• Korean Journal of Environmental Agriculture
• /
• v.30 no.4
• /
• pp.414-418
• /
• 2011

BACKGROUND: Plastic mulches widely used in raised-bed culture mainly to conserve water, control weeds and raise soil temperature. The most widely used plastic mulch colour is black. Reflective red and far-red light can affect on growth and yield of various vegetable crops. Objectives of this study were to investigate the characteristics of reflective light of black and red plastic mulches, and to evaluate the reflective red and far-red light on the quality characteristics and yield of the Oriental melon (Cucumis. Melo L.) and tomato (Lycopersicon esculentum L.). METHODS AND RESULTS: Oriental melon and tomato were cultivated over the reflective red and black plastic mulches in plastic house. Reflected red and far-red light over the red plastic mulch were 2.6 times higher than those of black plastic mulch. Red to F-Red ratio of black plastic mulch, red plastic mulch and sunlight were 1.14, 0.93 and 1.16 respectively. Intensity of reflected red and far-red light over red plastic mulch were highest at surface height of 30 cm. The higher the height of the surface decrease the intensity of far-red light. Accordingly, Red to F-Red ratio were increased. Reflective red plastic mulch increased the weight of fruit and content of sugar in Oriental melon and tomato. CONCLUSION(s): Yield of Oriental melon over reflective red plastic mulch was higher than that of black plastic mulch. These results suggested that reflected red and far-red light over the red plastic mulch affected allocation of photosynthate in growing Oriental melon.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.875-880
• /
• 2004

Stray light is the light except the light of the analytic wavelength and the source of measurement error of absorbance. Some experimental results showed that diffractive grating is the major factor of stray light in spectrophotometer. Through the ray tracing with the software tool, classified the paths of the diffractive light from grating and found the range of wavelength which reach the exit slit. The quantity of the stray light(0.025％) is more than the minimum limit of stray light(0.01％) of the single monochromator. A novel optical layout design method, which prevent the reflected rays entering the diffractive grating is proposed.

• Solar Energy
• /
• v.17 no.4
• /
• pp.35-43
• /
• 1997

An increase in the design of commercial buildings with daylighting is beginning to receive more attention, claimed by some as a second revolution in architecture. The benefits of daylighting may vary significantly because a characteristic of daylight is the way in which it varies. Indirect sunlight, however, received in the interior of a building after reflection, can serve a useful purpose as the main source of illumination. In a cloudy climate it can serve as an occasional welcome addition to the available skylight. Also, site constraints or surrounding urban context may necessitate using reflected light sources, or such sources may be an integral part of the overall design objectives and aesthetics of the proposed projects. When reflected sunlight is introduced into a space, its role in general illumination is what is of interest in this study. Results show that reflected sunlight may help the general illumination in almost same level of significance as daylight from diffuse sky. It is also summarized that the contribution of reflected sunlight to general illumination through the year round may be even and uniform regardless of the season. Consequently, introduction of reflected sunlight should be regarded as one of the successful means to enhance the visual environment in quantitative and qualitative way.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.573-576
• /
• 2005

A compact linear and angular displacement measurement device was developed by combining a Michelson interferometer and an autocollimator to characterize the movement of a precision stage. A Michelson interferometer and an autocollimator are typical devices for measuring linear and angular displacement, respectively. By controlling the polarization of reflected beam from the target mirror of the interferometer, some part of light was retro-reflected to the light source and the reflected beam was used for angle measurement. The interferometer and the autocollimator use the same optic axis and the target mirror can be easily and precisely aligned orthogonal to the optic axis by monitoring the autocollimator s signal. The autocollimator was designed for angular resolution of 0.1 arcsec and dynamic range of 60 arcsec. The nonlinearity error of interferometer was minimized by trimming the gain and offset of the photodiode signals. Through the experiments, we evaluate the performance of measurement device and discuss its applications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1251-1253
• /
• 2004

Light diffraction on optically anisotropic substrates with the surface microrelief has been calculated by using the OAGSM method. Varying of the microrelief depth and material birefringence allows to realize different polarization state of the light beam transmitted or reflected by the substrate. The approach can be used to optimize the LCD backlight.

• Current Optics and Photonics
• /
• v.4 no.2
• /
• pp.141-147
• /
• 2020

To understand the cause of the high light transmittance of the human eye, the optical effects of the collagen fibers of the stroma layer, which constitute the majority of the cornea, were analyzed. These collagen fibers, approximately 20 nm in diameter, have a regular arrangement. Accordingly, the optical properties of the collagen fibers and the fiber layer were analyzed by simulation. A standing wave was formed in the incident space by the overlapping incident light and the light reflected by the plate. In addition, it was confirmed that when the collagen fibers are arranged in a layer, the light transmittance periodically changes, depending on the number of fiber layers. The standing wave was formed in the incident space, and the light's intensity distribution was changed by the nanoscale collagen fibers in the section with the collagen layer, which affected the transmittance. To explain this phenomenon, the collagen fiber was defined as a second light source, and an attempt was made to describe the simulation results in terms of overlap of the incident light with the light emitted from the collagen fiber.

• Journal of Biomedical Engineering Research
• /
• v.13 no.4
• /
• pp.299-306
• /
• 1992

For quantitative measurement of reflected light from a clinical diagnostic scrip, a prototype of reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate re(leclance parameters. The strop was illuminated at $45^{\circ}C$ through optical fiber and the intensity of reflected light was determined at rectangulat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/dl about glucose, a saturation state of absorbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm.

• Journal of Biomedical Engineering Research
• /
• v.7 no.1
• /
• pp.35-40
• /
• 1986

For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm.

• Korean Journal of Optics and Photonics
• /
• v.10 no.5
• /
• pp.369-372
• /
• 1999

We have constructed an interferometric microscopy using a Michelson interferometer and a He-Ne laser. The three dimensional image was obtained by the interference from the reflected signal by a sample surface and from the reflected signal by a mirror. The axial resolution obtained by Michelson interferometric microscopy is as good as that of the white-light interferometer, but the same fringe is obtained when optical path difference is half-wavelength. The image from Michelson interferometric microscopy was compared with the images from the various types of confocal microscopy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.712-715
• /
• 2011

When simulate long distance infrared image in the laboratory the Infrared Refractive Collimator is used. In this case, infrared light reflected from the surface of the lens and target. The reflected infrared light causes Narcissus. Narcissus degrades the quality of the infrared image. To minimize Narcissus optimize the reflective index and placement of the lenses, lenses and target surface coated.