• Journal of Society of Preventive Korean Medicine
• /
• v.13 no.2
• /
• pp.103-113
• /
• 2009

This study was performed to evaluate the effect of HCB on the bone mass and its related factors in estrogen-deficient animal model. The model rats of osteoporosis showed a significant decrease in bone density, bone ash density, calcium content of femur bone. At the 14th day after ovariectomy-surgery, rats were administered with HCB, extract of Houyttnia cordata, per orally, and continued for 10 weeks. And osteoporosis related parameters were determined to investigate the effect of HCB. Osteoporotic rats showed lower serum estrogen level, higher body weight than normal rats, and showed atrophy of uterine horns.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1038-1042
• /
• 2012

In this paper, a new distance measure for biased PDFs is proposed and a related equalizer algorithm is also derived for supervised adaptive equalization for multipath channels with impulsive and time-varying DC bias noise. From the simulation results in the non-Gaussian noise environments, the proposed algorithm has proven not only robust to impulsive noise but also to have the capability of cancelling time-varying DC bias noise effectively.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.4
• /
• pp.137-145
• /
• 2012

Sand is one of the essential materials used for social infrastructure construction such as embankment, landfill and backfill. It was known that mechanical properties and shear strength of sand are closely related to relative density. Therefore it is very important to determine accurate relative density. In this study, Portable Cone Penetration Tester (PCPT) was used to estimate the relative density and the internal friction angle of sand. PCPT cone-tip resistance ($q_c$) was measured changing the relative density of the two soil samples.Standard sand (JMJ) and Busan sand (BS). Also, a direct shear test was performed to investigate relationship between relative density and internal friction angle. The size and shape of soil particles were confirmed by using Scanning Electron Microscope (SEM). As a result, the log value of $q_c$ was linearly correlated with relative density and internal friction angle. In particular, the internal friction angle of BS sample was greater than that of JMJ, which was due to difference of the shape and mean size of particles. This result shows that it is important to determine the shape and size of particles as well as relative density to define mechanical property of sand. Through this study, it can be more effectively and conveniently to investigate relative density and shear strength of sand by using PCPT in situ.

• Journal of Ginseng Research
• /
• v.13 no.2
• /
• pp.147-152
• /
• 1989

The statistical characteristics of three year old American ginseng (Panax quinquefolium 1.) root yields from Lytton, British Columbia, Canada are presented. Ginseng root yield is related to plant density, with the highest yields generally obtained from the sites with the highest plant densities. However, these higher yields are made up of a larger proportion of smaller roots while the proportion of larger roots remains almost constant throughout the range of plant densities sampled. Further, it is suggested that relatively small samples can provide significant insight into crop performance and growth.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.600-603
• /
• 2000

DNA chip containing 207 E. coli genes related to important metabolisms such as (TCA cycle, glycolysis, fermentation and etc) were used to carry out a comprehensive investigation of the change in metabolism and physiology during high cell density culture of E. coli by fed-batch cultivation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.77-87
• /
• 2018

Traffic Density is the most important of the three primary macroscopic traffic stream parameters, because it is most directly related to traffic demand(Traffic Engineering, 2004). It is defined as the number of existing vehicles within a given distance at a certain time. However, due to weather, road conditions, and cost issues, collecting density directly on the field is difficult. This makes studies of density less actively than those of traffic volume or velocity. For these reasons, there is insufficient attempts on divers collecting methods or researches on the accuracy of measured values. In this paper, we used the 'Density Measuring System' based on the synthesise technology of several camera images as a method to measure density. The collected density value by the 'Density Mesuring System' is selected as the true value based on the density define, and this value was compared with the density calculated by the traditional measurement methods. As a result of the comparison, the density value using the fundamental equation method is the closest to the true value as RMSE shows 1.8 to 2.5. In addition, we investigated some issues that can be overlooked easily such as the collecting interval to be considered on collecting density directly by calculating the moment density and the average density. Despite the actual traffic situation of the experiment site is LOS B, it is difficult to judge the real traffic situation because the moment density values per second are observed max 16.0 (veh/km) to min 2.0 (veh/km). However, the average density measured for 15 minutes at 30-second intervals was 8.3-7.9 (veh/km) and it indicates precisely LOS B.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2005.09a
• /
• pp.67-88
• /
• 2005

Mold-Flow 3 Die Stack CSP of Mold array packaging with different Gate types. As high density package option such as 3 or 4 die stacking technologies are developed, the major concerning points of mold related qualities such as incomplete mold, exposed wires and wire sweeping issues are increased because of its narrow space between die top and mold surface and higher wiring density. Full 3D rheokinetic simulation of Mold flow for 3 die stacking structure case was done with the rheological parameters acquired from Slit-Die rheometer and DSC of commercial EMC. The center gate showed severe void but corner gate showed relatively better void performance. But in case of wire sweeping related, the center gate type showed less wire sweeping than corner gate types. From the simulation results, corner gate types showed increased velocity, shear stress and mold pressure near the gate and final filling zone. The experimental Case study and the Mold flow simulation showed good agreement on the mold void and wire sweeping related prediction. Full 3D simulation methodologies with proper rheokinetic material characterization by thermal and rheological instruments enable the prediction of micro-scale mold filling behavior in the multi die stacking and other complicated packaging structures for the future application.

• Journal of Korean Public Health Nursing
• /
• v.29 no.2
• /
• pp.177-189
• /
• 2015

Purpose: The purpose of this study was to investigate bone mineral density (BMD) and risk factors related to osteopenia in community people. Methods: The subjects consisted of 145 community people. The variables of osteoporosis knowledge and preventive health promoting behavior were measured using questionnaires. BMD and BMI (body mass index) were measured. Dietary nutrients intake related to osteoporosis was measured using 24hours recall. Data analysis was performed using the SPSS 18.0 program, using mean, standard deviation, ${\chi}^2-test$, t-test, and logistic regression. Results: Eighty six people (59.3%) had an osteopenia. According to normal group and osteopenia group, there was significant difference in gender (${\chi}^2=6.72$, p=.010) and smoking (${\chi}^2=5.18$, p=.023). Predictors of osteopenia group were male (OR=2.65, CI=1.03-8.98), BMI(OR=0.86, CI=0.72-0.96). Conclusion: Health care providers must consider factors that affect osteopenia such as gender, BMI. These results suggest the need to instruct nursing activities and interventions which are beneficial for prevention of osteoporosis.

• The Journal of the Korea Contents Association
• /
• v.5 no.2
• /
• pp.177-185
• /
• 2005

The purpose of this study was to evaluate the effect of combined exercise on body composition, health-related fitness and blood lipid. Subjects was ten middle-aged man. The combined exercise program consisted of performed for 60min in a bout, 4 times a week at the intensity of heart rate max$(50\sim75%)$ for 12 weeks. and the change of %fat, learn body mass, body mass index, back strength, sit-up, sit and reach total cholesterol, low density lipoprotein cholesterol, triglyceride and high density lipoprotein cholesterol have been measured before and post exercise 12 weeks. Paired t-test was performed for data analysis at the 0.05 level of significance.

• Biomedical Science Letters
• /
• v.18 no.3
• /
• pp.244-253
• /
• 2012

Bone mineral density (BMD) is used in the clinical diagnosis of osteoporosis and the assessment of fracture risk. Osteoporosis, characterized mainly by decreased BMD, is a highly heritable complex disorder and a major public health concern to hundreds of millions of elderly persons worldwide. However, the specific genetic variants determining risk for low bone density are still largely unknown. Here, we performed association analysis to elucidate the possible relations of genetic polymorphisms in ESR1 gene with low bone density. By examining genotype data of a total of 1813 women in the Korean Association REsource (KARE) study, we discovered the ESR1 gene polymorphisms are associated with decreased BMD and osteoporosis. The results on the BD-RT (bone density estimated by T-score at distal radius), three SNPs (rs2248586, rs9371557, and rs1569788) within the ESR1 gene were significantly associated with bone density. The results on the BD-TT (bone density estimated by T-score at midshaft tibia), five SNPs (rs9371552, rs2248586, rs712221, rs7772475, and rs3798577) were significantly associated with bone density. The SNP rs2248586 within the ESR1 gene had commonly significance in both BD-RT (${\beta}$=-0.151, dominant P=0.049) and BD-TT (${\beta}$=-0.156, dominant P=0.039). In the SNP rs2248586, their ${\beta}$-values in BD-RT and/or BD-TT showed consistent trends with the odds ratios (ORs) of osteoporosis. In summary, we found statistically significant SNPs in ESR1 gene that are associated with both decreased BMD and osteoporosis traits. Therefore, our findings suggest ESR1 gene could be related to pathogenesis of osteoporosis.