• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.5
• /
• pp.552-560
• /
• 2013

In this paper, an optimization algorithm for the block assembly accuracy control assessment is proposed with consideration for the current block assembly process and accuracy control procedure used in the shipbuilding site. The objective function of the proposed algorithm consists of root mean square error of the distances between design and measured data of the other control points with respect to a specific point of the whole control points. The control points are divided into two groups: points on the control line and the other points. The grouped data are used as criteria for determining the combination of 6 degrees of freedom in the registration process when constituting constraints and calculating objective function. The optimization algorithm is developed by using combination of the sampling method and the point to point relation based modified ICP algorithm which has an allowable error check procedure that makes sure that error between design and measured point is under allowable error. According to the results from the application of the proposed algorithm with the design and measured data of two blocks data which are verified and validated by an expert in the shipbuilding site, it implies that the choice of whole control points as target points for the accuracy calculation shows better results than that of the control points on the control line as target points for the accuracy of the calculation and the best optimized result can be acquired from the accuracy calculation with a fixed point on the control line as the reference point of the registration.

• Journal of Korean Society of Archives and Records Management
• /
• v.1 no.2
• /
• pp.101-119
• /
• 2001

In this paper we explain the definition and component of electronic records, and reestablish the principle of the preservation. Also we discuss the conceptual approaches and requirements for long-term preservation in an electronic environment. The preservation in digital environment is to protect itself of record identity with the reliability and authenticity, and to ensure the accessibility of records. It needs to be periodical migration along with digital environment change for the long-term preservation of the electronic records. and to select software independent standard format. to ensure the integrity of electronic records along with this preservation strategy, process and relative information required for digital preservation are to record in the form of metadata. The preservation system is separated into four functional entities ; registration process, preservation process, access process, main record management system. Also, this article is conceptually to introduce the selection criteria of storage media, the security provision for the archive collections and the disaster recovery which apply to the digital archives.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.3.2-3.2
• /
• 2011

In recent years, inkjet printing technology has received significant attention as a micro/nanofabrication technique for flexible printing of electronic circuits and solar cells, as well for biomaterial patterning. It eliminates the need for physical masks, causes fewer environment problems, lowers fabrication costs, and offers good layer-to-layer registration. To fulfill the requirements for use in the above applications, however, the inkjet system must meet certain criteria such as high frequency jetting, uniform droplet size, high density nozzle array, etc. Existing inkjet devices are either based on thermal bubbles or piezoelectric pumping; they have several drawbacks for flexible printing. For instance, thermal bubble jetting has limitations in terms of size and density of the nozzle array as well as the ejection frequency. Piezoelectric based devices suffer from poor pumping energy in addition to inadequate ejection frequency. Recently, an electrohydrodynamic (EHD) printing technique has been suggested and proposed as an alternative to thermal bubble or piezoelectric devices. In EHD jetting, a liquid (ink) is pumped through a nozzle and a strong electric field is applied between the nozzle and an extractor plate, which induce charges at the surfaces of the liquid meniscus. This electric field creates an electric stress that stretches the meniscus in the direction of the electric field. Once the electric field force is larger than the surface tension force, a liquid droplet is formed. An EHD inkjet head can produce droplets smaller than the size of the nozzle that produce them. Furthermore, the EHD nano-inkjet can eject high viscosity liquid through the nozzle forming tiny structures. These unique features distinguish EHD printing from conventional methods for sub-micron resolution printing. In this presentation, I will introduce the recent research results regarding the EHD nano-inkjet and the printing system, which has been applied to solar cell or thin film transistor applications.

• Journal of Oriental Neuropsychiatry
• /
• v.9 no.1
• /
• pp.25-43
• /
• 1998

45 Dementia of Alzheimer type patients who were treated by the KOMC NP from Jan. 1996 to July. 1997 were recruited for this study in order to prove the effects of the oriental medical treatment on Dementia of Alzheimer type. Patients were strictly classified into Sasang constitutions, and then were given herbal and acupunctural treatment for various length of time. The efficiency of the treatment was assessed by criteria for memory, orientation, registration, attention and calculation, language. The following results were obtained. 1. Out of 45 cases, 14 improved to almost normal state, 13 improved a little, 16 had no change, and 2 became worse. On the whole, 60% of the patients showed improvement. 2. Out of 31 female patients, 17 patients improved, thus the rate of improvement was at 55%. Out of 14 male patients, 10 patients improved, thus the rate of improvement was at 71%. 3. The analysis of the patients constitution resulted in two Soyang-constitution, 23 Soum and 20 Taeum, Soum, Teaum responded to the treatment to an approximately equal extent. 4. Of the demendia patients involved in the study, 9 cases were mild, 14 moderate, and 22 severe, 9 mild cases, 12 moderate cases and 6 severe cases showed meaningful response to the treatment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.217-228
• /
• 2011

In centralize CDN systems, the content server selection is performed by service node for every user request, and the selected node is notified to the user. In this paper, we present distributed CDN architecture and algorithm in which the request from a user is delivered to the content source by a P2P algorithm utilizing DHT(distributed hash table) through the overlay network and the user selects one of the source nodes based on real-time user-centric criteria. For this purpose, we propose a modified Pastry algorithm for contents registration, search and selection, in addition to the distributed architecture. The proposed architecture has the advantages of load balancing, traffic balancing, scalability, fault-tolerance due to the self-configuration, self-healing attributes of distributed architecture. Various simulation shows the feasibility of the proposed architecture and algorithm, and the performance is compared and discussed for the variations of the proposed scheme.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4987-4998
• /
• 2014

Recently, the use of nanotechnology in products is constantly expanding, and the problems on human health hazard has emerged as a major issue. A nanomaterials regulatory policy on the products is urgently required. This study analyzed the introduction of regulatory policies of nanomaterials contained in industrial products. In this study, the AHP (Analytic Hierarchy Process) method was applied and three regulatory policies were evaluated to analyze the validity of the introduction of a nanomaterials regulatory policy. To select the optimal regulatory policy, the policy evaluation criteria were set as enforcement (effectiveness), economics, acceptability, and protection. For the regulatory policies, self-regulation, product labelling, and enforced registration were introduced and evaluated as the regulatory policies, and product labelling was selected as the optimal regulatory policy.

• Journal of Korean Academy of Nursing
• /
• v.48 no.2
• /
• pp.123-142
• /
• 2018

Purpose: This study was conducted to evaluate the effectiveness of non-pharmacologic interventions in chemotherapy-induced peripheral neuropathy (CIPN). Methods: PubMed, Cochrane Library CENTRAL, EMBASE, CINAHL, and several Korean databases (Until August 2017) were searched. The main search strategy combined terms for peripheral neuropathy and presence of neoplasms. The risk of bias was assessed using the Cochrane's Risk of Bias tool for randomized studies and the Risk of Bias Assessment tool for non-randomized studies. To estimate the effect size, a meta-analysis of the studies was performed using the Rev Man 5.3 program of the Cochrane Library random-effects models were used in the analyses. Results: Twenty-two studies with a total of 954 participants met the inclusion criteria. Of the 22 studies, 12 were used to estimate the effect size of the non-pharmacologic interventions. The non-pharmacologic interventions used in patients with CIPN were exercise, acupuncture, massage, and foot bath. The acupuncture significantly reduced CIPN symptoms and signs (d=-0.71) and CIPN pain (d=-0.73) (p<.001). Massage and foot bath were also effective in reducing CIPN symptoms (d=-0.68; 95% CI=-1.05, -0.30; p<.001; $I^2=19%$).Exercises were effective in improving muscle strength and endurance(d=-0.55) and quality of life (d=-2.96), but they were not significantly effective in improving CIPN. Conclusion: Although these results provide little evidence of the effectiveness of acupuncture, massage, and foot bath in the treatment of CIPN, they suggest that these interventions can reduce CIPN symptoms in patients with cancer. However, the findings of this study should be interpreted with caution as there is a relative lack of data in this field, and additional well-designed studies are needed. PROSPERO registration: CRD42017076278.

• Korean Journal of Oriental Medicine
• /
• v.12 no.1
• /
• pp.13-22
• /
• 2006

Background and Aims: Herbal drugs and traditional medicines have lately attracted considerable attention by global pharmaceutical corporations because the conventional chemical drugs didn't work well for many chronic diseases or intractable diseases. The government of Korea is also supporting to develop the new drug which is high value added product, and the natural medicine including herbal medicine(or Traditional Korean Medicine) have a significant presence in this field. non-clinical pharmacology/toxicology study and clinical trial are the two major criteria which estimate efficacy and safety for registration of new drugs. All of the pharmaceutical companies producing herbal medicine and the academic and the academic world of Tradition Korean Medicine have the will to develop new herbal drugs, but there are obstacles that they have neither experience nor guideline about clinical trial. Therefore for developing new herbal drugs, it is necessary to research the present conditions and comprehensive systems about clinical trial in Northeast Asian countries China, Taiwan and Japan because they have the common background with Korea in traditional medicine fields. Methods : The present state of clinical trial for herbal medicine in Korea was investigated. And then, those in China, Taiwan, Japan was also investigated. Results and conclusions : There are significant differences among 4 Southeast Asian countries Korea, China, Taiwan and Japan each in present condition, purpose, involved comprehensive system including legislation, and actual operation of clinical trial for traditional medicine.

• Fire Science and Engineering
• /
• v.29 no.1
• /
• pp.27-37
• /
• 2015

This study is to analyze current inadequate status of installing hazardous materials facilities, and to propose rational standards by researching validity for implementing registration for design, construction, supervision for installing fire safety facilities. By studying installation of registering designing, constructing, supervising industry on hazardous material facilities, professional and higher level of stability measures for national hazardous material facility was provided. For above reasons, necessity of institutionalizing of registering standards for construction and supervising industry became clear. Much more gradual institutionalization is needed for construction industry. Moreover, new national qualification should be reconsidered, in order to rebuttal the above and also to cultivate and acquire technical power.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.45 no.2
• /
• pp.51-67
• /
• 2019

As dental implant surgery and bone grafts were widely operated in Korean dentist, many bone substitutes are commercially available, currently. For commercially used in Korea, all bone substitutes are firstly evaluated by the Ministry of Health and Welfare (MOHW) for safety and efficacy of the product. After being priced, classified, and registration by the Health Insurance Review and Assessment Service (HIRA), the post-application management is obligatory for the manufacturer (or representative importer) to receive a certificate of Good Manufacturing Practice by Ministry of Food and Drug Safety. Currently, bone substitutes are broadly classified into C group (bone union and fracture fixation), T group (human tissue), L group (general and dental material) and non-insurance material group in MOHW notification No. 2018-248. Among them, bone substitutes classified as dental materials (L7) are divided as xenograft and alloplastic bone graft. The purpose of this paper is to analyze alloplastic bone substitutes of 37 products in MOHW notification No. 2018-248 and to evaluate the reference level based on the ISI Web of Knowledge, PubMed, EMBASE (1980-2019), Cochrane Database, and Google Scholar using the criteria of registered or trademarked product name.