• 대한임상검사과학회지
• /
• 제38권3호
• /
• pp.184-188
• /
• 2006

The purpose of the recovery experiment in clinical chemistry is performed to estimate proportional systematic error. We must know all measurements have some error margin in measuring analytical performance. Proportional systematic error is the type of error whose magnitude increases as the concentration of analyte increases. This error is often caused by a substance in the sample matrix that reacts with the sought for analyte and therefore competes with the analytical reagent. Recovery experiments, therefore, are used rather selectively and do not have a high priority when another analytical method is available for comparison purposes. They may still be useful to help understand the nature of any bias revealed in the comparison of kit experiments. Recovery should be expressed as a percentage because the experimental objective is to estimate proportional systematic error, which is a percentage type of error. Good recovery is 100.0%. The difference between 100 and the observed recovery(in percent) is the proportional systematic error. We calculated the amount of analyte added by multiplying the concentration of the analyte added solution by the dilution factor(mL standard)/(mL standard + mL specimen) and took the difference between the sample with addition and the sample with dilution. When making judgments on method performance, the observed that the errors should be compared to the defined allowable error. The average recovery needs to be converted to proportional error(100%/Recovery) and then compared to an analytical quality requirement expressed in percent. The results of recovery experiments were total protein(101.4%), albumin(97.4%), total bilirubin(104%), alkaline phosphatase(89.1%), aspartate aminotransferase(102.8), alanine aminotransferase(103.2), gamma glutamyl transpeptidase(97.6%), creatine kinase(105.4%), lactate dehydrogenase(95.9%), creatinine(103.1%), blood urea nitrogen(102.9%), uric acid(106.4%), total cholesterol(108.5), triglycerides(89.6%), glucose(93%), amylase(109.8), calcium(102.8), inorganic phosphorus(106.3%). We then compared the observed error to the amount of error allowable for the test. There were no items beyond the CLIA criterion for acceptable performance.

• 제어로봇시스템학회논문지
• /
• 제3권2호
• /
• pp.124-131
• /
• 1997

This paper presents a modified adaptive control scheme that improves the transient performance of the overall system while maintaining the asymptotic convergence of the output error. The proposed control scheme is characterized as the added outer dynamic feedback loop on the conventional adaptive control scheme. This control scheme enables various robust control methods that were developed for standard model reference adaptive controllers to be applied to the proposed controller. In contrast with the modified adaptive controllers that use augmented errors to provide additional dynamic feedback, the proposed controller uses tracking error directly, thereby reducing the tracking error significantly in the transient state and making the error insensitive to noise.

• 한국정보통신학회논문지
• /
• 제19권12호
• /
• pp.2805-2812
• /
• 2015

OFDM 시스템에서는 시변이며 주파수 선택적인 전송 채널을 추정하기 위하여 보통 기준 심볼을 이용한다. 우선 LTE 표준의 기준 심볼 배치를 이용하여 채널을 추정할 때의 LTE OFDM 시스템 비트 오류율 성능을 분석한다. 분석결과, LTE 표준 기준 심볼 배치 경우에 도플러 시변 페이딩에는 강인하나 주파수 선택적 페이딩에 대하여는 채널 추정 오차가 크게 되어 비트 오류율 성능 열화가 발생된다. 그러므로 본 논문에서 효율적이고 우수한 채널 추정을 위하여 등간격 다이아몬드 격자 모양의 기준 심볼 배치이며 주파수 영역에서 매 4번째 부반송파 간격마다 기준 심볼을 배치하는 개선된 기준 심볼 배치 모양을 새로이 제시한다.

• 한국정보통신학회논문지
• /
• 제20권9호
• /
• pp.1822-1829
• /
• 2016

GPS 항법의 정확도 향상과 무결성 정보의 필요성으로, 국내에 DGPS를 구축하였다. 최근에는 측위정보를 해양에서 뿐만 아니라 육상에서도 활용할 수 있도록 제공하고 있다. 그러나 2015년도 충주 기준국의 성능저하 문제점을 파악하기 위하여 영도기준국과 함께 가시성과 전파환경을 조사하였다. 영도기준국의 경우, 가시성과 전파환경이 기준국 기준에 만족하였다. 그러나 충주기준국의 경우, 가시성은 막음각 7도 이하로 장애물이 존재하여 만족하지만 전파환경에서 신호잡음은 최대 -50dBm으로 기준치인 -70dBm을 넘어가는 것을 확인하였다. 이러한 전파환경으로 인한 측정치오차를 분석하기 위하여 신호잡음등의 오차를 포함하지 않는 시차분 측정치 분석방법을 제안하였다. 2015년 12월 측정치 분석결과 충주 기준국의 경우 영도 기준국 보다 3배의 오차를 확인하였다. 이 뿐만 아니라 기준국 장비문제로 인한 측정치 성능저하를 확인하였다. 추후에는 17개소의 기준국의 측정치를 분석하여 성능검증을 진행할 예정이다.

• 한국통신학회논문지
• /
• 제28권11C호
• /
• pp.1130-1139
• /
• 2003

본 논문은 다차원(multi-hypothesis) 기법을 이용한 에러 은닉 알고리듬(error concealment algorithm)을 제안한다. 제안하는 알고리듬은 손실된 블록(block)을 보상하기 위해서, 이전 프레임에서 두 개 이상의 블록을 선택하여 각각에 가중치를 적용한 후. 중첩을 수행함으로써 손실된 블록을 보상한다. 참조되는 블록과 가중치 계수를 정하기 위해서 세 가지 방법을 제안한다. 이 방법들을 H.26L 동영상 표준에 기반 하여 구현하였으며. 각각의 성능은 모의 전산 실험을 통하여 비교되었다. 제안하는 다 차원 에러 은닉 기법은 기존의 한 개의 프레임만을 이용하는 방법에 비해서 약 1.5㏈의 PSNR 성능 향상이 있음을 확인한다.

• ETRI Journal
• /
• 제28권5호
• /
• pp.574-582
• /
• 2006

In this paper, a new error concealment algorithm is proposed for the H.264 standard. The algorithm consists of two processes. The first process uses a fuzzy logic method to select the size type of lost blocks. The motion vector of a lost block is calculated from the current frame, if the motion vectors of the neighboring blocks surrounding the lost block are discontinuous. Otherwise, the size type of the lost block can be determined from the preceding frame. The second process is an error concealment algorithm via a proposed adapted multiple-reference-frames selection for finding the lost motion vector. The adapted multiple-reference-frames selection is based on the motion estimation analysis of H.264 coding so that the number of searched frames can be reduced. Therefore the most accurate mode of the lost block can be determined with much less computation time in the selection of the lost motion vector. Experimental results show that the proposed algorithm achieves from 0.5 to 4.52 dB improvement when compared to the method in VM 9.0.

• Journal of Power Electronics
• /
• 제8권3호
• /
• pp.268-274
• /
• 2008

This paper presents a proposed position controller for a vector controlled induction motor. The position controller design depends on the rotational motion equations and a classical speed controller (CSC) performance. The CSC is designed to have the ability to track variable reference inputs and to provide a predefined system performance. Standard position controller in industry is presented to analyze its performance and its drawbacks. Then the proposed position controller is designed, based on the well defined rotational motion equations. The proposed position controller and the CSC are applied to control the position and speed of the vector controlled induction motor with different ratings. Simulation results at different operating conditions are presented to evaluate the proposed controllers' performance. The results show that the CSC can drive the motor with a predefined speed performance and can track a variable reference speed with an approximately zero steady state error. The results also show that the proposed position controller has the ability to effect high-precision positioning in a limited time and to track a variable reference position with a zero steady state error.

• 한국작물학회지
• /
• 제51권spc1호
• /
• pp.304-309
• /
• 2006

Near infrared reflectance spectroscopy (NIRS) was used to develop a rapid and nondestructive method for the determination of fatty acid composition in sesame (Sesamum indicum L.) seed oil. A total of ninety-three samples of intact seeds were scanned in the reflectance mode of a scanning monochromator, and reference values for fatty acid composition were measured by gas-liquid chromatography. Calibration equations were developed using modified partial least square regression with internal cross validation (n=63). The equations obtained had low standard errors of cross-validation and moderate $R^2$ (coefficient of determination in calibration). Prediction of an external validation set (n=30) showed significant correlation between reference values and NIRS estimated values based on the SEP (standard error of prediction), $r^2$ (coefficient of determination in prediction) and the ratio of standard deviation (SD) of reference data to SEP. The models developed in this study had relatively higher values (more than 2.0) of SD/SEP(C) for oleic and linoleic acid, having good correlation between reference and NIRS estimate. The results indicated that NIRS, a nondestructive screening method could be used to rapidly determine fatty acid composition in sesame seeds in the breeding programs for high quality sesame oil.

• 한국의류학회지
• /
• 제28권3_4호
• /
• pp.452-459
• /
• 2004

The purpose of this study was to evaluate the effect of reference fabric for the tactile sensation of worsted fabrics. As specimens, 32 worsted fabrics for spring/fall suits were selected. A series of subjective evaluation for roughness, harshness, coarseness, smoothness, warmth, bulkiness and softness were performed with 20 trained panels. The panels were selected by the test of consistency and trained for 3 weeks to enhance the reproducibility and consistency. Subjective evaluation was performed using 9 points Semantic Differential Scales with and without reference fabric. Results showed that the sensations were very similar between the results for the test of with or without reference. However the standard deviations of ratings for the with-reference were much less than that of without-reference which means the use of reference fabric can reduce the subjective error or can reduce the number of panels to test.

• 한국측량학회지
• /
• 제26권1호
• /
• pp.17-26
• /
• 2008

우리나라 1등 수준망은 1974년부터 1986년간 관측된 자료를 1987년 동시 조정된 바 있다. 이후, 국토지리정보원에서는 2001년부터 2006년까지 전자레벨과 바코드 함척을 이용하여 1등 수준망에 대한 직접수준측량 실시하였고, 본 연구는 이들 관측자료 분석 및 수준망 조정 결과이다. 우리나라 1등 수준망은 총 36개 노선으로 구성되어 있는데, 그 중 34노선이 11개 폐합 환을 구성한다. 1등 수준측량 관측자료 중 4개 노선은 1등 수준측량 허용 왕복차를 초과하였으며, 3개 수준환은 허용 환 폐합차를 초과하였다. 수준점간 왕복차의 표준오차(${\eta}_1$)는 $0.2{\sim}1.7mm/{\surd}km$, 환 폐합차의 표준오차(${\eta}_2$)는 $2.0mm/{\surd}km$로 IGA의 고정밀 수준측량기준을 충족하였다. 1등 수준망은 1점(수준원점) 고정방식에 의한 망조정이 수행되었으며, 기준 표준오차($\hat{{\sigma}_0}$)는 $1.8mm/{\surd}km$로, 1987년 1등 수준망 조정의 기준 표준오차($\hat{{\sigma}_0}$)보다 2배 향상된 결과이다.