• 멤브레인
• /
• 제32권6호
• /
• pp.427-441
• /
• 2022

고분자 전해질 막 연료전지(polymer electrolyte membrane fuel cell, PEMFC)의 핵심 구성요소 중 하나인 고분자 전해질 막(polymer electrolyte membrane, PEM)은 수소이온을 애노드(anode)에서 캐소드(cathode)로 이동시키는 전해질의 역할 및 연료의 투과를 막는 분리막으로서의 역할을 수행하며 PEMFC의 성능 및 효율을 결정짓는 핵심 소재이다. 현재 나피온 (Nafion^®)으로 대표되는 과불소화계 전해질 막이 높은 수소이온 전도도 및 화학적 안정성으로 인해 상용화 되었지만, 높은 생산비용과 구동 시 환경오염 물질이 배출된다는 문제점을 갖고 있다. 이를 대체할 PEM 소재로써 고분자의 구조 조절 및 개질 과정이 용이한 다양한 종류의 탄화수소계 고분자가 제시되고 있지만, 실제 PEMFC에 적용되기 위해서는 성능 및 내구 특성을 개선해야 하는 과제가 남아있다. 이에 본 총설은 탄화수소계 PEM의 성능 및 내구 특성을 향상시키기 위해 1) 가교 구조를 도입한 가교 막 개발, 2) 무기 첨가제 도입을 통한 유⋅무기 복합 막 개발 및 3) 다공성 지지체를 활용한 강화 복합막을 개발하는 연구에 대해 살펴보고자 한다.

• 한국해양공학회지
• /
• 제27권1호
• /
• pp.74-79
• /
• 2013

In the context of the structural performance of an LNG hold, the mechanical characteristics of the insulation material are considered to be a critical design factor under cryogenic temperatures. This paper presents the thermal elasto-plastic behavior of the reinforced polyurethane foam (RPUF) adapted for the insulation material of a membrane-type LNG carrier via both experiments and numerical simulations realizing the cryogenic condition. The experiments are carried out to investigate the thermal transfer and thermal elasto-plastic deformation characteristics of an actual RPUF specimen. The heat transfer simulations based on the finite element method (FEM) include a forced convection analysis. The results of heat transfer analyses are compared with the experimental results. Reasonable cryogenic conditions for RPUF are reviewed based on both the analysis and experimental results.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.17-20
• /
• 2006

It often happen water leakage that roof membrane have a poor condition such as direct exposed to rain, ultraviolet lays, temperature change compare with other part of waterproofing. There are difficult to maintain the quality of waterproofing and durability due to use only few waterproofing materials in practical in spite of development and use the various waterproofing material as solution of these poor condition. Therefore, in this thesis, I would like to know the property to apply field and suggest other method to develop for this waterproofing method to adopt various field condition for roof tops, as searching exposed and complex waterproofing technology for roof tops which is reinforced sheet using rising system have a regular pitch, depth, space.

• Structural Engineering and Mechanics
• /
• 제53권1호
• /
• pp.173-188
• /
• 2015

Several structural calamities in the second half of the 20th century have shown that adequate collapse-resistance cannot be achieved by designing the individual elements of a structure without taking their interconnectivity into consideration. It has long been acknowledged that membrane behaviour of reinforced concrete structures can significantly increase the robustness of a structure and delay a complete collapse. An experimental large-scale test was conducted on a horizontally restrained, continuous reinforced concrete slab exposed to an artificial failure of the central support and subsequent loading until collapse of the specimen. Within this investigation the development of catenary action associated with the formation of large displacements was observed to increase the ultimate load capacity of the specimen significantly. The development of displacements, strains and horizontal forces within this investigation confirmed a load transfer process from an elastic bending mechanism to a tension controlled catenary mechanism. In this contribution a special focus is directed towards strain and crack development at critical sections. The results of this contribution are of particular importance when validating numerical models related to the development of catenary action in concrete slabs.

• Advances in environmental research
• /
• 제3권4호
• /
• pp.367-377
• /
• 2014

In this study, we investigated a life cycle assessment (LCA) of six roof-waterproofing systems [asphalt (C1), synthetic polymer-based sheet (C2), improved asphalt (C3), liquid applied membrane (C4), Metal sheet with asphalt sheet (N1), and liquid applied membrane with asphalt sheet (N2)]for reinforced concrete building using an architectural model. To acquire accurate and realistic LCA results, minimum units of material compositions for life cycle inventory and real data for compositions of waterproofing materials were used. Considering only materials and energy demands for waterproofing systems per square meter, higher greenhouse gas (GHG) emissions could be generated in the order of C1 > N2 > C4 > N1 > C2 > C3 during construction phase. However, the order was changed to C1 > C4 > C3 > N2 > N1 > C2, when the actual architecture model was applied to the roof based on each specifications. When an entire life cycle including construction, maintenance, and deconstruction were considered, the amount of GHG emission was in the order of C4 > C1 > C3 > N2 > C2 > N1. Consequently, N1 was the most environmental-friendly waterproofing system producing the lowest GHG emission. GHG emissions from maintenance phase accounted for 71.4%~78.3% among whole life cycle.

• 한국건축시공학회지
• /
• 제6권4호
• /
• pp.69-75
• /
• 2006

It often happen water leakage that roof membrane have a poor condition such as direct exposed to rain, ultraviolet lays, temperature change compare with other part of waterproofing. There are difficult to maintain the quality of waterproofing and durability due to use only few waterproofing materials in practical in spite of development and use the various waterproofing material as solution of these poor condition. Therefore, in this thesis, I would like to know the property to apply field and suggest other method to develop for this waterproofing method to adopt various field condition for roof tops, as searching exposed and complex waterproofing technology for roof tops which is reinforced sheet using rising system have a regular pitch, depth, space.

• 한국의류학회지
• /
• 제17권1호
• /
• pp.37-47
• /
• 1993

최근에 치명적인 바이러스, 특히 에이즈를 이르키는 Human Immunodificiency Virus (HIV), 또는 간에 심각한 병을 이르키는 Hepatitis B Virus (HBV)와 같은 무서운 바이러스가 환자의 피나 분비물을 통하여 의사에게 전염되는 사례가 늘어감에 따라 이제는 환자의 피나 분비물의 침투를 막기 위해 방수성과 방균성을 가진 수술복 착용이 절대적으로 필요하게 되었다. 따라서 본 연구의 목적은 1. 수술가운을 만드는 5가지 대표적인 직물의 방수성과 방균성을 측정하고 2. 세탁시 표백제의 사용유무가 그 직물의 방수성과 방균성에 미치는 영향을 알아보고 3. 반복세탁이 그 직물의 방수성과 방균성에 미치는 영향을 알아 보는데 있다. 이 실험을 위해 3가지 재사용 수술가운과 (Gore-tex$^R$, membrane reinforced; Compel$^{TM}$, fabric reinforced; Acep$^{TM}$, non-reinforced) 두 가지 일회용 가운 (Evolution$^R$ gown, fabric reinforced; Evolution$^R$ Specialty, film reinforced)이 사용되었다. 표백제를 사용한 세탁이 직물의 방수성과 방균성에 미치는 영향을 알아보기 위해 재사용 가운을 세탁, 건조, 살균을 하였다. 세탁과 살균의 빈도수는 1, 20, 40, 50, 60, 70, 80번 이였다. 방수성 측정방법으로 1. Impact Penetration test (AATCC 42-1985), 2. Elbow Lean test, 3. Synthetic Blood Resistance test (ASTM F 23. 40. 01)가 사용되었고 방균성 측정방법으로 Viral Resistance test (ASTM F 23. 40. 02)가 사용되었다. 실험 결과는 다음과 같다. 1. Gore-Tex$^R$ 가운과 Evolution$^R$ Specialty 가운은 방수성과 방균성의 성질을 가졌다. 그러나 표백제를 사용하여 70번 세탁한 Gore-Tex$^R$ 가운은 membrane의 구조가 파괴되어서 방균성을 상실했다. 2. Evolution$^R$ 가운, Acep$^{TM}$ 가운과 Compel$^{TM}$ 가운은 오직 Impact Penetration test만 통과했다. 즉 이 직물들은 큰 압력의 가함이 없는 splash resistance만 가지고있다. 그러나 Acep$^{TM}$ 가운과 Compel$^{TM}$ 가운은 20번과 60번 세탁 후 각각 그들의 splash resistance 마져도 상실했다.

• 대한치주과학회:학술대회논문집
• /
• 대한치주과학회 2004년도 제44회 종합학술대회 연제초록
• /
• pp.71-71
• /
• 2004

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2003년도 추계 학술발표회 논문집
• /
• pp.57-60
• /
• 2003

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2003년도 연료전지심포지움 2003논문집
• /
• pp.57-61
• /
• 2003