• International Journal of Quality Innovation
• /
• v.10 no.1
• /
• pp.115-126
• /
• 2009

Video transmission effectiveness in the Ad Hoc network is becoming important recently, if different routing protocols are applied. Some researchers conclude that the reactive protocols are better for file transfer protocol (FTP) and constant bit rate (CBR) or hypertext transfer protocol (HTTP) transmission in an Ad Hoc wireless network but the performance report of video transmission is not much. This study adopts Qualnet (Network Simulator) as a simulation tool for environmental designing and performance testing, and employs an experimental design with eight groups. Our experiment shows that: (1) The performance of AODV (reactive) protocol is better than DSDV, ZRP and DSR when the transmission load has only one video stream; (2) Proactive (DSDV) and Hybrid protocols (ZRP) are better for a smaller Ad Hoc network when it transmits a video stream with some applications (VoIP, FTP and CBR). We conclude that packet loss rate is sensitive to the quality of video transmission and it has negative relationship with Peak Signal-to-Noise Ratio (PSNR) value. In addition, our experiment also shows that PSNR is a simple Metric for the performance evaluation of video transmission.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.3
• /
• pp.170-175
• /
• 2018

While the term online shopping refers to all online transactions, cross-border online shopping means shopping activities purchasing products or services over the internet for the customers abroad. As Internet use for the international shopping activity increasing, cross border online shopping has grown substantially for last decade. This study is about the problem regarding the cross border online shopping for two different countries and the variables that influence their shopping behavior. The cross border online shopping has been increased by the growth of Internet access. However, the growth of the Internet use does not guarantee a successful development of cross border e-commerce for every country. To find out the perception for cross-border online shopping for two different cultures, shoppers from two countries with different cultural background were chosen, and the perception for cross-border online shopping from each culture is contrasted. For statistical Analysis, ANOVA is used to find the relationship between a single non-metric independent variable, and multiple metric dependent variables. Hofstede's cultural dimensions model is adopted for this study as a tool to find out the patterns of cross border online shopping. This study showed what the variables would affect the perception in cross border online shopping. The results of this study indicated that cross border online shoppers with different culture were notably different on two variables identified-timeliness and ease of use.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.2
• /
• pp.110-116
• /
• 2023

In this study, samples of sea anchor canopy cloth mainly used in Korean jigging fishing vessels were collected and tested for performance evaluation. The canopy cloth of sea anchor is a basic element of form composition that is known to have the greatest influence on anchor performance. In order to evaluate the performance of sea anchor canopy cloth, five types of samples were tested for new metric count, tensile strength, water vapour transmission rate and drying speed according to the national standard (KS), and some correlations were identified. As a result of the test, the new metric count of cloths was 335.5-443.4 denier in warp and 217-447.6 denier in weft, and the minimum tensile strength was 860 N in warp direction and 430 N in weft direction. The apparent number and tensile strength of cloth were proportional, the water vapour transmission rate of the sample was 206.8 g/m²h, and the drying speed was 90-100 min. This study partially confirmed the performance evaluation based on speculation by the standard test method, and further research is needed on the clear relationship between the research results and the performance of the sea anchor.

• The Journal of Asian Finance, Economics and Business
• /
• v.6 no.3
• /
• pp.235-245
• /
• 2019

This research focuses on the relationships among customer satisfaction, delight, and loyalty. Although customer delight is one facet of an affective evaluation that can be predicted from customer satisfaction as cognitive component of the evaluation, there is no empirical examination on the casual relationship among customer satisfaction, delight, and loyalty. This study aims at addressing this gap in the service literature. The research questions are (1) How is customer satisfaction related to customer delight? and (2) Does customer delight matter in the relationship between customer satisfaction and loyalty? Data from a survey of consumers across upscale restaurant and retail bank in Korea were obtained. Our results show that customer satisfaction contributes positively to customer delight, and that customer delight plays a significant role in the relationship between customer satisfaction and loyalty. This chained relationship from customer satisfaction to customer delight to customer loyalty suggests that achieving customer delight represents one of the underlying pathways through which basic or core requirements expected by customers are satisfied. Our finding suggests that service firms need to monitor and manage their levels of customer delight as a performance metric, and delighting customers may be an important strategy to build competitive advantage through customer loyalty.

• Journal of KIISE:Software and Applications
• /
• v.26 no.9
• /
• pp.1095-1104
• /
• 1999

객체지향 시스템의 개발은 클래스를 통해서 이루어진다. 즉, 문제 영역에 존재하는 중요한 대상 또는 개념을 클래스로 모델링하고, 이로부터 생성된 객체들 사이의 메시지 교환을 통해서 시스템은 구축된다. 또한, 클래스는 정보 은닉을 제공함으로써, 객체지향 시스템의 재사용성과 유지보수성에 상당한 기여를 한다. 그러나, 설계 단계에서 실세계의 대상을 부적절하게 모델링하거나, 또는 유지보수 단계에서 클래스에 무분별한 변경을 가하는 경우 클래스의 품질은 악화될 수 있고, 이는 결국 시스템을 유지보수 하거나 확장하는데 상당한 장애를 초래한다.응집도는 모듈의 구성 요소들 사이의 연관성 정도를 나타내는 척도로서 전통적으로 모듈의 품질을 평가하기 위한 기준으로 사용되어 왔다. 이 논문에서는 클래스의 품질을 평가하는 방법으로서의 클래스 응집도를 제안한다. 즉, 클래스가 실세계의 대상을 적절하게 모델링한다면, 그 구성요소들 사이에 밀접한 관련이 있고 결국 높은 응집도를 가지게 될 것이다. 반대로 실세계의 대상에 대한 적절한 모델이 아니라면, 그 클래스의 구성 요소들 사이에는 밀접한 관련성이 없을 것이고 따라서 낮은 응집도를 보일 것이다.Abstract Object-oriented systems are developed by means of classes; that is, classes captures the essential entities or concepts in the problem domain, and the system is embodied by the interactions of objects instantiated from the classes. In addition to the basic units of object-oriented systems, classes serves as the units of encapsulation, which considerably promote the modifiability and the extensibility of them. However, improper modeling in the design phase or uncontrolled changes during the maintenance phase can degrade the quality of classes, which leads to systems cumbersome to maintain and extend.Cohesion refers to the degree of connectivity among the elements of a single module, and is being used as a factor which characterizes the quality of a module. In this paper, we propose a new cohesion metric for assessing the quality of classes. If a class captures properly the essential features of objects, the members of the class surely have strong relationship among them. On the contrary, the poor relationship among class members can indicate that the class is not a proper model of objects.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.914-919
• /
• 2009

The research investigates for the relationship between the operating performances of the make-ready process and project production performance. To this end, the researchers proposed a metric of PCR (Percentage of Constraint Removal) to measure the make-ready performance. The study measured the production performance in two ways: production planning reliability and progress performance. We hypothesized that how well the make-ready process is performed has an impact on the degree of production performance. The statistical analyses are used to investigate that how operating performance of the make-ready process affects project production performance. The results of the regression analysis support our hypotheses (p<0.25) and correlation coefficients for the relationship between project production performance and make-ready performance are also significant (p<0.05).

• The Research Journal of the Costume Culture
• /
• v.29 no.5
• /
• pp.634-650
• /
• 2021

This study was conducted to investigate the effect of relationship and service marketing on the brand interest and behaviors among Korean and Chinese active senior consumers and whether this effect differed between the two groups. A survey was conducted by having participants complete questionnaires administered by a research firm. For empirical analysis, frequency, EFA, CFA, SEM, the metric invariance test, and multiple-group comparison analysis were performed. The analysis results revealed that relationship marketing positively affected both brand interest and consumer behavior. Although service marketing positively affected brand interest, it did not have a significant effect on consumer behavior. In other words, brand interest positively affected consumer behavior through relationship and service marketing. Multiple-group comparison analysis demonstrated that no difference existed between Korean and Chinese active consumers in terms of how relationship marketing affected their brand interest, but a difference existed in how it affected their behavior. Service marketing had a greater influence on Chinese active senior consumers' brand interest than on Korean active senior consumers. However no difference existed between the two groups with respect to how service marketing affected their behaviors. Finally, brand interest had a positive effect only on Korean active senior consumers' behavior through relationship and service marketing, but not on Chinese active senior consumers. In conclusion, relationship and service marketing should be used to enhance the brand interest among Korean active senior consumers, and business activities should be planned by building relationships with Chinese active senior consumers to affect their behavior.

• Journal of Digital Contents Society
• /
• v.12 no.1
• /
• pp.69-75
• /
• 2011

A clustering process for nodes in a network is required to find communities from social networks. General clustering algorithm needs to be configured the number of communities in advance. The number of communities is a very important element because the result of clustering can be different, depending on it. In this paper, we define the external community relationship which is distinguished between communities. Using the external community relationship as an evaluation metric of clustering result, we propose a method to determine the number of communities dynamically. We compare the proposed method to existing methods based on the accuracy of the number of communities and the average purity of communities. Our results show favorable performance for these criteria compared to the existing methods that were evaluated.

• Journal of Broadcast Engineering
• /
• v.20 no.2
• /
• pp.204-214
• /
• 2015

Depth map upsampling is an approach to increase the spatial resolution of depth maps obtained from a depth camera. Depth map quality is closely related to 3D perception of stereoscopic image, multi-view image and holography. In general, the performance of upsampled depth map is evaluated by PSNR (Peak Signal to Noise Ratio). On the other hand, time-consuming 3D subjective tests requiring human subjects are carried out for examining the 3D perception as well as visual fatigue for 3D contents. Therefore, if an objective metric is closely correlated with a subjective test, the latter can be replaced by the objective metric. For this, this paper proposes a best metric by investigating the relationship between diverse objective metrics and 3D subjective tests. Diverse reference and no-reference metrics are adopted to evaluate the performance of upsampled depth maps. The subjective test is performed based on DSCQS test. From the utilization and analysis of three kinds of correlations, we validated that SSIM and Edge-PSNR can replace the subjective test.

• Journal of Korean Society for Quality Management
• /
• v.47 no.2
• /
• pp.271-281
• /
• 2019

Purpose: The purpose of this study is to suggest a more efficient distance measure taking into account the relationship between categorical variables for categorical data cluster analysis. Methods: In this study, the association-based dissimilarity was employed to calculate the distance between two categorical data observations and the distance obtained from the association-based dissimilarity was applied to the PAM cluster algorithms to verify its effectiveness. The strength of association between two different categorical variables can be calculated using a mixture of dissimilarities between the conditional probability distributions of other categorical variables, given these two categorical values. In particular, this method is suitable for datasets whose categorical variables are highly correlated. Results: The simulation results using several real life data showed that the proposed distance which considered relationships among the categorical variables generally yielded better clustering performance than the Hamming distance. In addition, as the number of correlated variables was increasing, the difference in the performance of the two clustering methods based on different distance measures became statistically more significant. Conclusion: This study revealed that the adoption of the relationship between categorical variables using our proposed method positively affected the results of cluster analysis.