• Journal of Life Science
• /
• v.19 no.5
• /
• pp.671-675
• /
• 2009

Prostate cancer has been a critical health problem due to an increase of prostate cancer-related deaths worldwide. Also, a frequent treatment option for prostate cancer is androgen ablation, but this treatment has a limited scope, especially for hormone-refractory cancer. There is an urgent need for the identification of alternative therapeutic strategies for prostate cancer. Previously, over one hundred species of dried-plant methanol extracts were tested for inhibitory effects on proliferation. One of them, Piper longum Linn. was selected based on its potent anti-proliferation effect. The dried root of P. longum Linn. was extracted with 100% methanol for 2-3 days and its extract was fractionated using chloroform. The chloroform layer was then subjected to column chromatography on silica gel, reverse phase-18 (RP-18) and Sephadex LH-20, in turn. Finally, the pure compound was obtained and identified as pipernonaline by NMR spectroscopic and physico-chemical analysis. In this study, anti-proliferation and cell cycle arrest effects of pipernonaline on human prostate cancer PC-3 cells were investigated using the MTT and PI staining, respectively. Our findings suggest that pipernonaline represents a dose-dependent growth inhibition pattern on PC-3 cells and, moreover, its growth inhibition is associated with sub-G1 and G0/G1 cell cycle accumulation in PC-3 cells. Also, these results provide an anticancer candidate for human prostate cancer.

• Journal of Energy Engineering
• /
• v.11 no.2
• /
• pp.149-159
• /
• 2002

In the entrained flow gasifiers, the slag viscosity is an important parameter determining the operation conditions. The slag viscosities of 9 coals, which were selected and tested as possible gasification feedstock in Korea, were measured in a high temperature slag viscometer under gasification conditions. The type and size of crystalline phases that were known to affect the slag viscosity behavior were also determined. The slag samples were obtained from the IEA dry-feed gasifier. The slags of Alaska Usibelli, Curragh, Kideco, Adaro, Denisovsky, Baiduri and Drayton coals showed the behavior of crystalline slags, while those of Datong and Cypurus glassy slags. When a recommended minimum operating temperature was arbitrarily defined as $T_{1000}$poise/+$50^{\circ}C$ for glassy slags and $T_{cv}$ +$50^{\circ}C$ for crystalline slags, the Drayton slag required the lowest temperature, while Denisovsky slag required the highest. All the slags contained C $r_2$ $O_3$ from the refractory. The crystalline slags with $T_{cv}$ at around 132$0^{\circ}C$ contained large anorthites as the major crystalline phase that would have caused the rapid inrease in viscosity. Denisovsky slag contained many pores which were formed by $O_2$ from F $e_{x}$O reduction..

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.345-350
• /
• 2006

This study investigated the removal of recalcitrant organics in dyeing wastewater using a fluidized bed reactor(FBR) that contained cell-immobilized pellets. The pellets were manufactured and condensing the gel phase by mixing PEG-polymer and cells to form micro-porous PEG-polymer pellets whose size were ${\Phi}\;4mm{\times}H\;4mm$ on average. An industrial activated sludge without any pre-adaptation was used for the cell immobilization because it gave an equivalent removal efficiency to a pre-adapted sludges. The feed was obtained from an effluent of a biological treatment plant, which contained $SCOD_{Cr}$ of 330 mg/L and $SBOD_5$ of 20 mg/L. The $SCOD_{Cr}$ removal efficiency was over 45% and the effluent $COD_{Mn}$ concentration was less than 100 mg/L at HRTs from 6 to 24 hrs. The optimum HRT in the FBR was determined as 12 hrs considering the removal efficiency and cost. When a raw wastewater containing 768 mg/L of $COD_{Cr}$ was fed to the FBR, the effluent $COD_{Cr}$ concentration increased only slightly, giving a 70% of $COD_{Cr}$ removal or a 97% of $BCOD_5$ removal. This indicated that the FBR had an excellent capability of biodegradable organics removal also. In conclusion, the FBR could be applied to textile wastewater treatment in place of an activated sludge process.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.1
• /
• pp.91-99
• /
• 2008

A multilayer tower-type photoreactor, in which $TiO_2$-coated glass-tubes were installed, was used to measure the vapor-phase BTEX removal efficiencies by ozone oxidation ($O_3$/UV), photocatalytic oxidation ($TiO_2$/UV) and the combination of ozone and photocatalytic oxidation ($O_3/TiO_2$/UV) process, respectively. The experiments were conducted under various relative humidities, temperatures, ozone concentrations, gas flow rates and BTEX concentrations. As a result, the BTEX removal efficiency and the oxidation rate by $O_3/TiO_2$/UV system were highest, compared to $O_3$/UV and $TiO_2$/UV system. The $O_3/TiO_2$/UV system accelerated the low oxidation rate of low-concentration organic compounds and removed organic compounds to a large extent in a fixed volume of reactor in a short time. Therefore, $O_3/TiO_2$/UV system as a superimposed oxidation technology was developed to efficiently and economically treat refractory VOCs. Also, this study demonstrated feasibility of a technology to scale up a photoreactor from lab-scale to pilot-scale, which uses (i) a separated light-source chamber and a light distribution system, (ii) catalyst fixing to glass-tube media, and (iii) unit connection in series and/or parallel. The experimental results from $O_3/TiO_2$/UV system showed that (i) the highest BTEX removal efficiencies were obtained under relative humidity ranging from 50 to 55% and temperature ranging from 40 to $50^{\circ}C$, and (ii) the removal efficiencies linearly increased with ozone dosage and decreased with gas flow rate. When applying Langmuir-Hinshelwood model to $TiO_2$/UV and $O_3/TiO_2$/UV system, reaction rate constant for $O_3/TiO_2$/UV system was larger than that for $TiO_2$/UV system, however, it was found that adsorption constant for $O_3/TiO_2$/UV system was smaller than that for $TiO_2$/UV system due to competitive adsorption between organics and ozone.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.75-87
• /
• 1996

This review is presented under the following headings: 1.Introduction 1.1 Brief review of the properties of AlN 1.2 Historical survey of work on ceramic and single crystal AlN 2.Thermochemical background 3.Crystal growth 4.Doping 5.Potential applications and future work The known properties of AlN which make it of interest for various are discussed briefly. The properties include chemical stability, crystal structure and lattice constants, refractive indices and other optical properties, dielectric constant, surface acoustic wave velocity and thermal conductivity. The history of work in single crystals, thin films and ceramics are outlined and the thermochemistry of AlN reviewed together with some of the relevant properties of aluminium and nitrogen; the problems encountered in growing crystals of AlN are shown to arise directly from these thermochemical relationships. Methods have been reported in the literature for growing AlN crystals from melts, solution and vapour and these methods are compared critically. It is proposed that the only practicable approach to the growth of AlN is by vapour phase methods. All vapour based procedures share the share the same problems: $.$the difficulty of preventing contamination by oxygen & carbon $.$the high bond energy of molecular nitrogen $.$the refractory nature of AlN (melting point~3073K at 100ats.) $.$the high reactivity of Al at high temperatures It is shown that the growth of epitactic layers and polycrystalline layers present additional problems: $.$chemical incompatibility of substrates $.$crystallographic mismatch of substrates $.$thermal mismatch of substrates The result of all these problems is that there is no good substrate material for the growth of AlN layers. Organometallic precursors which contain an Al-N bond have been used recently to deposit AlN layers but organometallic precursors gave the disadvantage of giving significant carbon contamination. Organometallic precursors which contain an Al-N bound have been used recently to deposit AlN layers but organometallic precursors have the disadvantage of giving significant carbon contamination. It is conclude that progress in the application of AlN to optical and electronic devices will be made only if considerable effort is devoted to the growth of larges, pure (and particularly, oxygen-free) crystals. Progress in applications of epi-layers and ceramic AlN would almost certainly be assisted also by the availability of more reliable data on the pure material. The essential features of any stategy for the growth of AlN from the vapour are outlined and discussed.

• The Korean Society of Law and Medicine
• /
• v.10 no.2
• /
• pp.309-341
• /
• 2009

According to a case of Supreme Court's Sentence No. 2009DA17417 (May 21, 2009), the Supreme Court judges that 'the right to life is the ultimate one of basic human rights stipulated in the Constitution, so it is required to very limitedly and conservatively determine whether to discontinue any medical practice on which patient's life depends directly.' In addition, the Supreme Court admits that 'only if a patient who comes to a fatal phase before death due to attack of any irreversible disease may execute his or her right of self-determination based on human respect and values and human right to pursue happiness, it is permissible to discontinue life-sustaining treatment for him or her, unless there is any special circumstance.' Furthermore, the Supreme Court finds that 'if a patient who is attacked by any irreversible disease informs medical personnel of his or her intention to agree on the refusal or discontinuance of life-sustaining treatment in advance of his or her potential irreversible loss of consciousness, it is justifiable that he or she already executes the right of self-determination according to prior medical instructions, unless there is any special circumstance where it is reasonably concluded that his or her physician is changed after prior medical instructions for him or her.' The Supreme Court also finds that 'if a patient remains at irreversible loss of consciousness without any prior medical instruction, he or she cannot express his or her intentions at all, so it is rational and complying with social norms to admit possibility of estimating his or her own intentions on withdrawal of life-sustaining treatment, provided that such a withdrawal of life-sustaining treatment meets his or her interests in view of his or her usual sense of values or beliefs and it is reasonably concluded that he or she could likely choose to discontinue life-sustaining treatment, even if he or she were given any chance to execute his or her right of self-determination.' This judgment is very significant in a sense that it suggests the reasonable orientation of solutions for issues posed concerning withdrawal of meaningless life-sustaining medical efforts. The issues concerning removal of medical instruments for meaningless life-sustaining treatment and discontinuance of such treatment in regard to medical treatment for terminal cases don't seem to be so much big deal when a patient has clear consciousness enough to express his or her intentions, but it counts that there is any issue regarding a patient who comes to irreversible loss of consciousness and cannot express his or her intentions. Therefore, it is required to develop an institutional instrument that allows relevant authority to estimate the scope of physician's medical duties for terminal patients as well as a patient's intentions to withdraw any meaningless treatment during his or her terminal phase involving loss of consciousness. However, Korean judicial authority has yet to clarify detailed cases where it is permissible to discontinue any life-sustaining treatment for a patient in accordance with his or her right of self-determination. In this context, it is inevitable and challenging to make better legislation to improve relevant systems concerning withdrawal of life-sustaining treatment. The State must assure the human basic rights for its citizens and needs to prepare a system to assure such basic rights through legislative efforts. In this sense, simply entrusting physician, patient or his or her family with any critical issue like the withdrawal of meaningless life-sustaining treatment, even without any reasonable standard established for such entrustment, means the neglect of official duties by the State. Nevertheless, this issue is not a matter that can be resolved simply by legislative efforts. In order for our society to accept judicial system for withdrawal of life-sustaining treatment, it is important to form a social consensus about this issue and also make proactive discussions on it from a variety of standpoints.

• Resources Recycling
• /
• v.33 no.4
• /
• pp.47-61
• /
• 2024

As a recycling technology for recovering zinc contained in large amounts in electric arc furnace dust (EAFD), the most commercialized technology in the world is the Wealz Kiln Process. The Wealz Kiln Process is a process in which components such as Zn and Pb in EAFD are reduced/volatile (endothermic reaction) in high-temperature Kiln and then re-oxidized (exothermic reaction) in the gas phase and recovered in the form of Crude zinc oxide (60wt%Zn) in the Bag Filter installed at the rear end of Kiln. In this study, an experimental Wealz kiln was produced to investigate the optimal process variable value for practical application to the recycling process of large-scale kiln on a commercial scale. Additionally, Pellets containing EAFD, reducing agents, and limestone were continuously loaded into Kiln, and the amount of input, heating temperature, and residence time were examined to obtain the optimal crude zinc oxide recovery rate. In addition, the optimal manufacturing conditions of Pellets (drum tilt angle, moisture addition, mixing time, etc.) were also investigated. In addition, referring to the SiO₂-CaO-FeO ternary system diagram, the formation behavior of a low melting point compound, a reaction product inside Kiln according to the change in the basicity of Pellet, and the reactivity (adhesion) with the castable constructed on the inner wall of Kiln were investigated. In addition, in order to quantitatively investigate the possibility of using anthracite as a substitute for Coke, a reducing agent, changes in the temperature distribution inside Kiln, where oxidation/reduction reactions occur due to an increase in the amount of anthracite, the quality of Crude zinc oxide, and the behavior of tar in anthracite were also investigated.