• 한국세라믹학회지
• /
• 제24권2호
• /
• pp.101-110
• /
• 1987

The relative electrical conductivity of vacuum deposited Al films on a soda-lime(2947) and an alumino boro silicate(7809) glass was investigated with the variation of the relative humidity,temperature and film thickness. The structure and microstructure of Al films before and after exposure to the humidity wereexamined by the X-ray Diffractormenter(XRD) and Scanning Electron Microscope(SEM). As the relative humidity increased, the electrical conductivity of Al films on both glasses was decreased. However, the Al films on 7809 glass showed higher conductivity than that of 2947 glass under the same testing conditions. The decreasing of electrical conductivity was caused by the formation of Aluminum hydroxide which was made by the reaction between the aluminum films and water vapor.

• 한국세라믹학회지
• /
• 제24권6호
• /
• pp.572-578
• /
• 1987

The vacuum evaporated Au films on soda-lime glasses were measured by the electrical conductivity with the variation of the annealing time, relative humidity, and temperature. Au films structures were observed by scanning Electron Microscope and X-ray Diffractometer. As the annealing time and temperature increased, the electrical conductivity was increased due to the migration or annihilation of defects, but the electrical conductivity was decreased as with the relative humidity increased. Au films by XRD and SEM examination showed the negligible effect of chemical reactions.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.319-322
• /
• 2009

This paper investigated environmental effects for passive, air-breathing, and vapor-feeding direct methanol fuel cells. In these experiments, experimental parameters are temperature($30^{\circ}C$, $40^{\circ}C$ and relative humidity(25%, 50%, 75%). From these experimental results, the water contents play a key role in terms of optimal ionic conductivity at the cathode catalyst layer. In case of pure methanol feeding, the performance is inversely proportional to the relative humidity. The water generation resulting from methanol crossover maintains ionic conductivity at the cathode. On the contrary, diluted methanol solution (50wt.%) lowers methanol crossover to the cathode. In order to increase ionic conductivity, the relatively high humidity is required to the cathode catalyst layer for the water generation. The relative humidity scales with the performance.

• 한국농공학회지
• /
• 제30권4호
• /
• pp.85-93
• /
• 1988

This laboratory study was carried out in order to produce fundamental data for analyzing salt movement and desalinization effects, using samples of silt loam soil collected in Gyehwado and Daeho reclaimed tidelans, and samples of silty clay loam soil collected in Kimie tideland. Desalinization experiments with gypsum treatment were performed to analyze changes of the hydraulicc conductivity with changes of the soil property and the salt concentration during the desalinization of reclaimed tideland soils by leaching through the subsufface drainage, and correlations between factors infl uencing the reclamation of salt affected soils were analyzed by the statistical method. The results were summarized as follows: 1. The reclaimed tideland soils used in this study were saline-sodic soils with the high exchangeable sodium percentage and the high electrical conductivity. 2. Changes of the hydraulic conductivity with the amount of leaching water and the leaching time elapsed were affected by the amount of gypsum except exchangeable sodium and clay contents. The regression equation between the depth of water leached per unit depth of soil (Dw / Ds : X) or the square root of the leaching time elapsed (T $^1$ $^2$ : X) and the relative hydraulic conductivity (HCr:Y) could be expressed in Y=a . bx. 3. The more exchangeable sodium and clay contents regardless of the amount of gypsum, the more the leaching time was required until a given volume of water was leached through the soil profile. The regression analysis showed that the relationship between the depth of water leached per unit depth of soil(Dw /Ds:X) and the square root of the leaching time elapsed(T$^1$$^2$ :Y) could be described by Y=a . Xb. 4. The hydraulic conductivity was influenced to a major degree by the salt concentration provided that the electrical conductivity was below 10 mmhos / cm during the desalinization of reclaimed tideland soils. The regression equation between the relative electrical conductivity ( ECr : X) and the relative hydraulic conductivity (HCr:Y) could be expressed in Y=a + b . X-$^1$. 5. In conclusion, the hydraulic conductivity, leaching requirements and the leaching time elapsed can be estimated when the salt concentration decreases to a certain level during the desalinization of reclaimed tidelands, and the results may be applied to the analysis of salt movement and desalinization effects.

• 대한토목학회논문집
• /
• 제33권6호
• /
• pp.2369-2379
• /
• 2013

불포화 조건에서 흙의 초기 밀도에 따라 흙-함수특성곡선이 변화시키게 되며, 이로 인하여 불포화 조건에서 투수특성도 변화하게 된다. 이에 대한 영향을 고찰하기 위하여 상대밀도 40%, 60% 및 75%의 주문진 표준사에 대한 건조 및 습윤과정에서의 흙-함수특성곡선(SWCC)과 불포화 투수계수함수를 산정하였다. van Genuchten (1980)의 방법을 이용하여 흙-함수특성곡선(SWCC)을 산정한 결과 공기유입값과 관계된 계수 ${\alpha}$는 습윤과정에서 더 큰 값을 가지며, 변곡점의 경사에 관계된 계수 n과 잔류함수비에 관계된 계수 m은 건조과정에서 더 큰 값을 갖는다. 그리고 상대밀도가 증가할수록 공기함입치는 증가하지만 수분함입치는 감소하며, 동일한 상대밀도에서 공기함입치는 수분함입치보다 크게 발생된다. 한편, 계수추정방법 가운데 하나인 van Genuchten (1980)의 방법을 적용하여 불포화 투수계수함수를 산정한 결과 불포화 투수계수는 포화시 투수계수로 일정하게 유지되다가 공기함입치 혹은 수분함입치 직전에 급격하게 감소하는 것으로 나타났다. 건조과정에서의 포화투수계수는 습윤과정에서의 포화투수계수보다 크게 나타나며, 상대밀도가 증가함에 따라 건조 및 습윤과정에서의 포화투수계수는 감소한다. 실험결과에 의하면 주문진 표준사의 초기 간극비에 따라 흙-함수특성곡선(SWCC)에서의 공기함입치(AEV)는 감소하고 포화투수계수는 증가하므로, 흙-함수특성곡선(SWCC)과 불포화 투수계수함수(HCF)는 초기 간극비에 영향을 받는 것으로 나타났다.

• 한국세라믹학회지
• /
• 제42권2호
• /
• pp.77-80
• /
• 2005

A series of proton conductive composite membranes based on poly(vinyl alcohol) and phosphosilicate gels powders were successfully prepared. The proton conductivity of these composite was attributed to the phosphosilicate gel, which derived from tetraethoxysilane and phosphoric acid by sol-gel process at a molar ratio of P/Si = 1.5. The proton conductivity increased with increasing both the content of phosphosilicate gel and relative humidity. Temperature dependence of conductivity showed a Vogel-Tamman-Fulcher type behavior, indicating that proton was transferred through a liquidlike phase formed in micropores of phosphosilicate gel. The high conductivity of 0.065 S/cm with a membrane containing 60 wt$\%$ of the gel was obtained at $60^{\circ}C$ at $90\%$ relative humidity.

• 한국산림과학회지
• /
• 제85권1호
• /
• pp.120-129
• /
• 1996

본 연구는 우리 나라 대표적인 향토수종의 하나인 신갈나무의 수분 생리적 특성을 밝히고자 하는 일련의 연구로서, 줄기, 가지, 분지부분, 그리고 정단부 1년생 소지에 있어서 상대수분통도성, Leaf specific conductivity(LSC), Huber value, Specific conductivity, 부위별 평균도관직경, 단위면적당 도관수 등을 측정하여 수체내 수분통도성의 공간적 배치구조(Hydraulic architecture)를 비교 고찰하였다. 1. 신갈나무의 상대수분통도성은 줄기에서 $2.5526{\times}10^{-12}{\sim}1.2260{\times}10^{-10}m^2$, 가지에서 $1.6279{\times}10^{-11}{\sim}6.8378{\times}10^{-11}m^2$의 범위로 나타냈다. 상대수분통도성은 줄기와 가지의 직경이 작아질수록 큰 값을 나타냈다. 정단부 1년생 소지에 있어서는 주지가 측지보다 평균 2배 이상 큰 값을 나타냈다. 2. LSC는 줄기 하부에서 작은 값을 나타냈고, 상부로 갈수록 큰 값을 나타냈다. 그리고 줄기가 가지보다 월등히 큰 값을 보였으며, 분지부분이 가장 작은 값을 나타냈다. 3. 분지부분의 수분통도성값은 분지형태(ㅏ형과 Y형)에 따라 차이를 보였다. ㅏ형의 분지부분에서는 상대수분통도성, LSC, Specific conductivity, 평균도관직경 등이 줄기가 가지 보다 2 배 이상 큰 값을 나타냈고, Y형에서는 1~1.5배 더 컸다. 4. 줄기의 LSC, Specific conductivity, Huber value는 직경이 작아질수록 증가하였다. 5. 정단부 1년생 소지에 있어서 LSC, Huber value, 평균도관직경은 주지가 측지보다 큰 값을 나타냈다. 6. 줄기의 부위별 평균도관직경은 줄기의 직경이 작아질수록 감소한 반면, 단위면적당 도관수($mm^{-2}$)는 많아졌다. 줄기에 있어서 도관직경은 직경이 작아질수록 조재부에서 급격하게, 만재부에서는 완만하게 감소하였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.341-345
• /
• 2004

An attempt has been made in this study to evaluate an applicability of Relative Effective Porosity Model (REPM) as a method for estimating saturated hydraulic conductivity (K$_{s}$) for homogeneous coarse, medium, and fine sands. The saturated hydraulic conductivities obtained from REPM are converted into average linear velocities using Darcy's Law and compared with the results from experimental tracer tests for homogeneous coarse, medium, and fine sand layer. Two types of tracer tests analyses, analytical solution using CXTFIT and moment methods, are performed to obtain reasonable linear velocity range for each layer. For the coarse and medium sands, the converted average linear velocity from REPM is in the velocity range obtained from tracer tests. However, small difference between the results from REPM and tracer tests is found for the fine sands. These results show that REPM gives reasonable estimates of saturated hydraulic conductivity.y.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.101-102
• /
• 2007

In order to characterize an electrical conductivity of ${\lambda}$-DNA by relative humidity, I-V characteristics through DNA on Au electrode with $1{\mu}m$ gap were measured as a function of the relative humidity. The electrical conductivity increased and the resistance decreased with an increase of humidity. The maximum effect of the humidity on the electrical property of DNA was obtained with the range from 43 to 82%. The hysteresis loop in I-V characteristics of DNA was disappeared above 92% of the humidity while the applying voltage was changed.

• 한국산림과학회지
• /
• 제87권2호
• /
• pp.220-229
• /
• 1998

이 연구(硏究)는 우리 나라 주요(主要) 낙엽(落葉) 활엽수(闊葉樹) 21종(種)에 대하여 분지부(分枝部)(branch junctions)의 상대수분통도성(相對水分通導性)(relative conductivity, RC), leaf specific conductivity(LSC), Huber value(HV), specific conductivity(SC) 등의 수분통도성(水分通道性)(hydraulic conductivity, HC), 그리고 변재부(邊材部)의 평균(平均) 도관직경(導管直經)(${\mu}m$)과 도관수(導管數)($No./mm^2$) 등을 측정(測定)하여 분지부(分枝部)의 수분통도(水分通道) 특성(特性)과 통도조직(通導組織) 특성(特性)을 종수별(樹種別)로 비교(比較)하였다. 분지부(分枝部)의 수분통도성(水分通道性)은 분기각(分技角)이 클수록 또한 분지(分技)된 가지의 직경(直經)이 작을수록 현저히 감소하였으며, 분지형(分技型)(ㅏ, Y, ${\Psi}$형(型))에 따른 분지부(分技部)의 수분통도성(水分通道性)은 Y형(型)보다는 ㅏ형(型)과 ${\Psi}$형(型)의 분지부(分技部)에서 더 작아졌다. 분지부(分技部)에 있어서 도관직경(導管直經)과 도관수(導管數)는 분지형(分技型)이나 분기각(分技角) 등의 분지형태(分技形態)에 따라 값의 차이가 있으나 인접한 줄기와 가지에 비하여 현저히 작았다.