the fuel cell was 0.01395 V at 0.76 A/cm² and 0.027 V at 1.46 A/cm² respectively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2182-2187
• /
• 2007

The relative contributions of phonon and electron to the thermal conductivity of silicon film with varying doping density are evaluated from the modified electron-phonon interaction model, which is applicable to the micro/nanoscale simulation of energy transport between energy carriers. The thermal conductivities of intrinsic silicon layer thicknesses from 20 nm to 500 nm are calculated and extended to the variation in n-type doping densities from 1.0 ${\times}$ $10^{18}$ to 5.0 ${\times}$ $10^{20}$ $cm^{-3}$, which agree well with the experimental data and theoretical model. From simulation results, the phonon and electron contributions to thermal conductivity are extracted. The electron contribution in the silicon is found to be not negligible above $10^{19}$ $cm^{-3}$, which can be classified as semimetal or metal by the value of its electrical resistivity at room temperature. The thermal conductivity due to electron is about 57.2% of the total thermal conductivity at doping concentration 5.0 ${\times}$ $10^{20}$ $cm^{-3}$ and silicon film thickness 100 nm.

• 한국가구학회지
• /
• 제27권2호
• /
• pp.122-127
• /
• 2016

The increasing interest in the environment and climate change around the globe, while the importance of building energy saving is increasing. The building energy simulation program is used for evaluating of energy performance of buildings. However, an input value of wood thermal conductivity in the programs is different from each other. Therefore, in this study, wood thermal conductivity was measured according to species. Through construction database by species of wood, the error of simulation program are able be decreased. In addition, if used as a structural and interior of buildings, the thermal conductivity and moisture of the wood is difficult to apply to the program because they were changed according to the occupant's lifestyle. In this paper, thermal conductivity and moisture content.of wood confirmed changes in the constant temperature and relative humidity ($25^{\circ}C$, 50% R.H.) condition.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2001년도 한국우주과학회보 제10권1호
• /
• pp.55-55
• /
• 2001

No Abstract, See Full Text

• Korean Chemical Engineering Research
• /
• 제56권1호
• /
• pp.1-5
• /
• 2018

본 연구에서는 고분자전해질 연료전지(PEMFC)가 실제 구동되는 고전류밀도 범위까지 임피던스를 분석해 이온전도도에 대해 연구하였다. 가스확산층(GDL)유무가 임피던스에 미치는 영향을 수소투과도 측정에 의해 간접적으로 검토하였다. 저전류 범위(<$80mA/cm^2$)에서 상대습도(RH)가 60% 이상 높을 때는 고분자 막의 수분 함량이 충분해 막의 이온전도도가 전류 변화의 영향을 받지 않았다. 그러나 RH가 낮을 때는 전류밀도가 증가하면서 수분 생성에 의해 이온전도도가 증가했다. 고전류 영역($100{\sim}800mA/cm^2$)에서 HFR (High Frequency Resistance)로 구한 막의 이온전도도 실험값과 수치해석에 의해 구한 값을 비교하였다. RH 100%에서는 실험값과 모사한 값 모두 전류 변화에 영향을 받지 않고 일정한 이온전도도를 유지함을 보였다. RH 30~70%에서는 전류밀도 증가에 따라 이온전도도가 증가하다 일정해 지는 경향을 나타냈다.

• 한국전기전자재료학회논문지
• /
• 제13권4호
• /
• pp.300-305
• /
• 2000

We have investigated the dielectric and electrical characteristics of palmitic acid(PA) stearic acid(SA) and arachidic acid(AA) Langmuir-Blodgett(LB) films because these fatty acid systems have a same hydrophilic group and a different hydrophobic one(methylene group or alkyl chain length). The fatty acid systems were used as LB films and the status of the deposited films was confirmed by evaluating the transfer ratio the UV absorption and the capacitance. The dielectric characteristics such as the frequency-capacitance characteristics and the dielectric dispersion and absorption characteristics of PA SA and AA through-plane were measured. The relative dielectric constants of PA, SA and AA LB films were about 3.0~4.6, 2.7~3.0 and 2.4~3.0 respectively. That is the relative dielectric constants were decreased in proportion to the chain length of methylene group. Also the dielectric dispersion and absorption of each fatty acid LB films have arisen from spontaneous polarization of dipole polarization in the range of 10$^4$~10$^{5}$ ［Hz］. The conductivity of PA, SA and AA LB films obtained from I-V characteristics were about 9$\times$10$^{-14}$ , 3$\times$10$^{-14}$ and 5$\times$10$^{-15}$ ［S/cm］. respectively. These results have shown the insulating materials and could control the conductivity y changing the length of methylene group. Also we have confirmed that the barrier height of fatty acid systems were almost the same ones obtained from dielectric characteristics.