• Journal of Institute of Convergence Technology
• /
• v.7 no.1
• /
• pp.11-14
• /
• 2017

At present, the Korea Meteorological Administration (KMA) measures the horizontal solar irradiation with time in 33 areas. Among these measured data, this study analyzed the tendency of applying the new analysis method by using the horizontal solar irradiation with the time which was measured in 18 regions across the country for ten years from 2005 to 2014. The method applied to the analysis is to compare the value of the annual total horizontal solar irradiance for one year with the value of that for the previous year of each year, and give +1 when it is higher than the reference ratio, 0 if it is within the reference ratio, and -1 when it is lower than the reference ratio. The characteristics of each region and nationwide characteristics according to the change of each reference ratio were evaluated and analyzed. Through the analysis results, the analysis method applied in this study could be well describe the characteristics of the solar irradiance during some years.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.821-827
• /
• 2014

An isotope dilution liquid chromatography tandem mass spectrometry (ID LC-MS/MS) method has been developed and applied to the determination of arsenobetaine (AsB, ${(CH_3)_3}^+AsCH_2COO^-$) from oyster candidate certified reference material (CRM). The exact matching isotope dilution approach was adopted for accurate determination of AsB using $^{13}C_2$-labeled AsB as an internal standard. Efficiencies of different AsB extraction methods were evaluated using a codfish reference material and a simple sonication method was selected as the method of choice for the certification of the oyster candidate CRM. The hydrophilic interaction liquid chromatography (HILIC) combined with electrospray ionization tandem mass spectrometry (ESI/MS/MS) in selected reaction monitoring (SRM) mode was optimized for adequate chromatographic retention and robust quantification of AsB from codfish and oyster samples. By analyzing 12 subsamples taken from each 12 bottles systematically selected from the whole oyster CRM batch, the certified value of AsB was determined as $6.60mg{\cdot}kg^{-1}{\pm}0.31mg{\cdot}kg^{-1}$ and it showed excellent between-bottle homogeneity of less than 0.42%, which is represented by relative standard deviation of 12 bottles from the CRM batch. The major source of uncertainty was the certified value of the AsB standard solution.

• Journal of architectural history
• /
• v.21 no.4
• /
• pp.37-46
• /
• 2012

This study examines the construction method of lime tomb of royal tombs in the Choseon Dynasty based on reference. This was primarily published as "The Five Manners and Courtesy of the Annals of Sejong" as examples, which were followed by the influence of Koryo's culture in the beginning foundation of Choseon, were organized in the time of Sejong; and later, in the time of Sungjong, "The National Five Manners and Courtes y" was published. Such old reference explains the stone materials and construction method of the royal tomb's pit yet there were not many studies regarding the pit of royal tomb in the Choseon Dynasty. And there exists no historical research or reference study in regard to the pit of royal tomb which is formed as a lime tomb. This is believed to be impossible to excavate the royal tomb since ancestral ritual formalities are still given by the descendants and because of our country's culture of giving ancestral ritual formalities which value formalities and filial duty. However, the current excavation of Guhui Tomb, which was the early burial site, was important since it gives an opportunity to look at the shape and structure of lime tombs in the Choseon Dynasty. Thus, this study, based on the excavation of Guhui Tomb, will look into the construction method of the pit of lime tomb and will examine the structure, shape, construction method, etc. of the lime tomb which was formed after the time of Sejo in a way with reference history. This is an important data to learn the construction method of limb tomb of royal tombs in the Choseon Dynasty and is believed to have a very important value as historical materials as to understanding the structure of the pit of royal tombs in the Choseon Dynasty which yet has not been excavated.

• Journal of Yeungnam Medical Science
• /
• v.8 no.1
• /
• pp.154-165
• /
• 1991

To establish the hematological reference values in the healthy adults visited our hospitals, following examination were done on 2823 persons by Coulter Counter Model S-plus II ; white blood cell count: (WBC), red blood cell count(RBC), hemoglobin(Hb), hematocrit(Hct), mean corpuscular volume (MCV), mean corpuscular hemoglobin(MCH), mean corpuscular hemoglobin concentration(MCHC), red cell distribution width(RDW), platelet, plateletcrit, mean platelet volume(MPV) and platelet distribution width(PDW). The following results are obtained. 1) Male, mean value of WBC ; $6,800{\pm}2,680(2SD)/{\mu}l$ Female, mean value of WBC ; $5,950{\pm}2,380(2SD)/{\mu}l$ 2) Male, mean value of RBC ; $428{\pm}60(2SD){\times}10^4/{\mu}l$ Female, mean value of WBC ; $415{\pm}56(2SD){\times}10^4/{\mu}l$ 3) Male, mean value of Hb ; $15.4{\pm}1.8(2SD)g/dL$ Female, mean value of Hb ; $13.0{\pm}1.6(2SD)g/dL$ 4) Male, mean value of Hct ; $45.3{\pm}5.0(2SD)%$ Female, mean value of Hct ; $38.2{\pm}4.6(2SD)%$ 5) Male, mean value of MCV ; $93.8{\pm}5.8(2SD)fL$ Female, mean value of MCV ; $92.2{\pm}7.4(2SD)fL$ 6) Male, mean value of MCH ; $31.8{\pm}2.2(250)pg$ Female, mean value of MCH ; $31.4{\pm}2.8(2SD)pg$ 7) Male, mean value of MCHC ; $34.0{\pm}1.2(2SD)%$ Female, mean value of MCHC ; $33.9{\pm}1.2(2SD)%$ 8) Male, mean value of RDW ; $12.7{\pm}1.0(2SD)%$ Female, mean value of RDW ; $12.6{\pm}1.4(2SD)%$ 9) Male, mean value of Platelet ; $242.9{\pm}87.8(2SD){\times}10^3/{\mu}l$ Female, mean value of Platelet ; $242.2{\pm}89.0(2SD){\times}10^3/{\mu}l$ 10) Male, mean value of Plateletcrit ; $0.201{\pm}0.076(2SD)%$ Female, mean value of Plateletcrit ; $0.204{\pm}0.076(2SD)%$ 11) Male, mean value of MPV ; $8.20{\pm}1.70(2SD)fl$ Female, mean value of MPV ; $8.36{\pm}1.82(2SD)fl$ 12) Male, mean value of PDW ; $16.1{\pm}0.8(2SD)%$ Female, mean value of PDW ; $16.0{\pm}0.8(2SD)%$.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.18-23
• /
• 2008

In this paper, we propose the input image selection-method to improve the reconstructed high-resolution (HR) image quality. To obtain ideal super-resolution (SR) reconstruction image, all input images are well-registered. However, the registration is not ideal in practice. Due to this reason, the selection of input images with low registration error (RE) is more important than the number of input images in order to obtain good quality of a HR image. The suitability of a candidate input image can be determined by using statistical and restricted registration properties. Therefore, we propose the proper candidate input Low Resolution(LR) image selection-method as a pre-processing for the SR reconstruction in automatic manner. In video sequences, all input images in specified region are allowed to use SR reconstruction as low-resolution input image and/or the reference image. The candidacy of an input LR image is decided by the threshold value and this threshold is calculated by using the maximum motion compensation error (MMCE) of the reference image. If the motion compensation error (MCE) of LR input image is in the range of 0 < MCE < MMCE then this LR input image is selected for SR reconstruction, else then LR input image are neglected. The optimal reference LR (ORLR) image is decided by comparing the number of the selected LR input (SLRI) images with each reference LR input (RLRI) image. Finally, we generate a HR image by using optimal reference LR image and selected LR images and by using the Hardie's interpolation method. This proposed algorithm is expected to improve the quality of SR without any user intervention.

• Journal of the Korean Society for Library and Information Science
• /
• v.33 no.4
• /
• pp.65-83
• /
• 1999

This study is intended to build a cross-reference system as syndetic device to provide bibliographic relations and to collocate variant access points through references, by developing a reference record format. To this end, the method of this study are as follows: First, the roles of references, which have long been used in traditional records, have been reviewed. Second, ways in which references are depicted not only by current cataloging rules but also by authority control systems are examined. Major characteristics of the reference record are summarized as fellows: 1) If variations either of an author name or of a title are made, or any related works are published, only a single reference record is created. This record uses existing authority records, and instead of adopting authority headings, it will expand the function of the explanatory reference as well as newly implementing a relational reference which can later be used as a reference record. 2) All the variations of identical personal or group names and of lilies are dealt as one access point. In place of current 'see' and 'see also' references, not drawing lines between authority heading(1XX field), 'see'(4XX field) and 'see also' reference(5XX field), all forms of names will be simply applied to record field '1XX'. 3) Any form of data elements, which are used as access points, will be described in '1XX' which has equal value. When a need arises to explain relationships between various access points, it can be met by applying the general explanation reference-name(666 field). Similarly, when there is a need to articulate bibliographic relationships between related works, they will be suggested through the title and relational reference. 4) The title and relational reference regulates related terms that each relation type contains its field, according to each relational type, by reclassifying entire fields in order to provide direct bibliographic relation types on reference records. 5) Pointers which are connected to each access point present reference control numbers.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.4
• /
• pp.519-525
• /
• 2014

In this paper, an alternative variable structure controller is designed for the point-to-point regulation control of uncertain general linear plants so that the output of plants can be controlled from an arbitrarily given initial point to an arbitrarily given reference point in the state space. By using the error between the steady state value of the output and an arbitrarily given reference point and those integral, a transformed integral sliding surface is defined, in advance, as the surface from an initial state to an arbitrarily given reference point without the reaching phase problems. A corresponding control input is suggested to satisfy the existence condition of the sliding mode on the preselected transformed integral sliding surface against matched uncertainties and disturbances. Therefore, the output controlled by the proposed controller is completely robust and identical to that of the preselected transformed integral sliding surface. Through an example, the effectiveness of the suggested controller is verified.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.10
• /
• pp.1774-1779
• /
• 2016

This paper proposes a portable cable fault detection system with automatic fault distinction and distance measurement using time-frequency correlation and reference signal elimination method and automatic fault classification algorithm in order to have more accurate fault determination and location detection than conventional time domain refelectometry (TDR) system despite increased signal attenuation due to the long distance to cable fault location. The performance of the developed system method was validated via an experiment in the test field constructed for the standardized performance test of power cable fault location equipments. The performance evaluation showed that accuracy of the developed system is less than 1.34%. Also, an error of automatic fault type and location by detection of phase and peak value through elimination of the reference signal and normalization of correlation coefficient and automatic fault classification algorithm not occurred.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.1
• /
• pp.37-44
• /
• 1983

A class of adaptive control algorithms applied to discrete-time single-input single-output deterministic linear systems is analyzed by using direct model reference adaptive control. Controller parameters are identified with weighted least square Method. And computer simulations reveal that proposed weighted least square method in which the value of depends on the identification error can be used regardless of the sufficient condition of reference input signal.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.5
• /
• pp.442-449
• /
• 2003

This paper discusses how to generate the reference compensation voltages in Dynamic Voltage Restorers (DVR) by use of PQR instantaneous power theory. Sensed three-phase terminal voltages are transformed to PQR coordinates without time delay. Since the reference voltage in PQR coordinates is a single dc value, the voltage controller for DVRs is simple and easy to design. Proposed control method can be implemented by feedforward controllers or by feedback controllers. This paper verified the theory by a feedforward controller of a DVR with simulation and experiment.