• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.308-311
• /
• 2004

Many researchers have reported that adding steel fiber to concrete improved its tensile and flexural strength significantly, but relatively few studies have been made on the compressive behavior of SFRC(steel fiber reinforced concrete). It is still less in case of high strength SFRC. The main objective of this research is to examine the effect of adding steel fiber on the compressive strength of high strength SFRC using fiber reinforcing index$(RI,\;V_f(l/d))$. It was found from the study that compressive strength was noticeably increased in proportion to RI.

• 한국해양공학회지
• /
• 제23권6호
• /
• pp.131-135
• /
• 2009

We present an optimum design method for a rectangular reinforced concrete beam using Genetic Algorithms. The optimum design procedure in this paper employs 2 design cases: i) all of the design variables (b, d, As) of the rectangular reinforced concrete section are used pseudo-continuously, ii) one is pseudo-continuous for the concrete cross section (b, d) and the other is discrete, using an index for the steel area (As). The optimum design in this paper uses Chakrabarty's model. In this paper, the Genetic Algorithms use the method of Elitism and penalty parameters to improve the fitness in the reproduction process, which leads to very practical designs. The optimum design of the steel area in the examples uses ASTM standard reinforcing bars (#3~#11, #14, #18).

• 한국건축시공학회지
• /
• 제12권3호
• /
• pp.332-339
• /
• 2012

In this study, six mortar mixes were tested in order to examine the significance and limitations of hydrophilic fiber in terms of its capacity to enhance the tensile resistance of Hwangtoh mortar. Lyocell, polyamide and polyvinyl alcohol (PVA) fibers were selected for the main test parameters. The tensile capacity of mortars tested was evaluated based on the splitting tensile strength and the modulus of fracture, while their ductility was examined using the toughness indices specified in ASTM. Test results showed that the addition of lyocell and PVA fibers had little influence on the flow of the Hwangtoh mortars. To enhance the tensile capacity and toughness index of Hwangtoh mortar, it is proposed that fiber spacing above 0.0003 is required, regardless of the type of fiber.

• 콘크리트학회논문집
• /
• 제28권3호
• /
• pp.279-288
• /
• 2016

이 연구에서는 철근콘크리트(reinforced concrete, RC) 기둥의 휨 거동을 비교적 간단한 방법으로 평가하기 위해서 모멘트-곡률 관계를 단순화하였다. RC 기둥에서 주철근 배근을 이상화하고 힘의 평형조건 및 변형률 적합조건에 기반하여 초기 휨 균열 발생, 인장철근 항복 도달, 최대 내력 및 최대 내력 도달 후 최대 내력의 80% 시점에서의 내력과 중립축 깊이를 산정하였다. 기둥의 최대 내력 이후의 콘크리트 압축연단 변형률은 Kim et al의 구속된 콘크리트 응력-변형률 관계를 이용하여 산정하였다. 단순화된 모멘트-곡률 관계로부터 환산된 기둥의 횡하중-횡변위 관계는 다양한 변수하에서 수행한 기둥 실험결과와 잘 일치하였다. 고려된 각 단계에서의 모멘트와 중립축 깊이는 주철근 지수, 횡보강근 체적지수 및 축력 지수의 함수로 모델링하였다. 결국, 기둥의 곡률 연성은 콘크리트 압축강도 및 주철근과 횡보강근의 양과 함께 작용 축하중비에 중요한 영향을 받았다.

• Structural Engineering and Mechanics
• /
• 제90권4호
• /
• pp.371-390
• /
• 2024

Investigating the impact of openings on the structural behavior of ferrocement I-beams with two distinct types of reinforcing metallic and non-metallic meshes is the primary goal of the current study. Up until failure, eight 250x200x2200 mm reinforced concrete I-beams were tested under flexural loadings. Depending on the kind of meshes used for reinforcement, the beams are split into two series. A control I-beam with no openings and three beams with one, two, and three openings, respectively, are found in each series. The two series are reinforced with three layers of welded steel meshes and two layers of tensar meshes, respectively, in order to maintain a constant reinforcement ratio. Structural parameters of investigated beams, including first crack, ultimate load, deflection, ductility index, energy absorption, strain characteristics, crack pattern, and failure mode were reported. The number of mesh layers, the volume fraction of reinforcement, and the kind of reinforcing materials are the primary factors that vary. This article presents the outcomes of a study that examined the experimental and numerical performance of ferrocement reinforced concrete I-beams with and without openings reinforced with welded steel mesh and tensar mesh separately. Utilizing ANSYS-16.0 software, nonlinear finite element analysis (NLFEA) was applied to illustrate how composite RC I-beams with openings behaved. In addition, a parametric study is conducted to explore the variables that can most significantly impact the mechanical behavior of the proposed model, such as the number of openings. The FE simulations produced an acceptable degree of experimental value estimation, as demonstrated by the obtained experimental and numerical results. It is also noteworthy to demonstrate that the strength gained by specimens without openings reinforced with tensar meshes was, on average, 22% less than that of specimens reinforced with welded steel meshes. For specimens with openings, this value is become on average 10%.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제26권2호
• /
• pp.81-88
• /
• 2013

Wet-spun silk fibers have attracted the attention of many researchers because of 1) the unique properties of silk as a biomaterial, including good biocompatibility and cyto-compatability and 2) the various methods available to control the structure and properties of the fiber. Cellulose nanofibrils (CNFs) have typically been used as a reinforcing material for natural and synthetic polymers. In this study, CNF-embedded silk fibroin (SF) nanocomposite fibers were prepared for the first time. The effects of CNF content on the rheology of the dope solution and the characteristics of wet-spun CNF/SF composite fibers were also examined. A 5% SF formic acid solution that contained no CNFs showed nearly Newtonian fluid behavior, with slight shear thinning. However, after the addition of 1% CNFs, the viscosity of the dope solution increased significantly, and apparent shear thinning was observed. The maximum draw ratio of the CNF/SF composite fibers decreased as the CNF content increased. Interestingly, the crystallinity index for the silk in the CNF/SF fibers was sequentially reduced as the CNF content was increased. This phenomenon may be due to the fact that the CNFs prevent ${\beta}$-sheet crystallization of the SF by elimination of formic acid from the dope solution during the coagulation process. The CNF/SF composite fibers displayed a relatively smooth surface with stripes, at low magnification (${\times}500$). However, a rugged nanoscale surface was observed at high magnification (${\times}10,000$), and the surface roughness increased with the CNF content.

• 한국지반환경공학회 논문집
• /
• 제14권4호
• /
• pp.29-37
• /
• 2013

본 논문에서는 정수슬러지와 폐어망을 재활용하기 위하여 정수슬러지의 다양한 혼합비율(0%, 10%, 30%, 50%)과 폐어망 보강형식(무보강, 무처리된 폐어망, 본딩처리된 폐어망)에 따른 혼합토의 공학적 특성을 조사하였다. 무처리된 폐어망과 본딩처리된 폐어망을 혼합토에 보강하여 흙 입자와 폐어망 표면 사이의 억물림을 증가시키고자 하였다. 다짐시험, 삼축압축시험, 압밀시험, 투수시험과 용출시험과 같은 다양한 실내시험이 수행되었다. 시험 결과 정수슬러지의 혼합비율이 증가할수록 최대건조단위중량, 점착력, 내부마찰각 및 투수계수가 감소하였으나 최적함수비, 압축지수, 팽창지수 및 압축비는 증가하였다. 또한 폐어망 및 본딩처리된 폐어망이 보강됨에 따라 점착력 및 내부마찰각이 증진되었다. 용출시험 결과 환경부가 고시한 기준을 모두 만족하는 것으로 나타났다.

• Steel and Composite Structures
• /
• 제38권5호
• /
• pp.477-496
• /
• 2021

The main objective of this paper is to study vibration of sandwich open cylindrical panel with damaged core and FG face sheets based on three-dimensional theory of elasticity. The structures are made of a damaged isotropic core and two external face sheets. These skins are strengthened at the nanoscale level by randomly oriented Carbon nanotubes (CNTs) and are reinforced at the microscale stage by oriented straight fibers. These reinforcing phases are included in a polymer matrix and a three-phase approach based on the Eshelby-Mori-Tanaka scheme and on the Halpin-Tsai approach, which is developed to compute the overall mechanical properties of the composite material. Three complicated equations of motion for the panel under consideration are semi-analytically solved by using 2-D differential quadrature method. Several parametric analyses are carried out to investigate the mechanical behavior of these multi-layered structures depending on the damage features, through-the-thickness distribution and boundary conditions. It is seen that for the large amount of power-law index "P", increasing this parameter does not have significant effect on the non-dimensional natural frequency parameters of the FG sandwich curved panel. Results indicate that by increasing the value of isotropic damage parameter "D" up to the unity (fully damaged core) the frequency would tend to become zero. One can dictate the fiber variation profile through the radial direction of the sandwich panel via the amount of "P", "b" and "c" parameters. It should be noticed that with increase of volume fraction of fibers, the frequency parameter of the panels does not increase necessarily, so by considering suitable amounts of power-law index "P" and the parameters "b" and "c", one can get dynamic characteristics similar or better than the isotropic limit case for laminated FG curved panels.

• 한국과학교육학회지
• /
• 제17권4호
• /
• pp.347-358
• /
• 1997

Locus of Control of Reinforcement (LOCR)' is considered as one of the most important factors on responsible environmental behaviors(REB). It is defined as 'an individual's perception of his or her ability to bring about change through his or her behavior'. This psychological construct is divided up into two directions: the external locus and internal locus. The internal locus is important as a predictor of REB. Recently, 'The Environmental Action Internal Control Index: EAICI' has been developed and it is a valid and reliable instrument to measure the relationship of two variables. The purposes of this study were to develop a strategy to reinforce the internal locus or to converse external locus to internal locus. and to verify the effects by EAICI. A new strategy, 'Self Control Management Strategy' was based on the characteristics of internal locus and the key idea of this was to self-control and to manage the courses by themselves. EAICI scores of the control group was 99.83. All of them were internal and the LOCR of females was more internal than that of the males. This strategy was applied when the instructions were carried out on seven environmental issues by the experimental group. According to the results. the seven points of the EAICI were increased significantly. Therefore this strategy is helpful in reinforcing the internal locus or to converse external locus to the internal locus.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.425-431
• /
• 2001

In order to take account of the statistical properties of probability variables used in the structural analysis, the conventional approach using the safety factor based on past experience usually estimated the safety of a structure. The real structures could only be analyzed with the error in estimation of loads, material characters and the dimensions of the members. But the errors should be considered systematically in the structural analysis. Structural safety could not precisely be appraised by the traditional structural design concept. Recently, new approach based on the probability concept has been applied to the assessment of structural safety using the reliability concept. In this study, safety of structures will estimated by the reliability analysis with commercial structural software that has the tools of nonlinear elastic-plastic 3-D analysis. Experimental test result is compared to results from this research and Coan/sup 1)/ In this paper, AFOSM(Advanced First-Order Second Moment method) is applied with von Mises, Tresca and Mohr-Coulomb failure criterions. The reliability index β and probability of failure P/sub f/ can be obtained by following this practical procedure as judgement a safety of structures and necessity of reinforcing.