• 조명전기설비학회논문지
• /
• 제26권6호
• /
• pp.1-7
• /
• 2012

Recently an optical diffusion of LED lamps has been studied actively. In this paper, the second lens applied to a cover of the LED lamp was analytically designed to having a wide angle distribution of light without diffuser characteristic by dispersing agent. In this process, We found a major factors that can help improve the performance of the lens. It is the refractive power of the lens, the Mie particle density of phosphor, and the arrangement of the LED. Through the final simulation, we can see the LED lamp is possible to get wide angle light distribution by proper source modeling and second lens designing. Also, we can see this simulated results are entirely consistent with measured data for light distribution. In this research, we present the shape of the second lens with wide angle distribution and derive the important factors for the second lens design.

• Current Optics and Photonics
• /
• 제2권1호
• /
• pp.47-52
• /
• 2018

We systematically investigated the negative-refraction effect for both TE and TM polarizations in annular photonic crystals. Since two polarization waves are excited in different bands, they result in different refractive angles, and so polarization beam splitters can be made of annular photonic crystals. It was found that, in comparison to normal square-lattice air-hole photonic crystals, annular photonic crystals have a much wider common frequency band between TE-1 and TM-2, which is quite beneficial to finding the overlap between the negative-refraction regions belonging to TE-1 and TM-2 respectively. Further analyses of equifrequency surfaces and the electric-field distribution of annular photonic crystals with different parameters have not only demonstrated how the filling factor of annular cells affects the formation of the common negative-refraction region between TE-1 and TM-2, but also revealed some ways to improve the performance of a polarization beam splitter based on the negative-refraction effect in an annular photonic crystal.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.484-485
• /
• 2003

We report on the optimization of the fabrication process of hybrid sol-gel thin film deposition to produce low cost $1 {\times} 16$ splitters for optical communications. We learn that sol-gel film thickness is dependent upon the spinning speeds and viscosity of the sol-gel solutions and refractive index upon the dopant concentrations of Al and Zr in the sol solutions. We could find the optimized physical conditions to achieve the desired thickness of core and cladding layers. We will further carry out the fabrication and measurements of insertion loss, polarization dependent loss (PDL), etc. for the performance of fabricated splitter devices.

• 한국기계가공학회지
• /
• 제6권1호
• /
• pp.7-12
• /
• 2007

The optic industry is a high value-added advanced technology industry combined with the precision machine industry and the digital electronics industry. The aspheric lens, one of optic parts, is a key technology having a significant influence on the performance of optic equipment. So this study relates to designing an aspheric lens to which a ray-tracing method is applied. In the ray-tracing method, a refractive index of material is used, which take an advantage that the location of a light source and incident angle can be fixed, unlike the ray back-tracing scheme.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.145-149
• /
• 1997

A laser mesurement system, a modified Michelson interferometer,which can accurately measure high speed length and position of servomechanisms by detecting a phase shift in the measurement beam using an optical interference was developed. A frequency stabilized laser source and a 20 fold frequency interpolation and digitizing circuit were applied to the system. The refractive index of the ambient air was calibrated through the Edlen's formula. The system achieved a resolution of .lambda./40,16nm, a maximum allowable measurement speed of 600 mm/sec, and a length measurement range of 1500mm. Performance of the system was evaluated on the machining center in short and long length measurements

• 전자공학회논문지D
• /
• 제34D권4호
• /
• pp.87-93
• /
• 1997

An electro-optic polymer digital optical switch with a coupling region modified for optimum mode coupling is proposed, and it is analyzed by using the beam propagation method combined with the effective index method. Its modified coupling region is adiabatically introduced along the propagation direction from the branching point of the two waveguides. The structure of the modified coupling region and its refractive index profiles are designed to optimize the mode coupling in the Y-branch waveguide. Therefor, the switching performance of the device may be enhanced with a fixed device length. It is confirmed from the numerical calculation that the drive voltage is reduced by more than 30 percents and te crosstalk is improved by about 8dB.

• 한국광학회지
• /
• 제5권3호
• /
• pp.431-436
• /
• 1994

가시광선과 근적외선에서 광학유리 및 액체의 굴절률을 정밀측정하기 위하여 Littrow 프리즘을 이용한 자동시준형 분광굴절률 측정장치를 설계, 제작하였다. 먼저 여러가지 측정변수를 변화시켜 측정정확도를 분석하였으며 rotary encoder와 position sensitive detector를 이용한 고분해능 각도측정장치와 항온장치등을 제작하였다. 마이크로 컴퓨터를 사용하여 측정자동화 하였으며 자세한 설계변수와 성능평가 결과를 제시하였다.

• 한국군사과학기술학회지
• /
• 제11권3호
• /
• pp.50-57
• /
• 2008

A telemetry ground station has a highly directional, parabolic tracking antenna to receive a weak telemetry signal from a target at a distance. The tracking antenna with narrow beam-width normally uses the auto-track method for the target tracking. This paper presents several issues in the auto-track method and introduces a new tracking method using Self-Slaving technique. Self-Slaving means that the tracking antenna is slaved to not data measured by RADAR but GPS/INS informations received by the telemetry system for pointing. The Self-Slaving method shows good performance in comparison with auto-track method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.905-909
• /
• 2002

Characteristics of reflective LCDs, which have gained a lot of notice in recent years, rely largely on optical design of circular polarizers and the quarter-wave plates, as a component. Important design includes wavelength dispersion, viewing angle, uniformity of display and matching of refractive index. Our work has contributed to improving performance of reflective LCDs by enhancing the characteristics of polymer film using stretching and optical lamination technologies. To design that offers higher contrast and wider viewing angle, we have discovered that it is necessary to control viewing angle variation of the polarizing axis in order to compensate for the viewing angle of the polarizing film as well as the optical anisotropic properties of liquid crystal. Applying this technology to circular polarizers used for reflective LCDs enables design of wide viewing angle circular polarizers. In order to realize higher contrast for reflective LCDs, it is also necessary to design other optical materials including polarizing films. For design of hybrid optical film, it is particularly necessary to reduce surface reflection and interface reflection. This paper also reports our findings concerning this topic.

• 한국광학회지
• /
• 제4권4호
• /
• pp.390-396
• /
• 1993

1차원 telecentric paraxial holographic kinoform을 푸리에변환 렌즈로 사용하는 경우에 있어서, 3가지 표면양각형태, 즉 평면-볼록면, 블록면-평면, 좌우대칭 불록면에 대하여 스넬의 법칙을 기반으로 하는 엄밀한 광성추적법을 적용하여 분석하였다. kinoform은 F/8, 초점거리 15mm이며 kinoform과 그 주변 매질의 굴절율을 변화시키므로써 zone수와 두께 그리고 포물면의 경사도를 변화시켰다. 일반적으로 좌우대칭 볼록면 형태가 가장 좋은 성능을 갖는 것으로 나타났고, 모든 경우에 있어서 포물면의 경사도가 증가함에 따라 입사각의 증가에 따른 성능이 저하되었다.