• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집
• /
• pp.46-49
• /
• 2005

This paper presents the electrical characteristics of metal oxide varistors for lightning surge arresters. ZnO varistors were fabricated with typical ceramic production methods and two types of varistors were also prepared to be compared. The nominal discharge current and line discharge class of those varistors are $10kA(8/20{\mu}s)$ and class 3, respectively. The diameter of varistors manufactured and prepared were in the range of 61.6~65.0mm and the thickness of those were in the range of 27~42.52mm. The reference and residual voltage were tested and reference and residual voltage per 1mm and the ratio of reference and residual voltage were calculated. The reference voltage per 1mm of varistors manufactured was about 175V/mm but that of A's and B's varistors was nearly 200V/mm. The residual voltage exhibited the same trends as the reference voltage, so the reference and residual voltage per 1mm of domestic varistors should be increased. According to the results of tests, it is thought that if the reference and residual voltage per 1mm were increased to 200V/mm and 330V/mm, domestic ZnO varistors would be possible to apply to the station class arresters in the near future.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제24권1호
• /
• pp.1-9
• /
• 2018

LoRa는 최대 30km정도의 넓은 커버리지를 가지고 있어 장거리 위치 측위가 가능하다. 하지만 현재 LoRa환경에서의 위치 오차는 500m를 상회하고 있다. 이로 인하여 LoRa 환경에서 실질적인 위치 서비스를 상용화하기에는 어려움이 따른다. 본 논문에서는 LoRa 환경에서 각 구역별 레퍼런스 노드를 활용하여 모바일 노드에서 게이트웨이로 신호를 보낼 시 정확하지 않은 시각 오차를 보정하여 위치 정확도를 향상시키는 방안을 제안한다. 실험은 MATLAB으로 시뮬레이션을 하였고 Hata 모델을 사용하여 고정적인 noise는 상쇄하고 환경적인 noise 값을 고려하여 실험하였다. 실험 결과 레퍼런스 노드가 많을수록, 모바일 노드에서 레퍼런스 노드가 가까울수록 오차범위가 줄어 든 것을 확인할 수 있었다.

• 한국정보통신학회논문지
• /
• 제11권8호
• /
• pp.1544-1551
• /
• 2007

본 논문에서는 넓은 동작전압 범위와 저소비 전력 그리고 개선된 파워-업 특성을 가지는 캐스코드 전류 거울형 CMOS 밴드갭 기준전압 발생기의 스타트-업 회로를 제안하였다. 새롭게 제안된 스타트-업 회로는 기존의 스타트-업 회로에 비해 안정적인 파워-업 특성을 가지며 공급전압(VDDA)이 높아지더라도 밴드갭 기준전압 발생기 회로의 동작에 영향을 미치지 않는 것을 모의실험을 통하여 확인하였고 $0.18{\mu}m$ tripple-well CMOS 공정을 이용하여 테스트 칩을 제작하고 측정하였다. 측정 된 기준전압 Vref는 평균값이 738mV이고 $3{\sigma}$는 29.88mV이다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권1호
• /
• pp.70-79
• /
• 2016

This paper proposes a low-power range-scaled 14b 30 MS/s pipeline-SAR composite ADC for high-performance CIS applications. The SAR ADC is employed in the first stage to alleviate a sampling-time mismatch as observed in the conventional SHA-free architecture. A range-scaling technique processes a wide input range of 3.0VP-P without thick-gate-oxide transistors under a 1.8 V supply voltage. The first- and second-stage MDACs share a single amplifier to reduce power consumption and chip area. Moreover, two separate reference voltage drivers for the first-stage SAR ADC and the remaining pipeline stages reduce a reference voltage disturbance caused by the high-speed switching noise from the SAR ADC. The measured DNL and INL of the prototype ADC in a $0.18{\mu}m$ CMOS are within 0.88 LSB and 3.28 LSB, respectively. The ADC shows a maximum SNDR of 65.4 dB and SFDR of 78.9 dB at 30 MS/s, respectively. The ADC with an active die area of $1.43mm^2$ consumes 20.5 mW at a 1.8 V supply voltage and 30 MS/s, which corresponds to a figure-of-merit (FOM) of 0.45 pJ/conversion-step.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1211-1215
• /
• 2003

Accurate mathematical models of spacecraft components are an essential of spacecraft attitude control system design, analysis and simulation. Gyro is one of the most important spacecraft components used for attitude propagation and control. Gyro errors may seriously degrade the accuracy of the calculated spacecraft angular rate and of attitude estimates due to inherent drift and bias errors. In order to validate this model, nominal case simulation has been performed and compared for the low range mode and high range mode, respectively. In this paper, a mathematical model of gyro containing the relationships for predicting spacecraft angular rate and disturbances is proposed.

• 전력전자학회논문지
• /
• 제13권1호
• /
• pp.22-32
• /
• 2008

본 논문에서는 전철 구동용 견인 전동기의 구동을 위한 과변조 영역에서의 NPC형 3-레벨 인버터의 출력전압 선형화 기법을 제안한다. 과변조 영역은 Modulation Index: MI에 따라서 2가지 모드로 나누었으며 과변조영역 I에서는 퓨리에 시리즈를 통한 기본파성분의 크기로 유도된 reference angle을 사용하였다. 과변조영역 II에서는 과변조영역 I과 같은 방법으로 holding angle을 구하여 사용하였다. 이 두 가지 과변조기법을 통하여 PWM 인버터 출력전압을 1펄스 모드까지 선형적으로 획득할 수 있다.

• 제어로봇시스템학회논문지
• /
• 제19권7호
• /
• pp.633-639
• /
• 2013

Several estimation methods used in the range measurement based wireless localization area have individual problems. These problems may not occur according to certain application areas. However, these problems may give rise to serious problems in particular applications. In this paper, three methods, ILS (Iterative Least Squares), DS (Direct Solution), and DSRM (Difference of Squared Range Measurements) methods are considered. Problems that can occur in these methods are defined and a simple hybrid solution is presented to solve them. The ILS method is the most frequently used method in wireless localization and has local minimum problems and a large computational burden compared with closed-form solutions. The DS method requires less processing time than the ILS method. However, a solution for this method may include a complex number caused by the relations between the location of reference nodes and range measurement errors. In the near-field region of the complex solution, large estimation errors occur. In the DSRM method, large measurement errors occur when the mobile node is far from the reference nodes due to the combination of range measurement error and range data. This creates the problem of large localization errors. In this paper, these problems are defined and a hybrid localization method is presented to avoid them by integrating the DS and DSRM methods. The defined problems are confirmed and the performance of the presented method is verified by a Monte-Carlo simulation.

• 한국해양공학회지
• /
• 제22권4호
• /
• pp.106-113
• /
• 2008

This paper presents an underwater navigation system based on range measurements from a known reference station fixed on the sea bottom or floated at surface with a buoy, for which the system is extended to 3-dimensional coordinates. We formulated a state equation in polar coordinates and constituted an extended Kalman filter for discrete-time implementation of the navigation algorithm. The autonomous underwater vehicle, lSiMl, cruising with a constant speed can estimate its trajectory using just range measurements and additional depth, heading and pitch sensors. Simulation studies were performed to evaluate the underwater navigation of the maneuvering AUV with range measurements. We modulated the sample rate of range measurements to evaluate the effect of the update rate, and changed the initial position error of the AUV to check the robustness to estimation errors. Simulation results illustrates that the extended navigation system provides convergence of the state estimates. The navigation system was conditionally stable when it had initial position errors.

• 대한의생명과학회지
• /
• 제12권3호
• /
• pp.197-200
• /
• 2006

We analyzed total protein (TP), albumin (AL), aspartic aminotransferase (AST), alanine aminotransferase (ALT), urea nitrogen (UN), creatinine (CRE) and serum protein electrophoretic fractions in sera of rural elderly patients to evaluate the health status in rural elderly patients. We observed that the frequencies of patients showed lower level of total protein, albumin, and both total protein and albumin than them of reference range were 20.3%, 22.8% and 19.0%, respectively. The rates of patients showed higher level of AST, ALT, both of AST and ALT, UN, creatinine and both of UN and creatinine than them of reference range were 33.8%, 40.0%, 30.0%, 17.7%, 15.2% and 7.9%, respectively. Comparison of protein fractions of each patient to reference range showed that 77.2% of patients showed normal in all of patterns. Few of patients showed abnormal pattern in albumin (13.6%), ${\alpha}1-globulin (0.0%),\;{\alpha}_2-g10bulin(1.1%),\;{\beta}-globulin(1.9%)\;and\;{\gamma}-globulin(6.2%)$. These data suggest that many of rural elderly patients may suffer from heart, liver and kidney diseases. The serum protein fractions are not typical criterion to evaluate the disease, but production of proteins in rural elderly patients may be affected by liver disease and kidney disease.

• 한국전기전자재료학회논문지
• /
• 제19권11호
• /
• pp.1061-1066
• /
• 2006

This paper presents the electrical characteristics with manufacturing process and performance evaluation of high performance zinc oxide varistors. ZnO varistors were fabricated with typical ceramic production methods with different thickness and the structural and electrical characteristics of ZnO varistors were investigated. All varistors exhibited high density, which was in the range of $5.41{\sim}5.49g/cm^3$. In the electrical properties, the reference voltage increased in the range of $4.410{\sim}5.250kV$ with increasing their thickness and the residual voltage exhibited the same trends as the reference voltage. In the long duration current impulse withstand test, E-2 and F-1 samples failed at the two and four shots of impulse current, respectively, but E-1 and F-2 samples survived 18 shots during the test. Before and after this test, the variation ratio of residual voltage of E-1 and F-2 samples were -0.34 % and 0.05 %, respectively, which were in the acceptance range of 5 %. According to the results of tests, it is thought that if the fabrication process such as insulating coating, sintering condition, and soldering method is improved, these ZnO varistors would be possible to apply to the station class arresters in the near future.