• 한국실내디자인학회논문집
• /
• 제20권2호
• /
• pp.10-19
• /
• 2011

This study is to predict the possibilities of phenomenological spatial design, by recognizing that a phenomenological spatial design brings about a change in the type, regime, role and materials of a spatiality due to the effect of contemporary digital technology and by analyzing their characteristics. Therefore, the study is based on the phenomenology of perception of Morris Merleau Ponty, which has the same concept to contemporary out-of-material and out-of-hierarchical paradigm. The case study has been carried out by selecting some of all works since 1980s, which were influenced by Merleau-Ponty. The analyses were performed by substituting the cases into the spatiality of Situation, spatiality of participation and creation, spatiality of retrospect and prospect, and the spatiality of unpredictability, which were the concept of phenomenological space of Merleau-Ponty for the analyses of features of type, regime, role and material of a spatial design. This article has a great significance in expecting the possibilities of changes of phenomenological spatial design by examining the characteristics of phenomenological spatial design.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1604-1615
• /
• 2023

In an open-pool type research reactor with a downward forced flow in the core, pipes can be under sub-atmospheric pressure because of the large pressure drop at the reactor core in the atmospheric pool. Sub-atmospheric pressure can result in air inflow into the pipe from the pressure difference between the atmosphere and the inside of the pipe, which in a postulated pipe break scenario can lead to the breakdown of the cooling pump. In this study, a plant-scale experiment was conducted to study air inflow in large piping systems by considering the actual operational conditions of an advanced research reactor. The air inflow rate was measured, and the entrained air was visualized to investigate the behavior of air inflow and flow regime depending on the pipe break size. In addition, the developed drift-flux model for a large vertical pipe with a diameter of 600 mm was compared with other correlations. The flow regime transition in a large vertical pipe under downward flow was also studied using the newly developed drift-flux model. Consequently, the characteristics of two-phase flow in a large vertical pipe were found to differ from those in small vertical pipes where liquid recirculation was not dominant.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2560-2565
• /
• 2003

The paper presented here covers the work associated with the flight control law design, ground based and in flight simulation and handling qualities assessment of the Fly-by-Wire type Aircraft (FBWA). The control law was designed for the most unstable aircraft configuration flight regime for the target aircraft (FBWA). The ground based simulation including math-model, real-time pilot-in-the-loop and iron bird simulation were used for validation of the control law before the experimental in-flight simulation on the IFS (In.Flight-Simulator) aircraft. The flight tests results showed that Level 1 handling qualities for the most unstable flight regime were achieved.

• The Korean Journal of Ecology
• /
• 제18권1호
• /
• pp.179-188
• /
• 1995

Death patterns of gap-makers and changes of environmental factors in gaps formed by disturbance were studied in Pinus densiflora forests of Youngwol, Mt, Mansu, Mt. Songni, Uljin, and Mt, Obong in Korea. Death pattern of gap-makers showed that standing deat type was the most frequent in all the study areas. Longevity of Pinus densiflora was about 140 years, which was about half of that of the temperate deciduous broad-leaved trees. size of gaps were distributed from $20m^2$ to $235m^2$, more than 80% of those were gaps created by death of two or more trees. Relative light intensity and water content of soil in gap area were higher than those in non-gap area and those in the central part of gap were the highest.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.100-105
• /
• 2001

The present paper is to present the results of studied of pressure drop in annuli with corrugated and spirally fluted inner tubes for the turbulent flow regime. To understand the underlying physical phenomena responsible for heat transfer enhancement, flow mechanism documented elsewhere are combined with pressure drop measurements to confirm the friction factors obtained from the annuli with the grooved inner tubes for the Reynolds number of 1000 to 8000. Friction factors were found to be functions of trough depth, pitch and angle, and the annulus radius ratio. friction factor increases in the spirally fluted tubes were larger than those in the corrugated tubes.

• Nuclear Engineering and Technology
• /
• 제17권1호
• /
• pp.34-44
• /
• 1985

본 연구의 주목적은 (1) 전극의 모양, 크기 및 재질, (2) 유동형태, 그리고 (3) 유전경계 (dielectric boundray)에 대한 전극의 상대적 위치 등이 캐패시턴스변환기를 이용한 기포율 측정과 유동영역 결정에 어떠한 영향을 미치는가를 연구하는 데에 있다. 실험 결과로부터 정적인 상태하에서 annular flow와 층류계 (stratified flow system)에 대하여, 측정한 상대 캐패시턴스(relative capacitance)와 기포율과의 상관 관계를 구하였다. 그리고, 이 결과를 이론적 예측치와 비교하였다. 이 연구 결과로부터 다음과 같은 결론을 얻었다. 즉 (1) annular flow와 stratified flow의 경우 모두 strip-type의 전극이 ring-type의 전극보다 더 민감하다. (2) 전극의 크기는 상대적 캐패시턴스 대 (1-$\alpha$)곡선에 아무런 영창을 미치지 않는다. (3)전극의 위치는 stratified flow에 대해서는 중요하나 annular flow에 대해서는 아무런 영향이 없다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2725-2730
• /
• 2007

Turbo-type molecular drag pumps ( MDPs ) are used in the liquid crystal display ( LCD ), semiconductor and other thin film industries. Siegbahn ( disk-type ) molecular drag pumps are used as high-pressure stages in the hybrid-type turbomolecular pumps, where they can operate in the viscous, the transition and the free molecular flow regime. In this study is performed to investigate the pumping characteristics of three-stage disk-type molecular drag pump ( DTDP ) in the molecular transition flow region. The experiments are measured using five vacuum pressure gauges in the positions for rotors of DTDP. The test is performed with nitrogen gas ( $N_2$ ).

• 한국가금학회지
• /
• 제21권1호
• /
• pp.41-48
• /
• 1994

본(本) 연구(硏究)에서는 난용계(卵用鷄) 산란기(産卵期)의 self-selection diets를 개발하기 위한 기초자료를 얻기 위하여 각종 선택채식(選擇採食) 방법(方法)에 의해 산란기의 사료(飼料) 및 영양소(營養素) 섭취형태(攝取形態)를 조사하였다. 선택채식시험을 위하여 옥수수사료, 대두박사료, 밀기울사료, 대두박+어분사료 그리고 석회석사료를 각각 만든 후 단일배합사료(單一配合飼料)를 급여(給與)하는 대조구(對照區)(C)와 옥수수-대두박-석회석사료(飼料) 선택채식구($T_1$), 옥수수-대두박-밀기울-석회석사료(飼料) 선택채식구($T_2$), 옥수수-대두박+어분-밀기울-석회석사료(飼料) 선택채식구($T_3$)등 4개처리에 유색산란계(有色産卵鷄)를 처리당 10수씩 총 40수를 공시(供試)하여 31주령과 41주령에 2회에 걸쳐 각 1주일간의 본(本) 시험(試驗)을 실시한 결과(結果)는 다음과 같다. 1. 처리별 산란률(産卵率)은 73.02~79.83%로 큰 차이는 없었으며, 1일중 시간대별(時間帶別) 산란분포(産卵分布)는 처리간에 큰 경향의 차이없이 07-13시의 오전시간에 대부분의 산란되었다. 2. 각 처리 공히 계란형성일(鷄卵形成日)에는 비형성일(非形成日)에 비해 사료(飼料) 및 영양소(營養素) 섭취량(攝取量)이 많았으며, 계란형성일에는 선택채식구(選擇採食區)들이 대조구(對照區)에 비해 에너지와 단백질(蛋白質) 섭취량(攝取量)이 적었다. 3. 계란형성일의 시간대별 사료(飼料)와 에너지 및 단백질섭취량(蛋白質攝取量)은 대조구(對照區)가 10시 이후부터 22시까지 계속 증가하였으나, 선택채식구(選擇採食區)들은 10시 이후부터 22시까지 계속 증가하였으나, 선택채식구(選擇採食區)들은 10시 이후부터 증가하다가 19~22시의 마지막 3시간 동안의 섭취량(攝取量)이 감소하였다. 4. 계란 형성일의 시간대별 칼슘섭취량(攝取量)은 대조구(對照區)가 10시 이후부터 22시까지 계속 완만하게 증가하였으며, 선택채식구(選擇採食區)은 16시 이전까지는 대조구(對照區)보다 훨씬 적었으나 16시 이후에는 급격히 증가하여 대조구(對照區)보다 훨씬 많이 섭취(攝取)하였다. 결론적으로 난용계(卵用鷄) 산란기에는 영양소요구량(營養素要求量)의 주기적인 변화에 대처할 수 있는 복수선택채식사료(複數選擇採食飼料)의 개발이 필요하다고 생각된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1692-1697
• /
• 2004

The once-through heat recovery steam generator is ideally matched to very high temperature and pressure, well into the supercritical range. Moreover this type of boiler is structurally simpler than drum type boiler. In drum type boiler, each tube play a well-defined role: water preheating, vaporization, superheating. Empirical equations are available to predict the average heat transfer coefficient for each regime. For once-through heat recovery steam generator, this is no more the case and mathematical models have to be adapted to account for the disappearance of drum type economizer, boiler, superheater. General equations have to be used for each tube of boiler, and actual heat transfer condition in each tube has to be identified.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.46-49
• /
• 2003

Aluminum based metal matrix composites(MMCs) are well known for their high specific strength, stiffness and hardness. They are gaining further importance because of their high wear resistance. In this study, Al/Saffil-20%, Al/Saffil-5%/Al2O3(particle type)-15% and Al/Saffil-5%/SiC(particle type)-15% hybird MMCs' wear behavior were characterized by the pin-on-disk test under various normal load The superior wear resistance was exhibited at Al/Saffil-5%/SiC(particle type)-15% MMCs. And this MMCs' predominant wear mechanism is subsurface cracking in the low load wear regime. Others(Al/Saffil-20%, Al/Saffil-5%/Al2O3(particle type)-15%) showed the similar wear resistance with each other at the same test condition. In the low load & room temperature condition, the wear resistance was improved due to the high hardness of the ceramic reinforcements. As the test load increased, the wear properties were governed by the wear properties of matrix.