• 한국치위생학회지
• /
• 제14권6호
• /
• pp.887-894
• /
• 2014

Objectives: The purpose of this study was to investigate the oral health education and oral health care in the implant wearers. Methods: A self-administered questionnaire was conducted by 253 patients in 14 different dental hospitals and clinics in Seoul and Gyeonggi-do from July 1 to September 30, 2012. The instrument was adapted from Kang and Lee, Yu and Shim, and Ko and Jang on the basis of the previous study. The questionnaire consisted of 12 questions including general characteristics of the subjects(4 questions), oral health education(3 questions), behavior and attitude of tooth brushing(3 questions), and use of auxiliary supplies(2 questions). Results: 1. 38.3% of the patients received the dental care education for the first time. The most common education method was demonstration by dental hygienists(28.9%). 26.2% of the patients wanted to know the right toothbrushing method. 2. The best toothbrushing methods were rolling method(28.9%) and Leonard's method(28.9%). 19.4% of the patients changed the toothbrushing method after education. 22.5 percent brushed their natural teeth and implant teeth by a different maneuver. 3. The interdental brush was the most commonly used product(35.8%) and most of the patients the interdental brush once a day(36.6%). 4. There was a significant difference between the frequency of toothbrushing and method(p<0.05). 5. There was a significant difference between the separate brushing of implant and natural teeth by the frequency of toothbrushing and method of education(p<0.05). 6. Use of interdental brush had an influenced on education method(p<0.05). Conclusions: Regular dental checkup and use of interdental brush can improve the oral care for the implant wearers. Regular use of interdental brush can prolong the life span of implant tooth and keep the patients' teeth in good condition.

• 대한심미치과학회지
• /
• 제25권1호
• /
• pp.25-34
• /
• 2016

상실한 하악 4전치에서의 치료 계획은 어느 다른 부위보다 수술의 성공률이나 보철치료시 유리한 환경을 지니고 있다고 흔히 생각되는 부위이다. 하지만 하악 전치들의 M-D 사이즈나 crowding으로 인한 공간적 제한, 임시치아 문제, 치조골 흡수로 인해 생기는 심미적인 문제 등 의외로 까다로운 경우가 종종 발생하는 부위기도 한다. 본문에서는 하악 4전치 상실 시의 치료 계확에 대해서 케이스를 통해 알아 보겠다. 하악 4전치 상실시 가능한 옵션들: 하나 혹은 4전치중 일부 상실의 경우나 잔존 치조골의 흡수가 거의 없어 임플란트 위치 관계가 심미적으로 중요하다고 판단되는 경우라면 직경이 작은 임플란트들을 원래 발치와 중앙에 식립(Narrow type 이나 One body mini implant type) 최종 보철물 형태가 Pink porcelain을 포함하는 이미 광범위한 치조골의 흡수가 일어난 경우 즉 임플란트 식립 위치가 덜 중요한 상황이라면 regular size의 임플란트들을 측절치와 중절치의 사이 Interseptal bone위치에 식립 4전치중 하나 혹은 일부가 상실됐고 남아 있는 전치들의 예후가 불량하다고 의심되나 환자가 당장 나머지 전치들의 발치에는 동의하지 않을 때 남아 있는 전치들이 발치 될 때까지의 Tentative restoration로서 Resin Bonded Bridge(Resin Retained Bridge/Resin Bonded Fixed Partial Denture)의 적용.

• 대한치과의사협회지
• /
• 제53권9호
• /
• pp.644-655
• /
• 2015

Purpose: This study was conducted to evaluate the effect of the fixture abutment connection type and diameter on the screw joint stability in external butt joint for 2nd surgery and internal cone connected type implant system for 1st and 2nd surgery using ultimate fracture strength. Materials and Methods: USII system, SSII system and GSII system of Osstem Implant were used. Each system used the fixture with two different diameters and cement-retained abutments, and tungsten carbide / carbon coated abutment screws were used. Disc shaped stainless steel metal tube was attached using resin-based temporary cement. The experimental group was divided into seven subgroups, including the platform switching shaped specimen that uses a regular abutment in the fixture with a wide diameter in USII system. A static load was increased to the metal tube at 5mm deviated point from the implant central axis until it reached the compression bending strength at a rate of 1mm/min. Then the deformations and patterns of fracture in threaded connection were compared. Results and Conclusion: 1. In the comparison between the Regular diameter, compression bending strength of SSII system was higher than USII system and GSII system. There was no significant difference between USII system and GSII system. 2. In the comparison between wide diameter, compression bending strength was increased in the order of GSII system, USII system, and SSII system. 3. In comparison between the implant diameter, compression bending strength of the wide diameter was greater than the regular diameter in any system(P<0.05). 4. There was no significant difference between the platform switching (III group) and the regular diameter (I group) in USII system. 5. In USII system, fracture of abutment screw and deformation of both fixture and abutment were observed in I, II and III subgroups. 6. Failure pattern of SSII system, which was the fracture of abutment screw and deformation of the abutment and fixture, was observed in both IV and V subgroups. Fracture of some fixtures was observed in subgroup V. 7. Failure pattern of GSII system, which was the fracture of the abutment screw and deformation of the fixture and the abutment, was observed in both VI and VII subgroups. Apart from other subgroups, subgroup VII demonstrated no bending neither the fracture at the top of the fixture. The compressive deformation of internal slope in the fixture was the only thing observed in subgroup VII.

• 한국콘텐츠학회논문지
• /
• 제11권11호
• /
• pp.264-273
• /
• 2011

본 연구는 노년인구의 증가에 따른 치아상실로 매년 증가하고 있는 임플란트 치료에 있어 대상 환자가 치료를 결정하는데 영향을 미치는 요인을 분석하여 긍정적인 인식 전환과 임상적 기준 마련에 관한 기초자료를 제공하는데 있다. 2010년 7월부터 약 3개월간 서울시와 경기도 소재의 13개 치과 의료기관의 환자 217명을 대상으로 임플란트 치료군과 비치료군으로 구분하여 설문조사를 시행하였다. 임플란트 치료군은 50대(30.3%)가, 비치료군은 20대(35.7%)가 가장 높았고, 치료군 환자의 구강관리가 양호하였으며, 긍정적인 태도를 보였다. 다중로지스틱 회귀분석으로 분석한 결과, 임플란트 치료결정에 영향을 미치는 요인은 연령, 성별, 교육기간, 월 소득, 치주조직상태, 정기검진여부, 상담태도, 병원신뢰도 등으로 나타났다. 따라서 예방적 차원의 정기적인 구강검진과 관리의 필요성에 대한 교육 및 홍보가 필요하며, 임플란트 치료결정에 긍정적인 인식을 가질 수 있도록 의료진의 상담 기술을 키우고 병원의 신뢰도 향상을 위한 다각도의 노력이 필요하다. 아울러 임플란트 치료 결정에 환자의 막연한 주관적 판단보다는 결정을 용이하게 할 수 있는 명확한 임상적 기준 마련이 필요하며, 비용 부담없이 임플란트 치료를 받을 수 있도록 정부 차원의 재정적 지원이나 정책적인 대안이 요구된다.

• 대한치과보철학회지
• /
• 제44권3호
• /
• pp.295-313
• /
• 2006

Statement of problem. Higher fracture rates were reported for Branemark implants placed in the maxilla and for 3.75 mm diameter implants installed in the posterior region. Purpose. The purpose of this study was to investigate the fracture of a fixture by finite element analysis and to compare different diameter of fixtures according to the level of alveolar bone resorption. Material and Methods. The single implant and prosthesis was modeled in accordance with the geometric designs for the 3i implant systems. Models were processed by the software programs HyperMesh and ANSA. Three-dimensional finite element models were developed for; (1) a regular titanium implant 3.75 mm in diameter and 13 mm in length (2) a regular titanium implant 4.0 mm in diameter and 13 mm in length (3) a wide titanium implant 5.0 mm in diameter and 13 mm in length each with a cementation type abutment and titanium alloy screw. The abutment screws were subjected to a tightening torque of 30 Ncm. The amount of preload was hypothesized as 650 N, and round and flat type prostheses were 12 mm in diameter, 9 mm in height were loaded to 600 N. Four loading offset points (0, 2, 4, and 6 mm from the center of the implants) were evaluated. To evaluate fixture fracture by alveolar bone resorption, we investigated the stress distribution of the fixtures according to different alveola. bone loss levels (0, 1.5, 3.5, and 5.0 mm of alveolar bone loss). Using these 12 models (four degrees of bone loss and three implant diameters), the effects of load-ing offset, the effect of alveolar bone resorption and the size of fixtures were evaluated. The PAM-CRASH 2G simulation software was used for analysis of stress. The PAM-VIEW and HyperView programs were used for post processing. Results. The results from our experiment are as follows: 1. Preload maintains implant-abutment joint stability within a limited offset point against occlusal force. 2. Von Mises stress of the implant, abutment screw, abutment, and bone was decreased with in-creasing of the implant diameter. 3. With severe advancing of alveolar bone resorption, fracture of the 3.75 and the 4.0 mm diameter implant was possible. 4. With increasing of bending stress by loading offset, fracture of the abutment screw was possible.

• 대한치과의사협회지
• /
• 제52권7호
• /
• pp.396-401
• /
• 2014

Peri-implantitis is an inflammatory disease of the peri-implant tissue by bacterial infection or other factors, which results in peri-implant bone loss. Many nonsurgical treatments were tried on initial to moderate peri-implantitis lesion to reduce the inflammation. Some of these treatments made effective results, however, they were not definitively predictable. To prevent peri-implantitis and further peri-implant bone loss, early intervention is the most important. Early detection of peri-implant infection through the regular maintenance care can make it possible to do early nonsurgical intervention. Nonsurgical intervention is effective on peri-implant mucositis and can also be effective on initial peri-implantitis lesion. If the peri-implantitis is not resolves by nonsurgical treatment, surgical approach should be considered.

• 대한치과의사협회지
• /
• 제54권9호
• /
• pp.692-702
• /
• 2016

A short dental implant is considered as possible solution in difficult clinical situations for the placement of a regular length implant. Using a short implant avoiding more invasive surgical procedures simplifies the treatment plan and shortenes the duration of treatment. In this case, 71-year-old female came up with discomfort from her old mandibular denture. As she had fully edentulous mandible and got a negative feedback from removable denture, implant-supported fixed prosthesis was planned. Six short implants were placed on her mandible with severe alveolar bone loss. After 1 year follow up period, implants were well retained with any other abnormal findings. The patient was satisfied with her prostheses and satisfactory outcomes were attained in terms of both esthetic and functional clinical results.

• 한국치위생학회지
• /
• 제12권4호
• /
• pp.759-770
• /
• 2012

Objectives : The purpose of this study was to examine the awareness of implant wearers about periodontal diseases and implant management, which were closely linked to implant durability, in an effort to obtain information on the right directions for oral health education related to implant self-care and specialized care. Methods : The subjects in this study were 217 patients who wore implant and visited 14 different dental hospitals and clinics in the metropolitan area. After a questioaire survey was conducted and collected data were analyed by the statistical package SPSS 18.0. Results : As for the awareness of the subjects on the regeneration of alveolar ridge by general characteristics, there were statistically significant intergroup gaps according to the number of possessed implant, implant satisfaction and subjective gingival health status(p<0.05). Regarding their awareness of implant durability by general characteristics, there were statistically significant gaps according to the number of possessed implant and oral health education experience(p<0.05). Concerning their awareness of the cycle of regular implant checkup by general characteristics, there were statistically significant gaps according to occupation, subjective gingival health status and oral health education experience(p<0.05). Conclusions : The above-mentioned findings suggest that in order to ensure the long-term safe maintenance of implant, the way of looking at periodontal diseases and implant management should be changed. Specifically, more intensive oral health education should be provided for implant wearers to be aware of the importance of self-care and specialized care to change their oral health behavior, and clinical dental hygienists should improve their role performance to make it happen.

• Journal of Periodontal and Implant Science
• /
• 제35권3호
• /
• pp.789-798
• /
• 2005

Primary stability is a fundamental criteria of implant success. There has been various trials to increase initial stability and bone to implant contact. The objective of osteotome technique is to preserve all the existing bone by minimizing or even eliminating the drilling sequence of the surgical protocol. The bone layer adjacent to the osteotomy site is progressively compacted with various bone condensers(osteotomes) this will result in a denser bone to implant contact. This improved bone density helps to optimize primary implant stability in low density bone. The use of wide implant is one of methods to increse primary stability. They can be used in special situations in which they can increase the surface area available for implant anchorage and improve their primary stability The aim of this study was to evaluate the influence of the osteotome technique and implant width on primary stability. Osteotome technique was compared with conventional drilling method by resonance frequency measurments according to the implant fixtures diameter. The results were as follows: 1. The average of ISQ value was sightly higher in osteotome technique, but there was not statistically significant in regular and narrow implant(p <0.05). 2. Either osteotome technique or conventional technique. ISQ value was significantly higer as increasing of implant diameter(p <0.05). 3. ISQ value of drilling technique was higer than those of osteotome technique in wide implant. It was assumed to be caused by difference in final preparation diameter.

• The Journal of Advanced Prosthodontics
• /
• 제8권4호
• /
• pp.304-312
• /
• 2016

PURPOSE. The aim of this study was to investigate the stress distribution of 2-short implants (2SIs) installed in a severely atrophic maxillary molar site. MATERIALS AND METHODS. Three different diameters of internal connection implants were modeled: narrow platform (NP), regular platform (RP), and wide platform (WP). The maxillary first molars were restored with one implant or two short implants. Three 2SI models (NP-oblique, NP-vertical, and NP-horizontal) and four single implant models (RP and WP in a centered or cantilevered position) were used. Axial and oblique loadings were applied on the occlusal surface of the crown. The von Mises stress values were measured at the bone-implant, peri-implant bone, and implant/abutment complex. RESULTS. The highest stress distribution at the bone-implant interface and the peri-implant bone was noticed in the RP group, and the lowest stress distribution was observed in the 2SI groups. Cantilevered position showed unfavorable stress distribution with axial loading. 2SI types did not affect the stress distribution in oblique loading. The number and installation positions of the implant, rather than the bone level, influenced the stress distribution of 2SIs. The implant/abutment complex of WP presented the highest stress concentration while that of 2SIs showed the lowest stress concentration. CONCLUSION. 2SIs may be useful for achieving stable stress distribution on the surrounding bone and implant-abutment complex in the atrophic posterior maxilla.