• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.62-73
• /
• 2008

In this paper, domestic standard revision plan of dynamic frequency method which is used both in unmanned automatic toll collection system and manned collection system of the express highway is presented. For such ETCS, the infrared rays (870 nm) of active frequency method and the frequency integrated method (5.8 GHz) are adopted and extended to be operated to the all around the Toll Gate. This standardization plan is based on inter connection reference model between OSI (Open System Interconnection) in process of ITS short range radio communication standardization of 5.8 GHz bandwidth to support traffic information and control system service, and the derived revision plan by starting from physical layer which support interoperability for multiple access between RSE (Road Side Equipment) and OBE (On Board Equipment), in which is categorized into physical layer, data link layer, and application layer. In case of radiation power, existing standard is divided by class1 (within 10 m) and Class2 (within 100 m) according to transmission lengthwhile it is operated with just single standard 'Class1' because of notification of Ministry of Information and Communication in 2004. In the case of the limitation value of incident power in communication area, considering operation plan of ETCS that is on actuality operation the measurements are reflected to the standard. In other wort this paper proposed the improvement standard of incident power, pseudo response in the communication area and radiated power in order to secure stability and compatibility among operator systems about the needed part on ETCS operation.

• The Journal of the Korea Contents Association
• /
• v.17 no.12
• /
• pp.1-10
• /
• 2017

Open data has received a lot of attention from around the world. The Korean government is also making efforts to open government data. However, despite the quantitative increase in public data, the lack of data is still pointed out. This paper proposes a method to improve data sharing and utilization by semantically linking public data. First, we propose a knowledge model for expressing administrative districts and their semantic relationships in Korea. An administrative district is an administrative unit that divides the territory of a nation, which is a unit of politics, according to the purpose of the state administration. The knowledge model of the administrative district defines the structure of the administrative district system and the relationship between administrative units based on the Local Autonomy Act. Second, a knowledge graph of the administrative districts is introduced. As a reference information to link public open data at a semantic level, some characteristics of a knowledge graph of administrative districts and methods for linking heterogeneous public open data and improving data quality are addressed. Finally, some use cases are addressed for interlinking between the knowledge graph of the administrative districts and public open data. In particular, national administrative organisations are interlinked with the knowledge graph, and it demonstrates how the knowledge graph can be utilised for improving data identification and data quality.

• Spatial Information Research
• /
• v.22 no.1
• /
• pp.65-73
• /
• 2014

Recently indoor navigation with indoor map such as Indoor Google Maps is served. For the services, constructing indoor data are required. CityGML and IFC are widely used as standards for representing indoor data. The data models contains spatial information for the indoor visualization and analysis, but indoor navigation requires semantic and topological information like graph as well as geometry. For this reason, IndoorGML, which is a GML3 application schema and data model for representation, storage and exchange of indoor geoinformation, is under standardization of OGC. IndoorGML can directly describe geometric property and refer elements in external documents. Because a lot of data in CityGML or IFC have been constructed, a huge amount of construction time and cost for IndoorGML data will be reduced if CityGML can help generate data in IndoorGML. Thus, this paper suggest practical use of CityGML including deriving from and link to CityGML. We analyze relationships between IndoorGML and CityGML. In this paper, issues and solutions for linkage of IndoorGML and CityGML are addressed.

• Journal of Wetlands Research
• /
• v.19 no.1
• /
• pp.144-154
• /
• 2017

The riparian vegetation is one of corridor type ecosystems, an ecotone and able to improve the ecological soundness by structural and functional link. And they act as habitats, sources and sinks of species, conduits, filters and barriers. This study was carried out to develop the vegetation model for the fluctuation areas of lake reservoirs consider of hydrologic and soil environments according to the vegetation structure of the reference ecosystem. To develop the case study, 2 sites within 10degree slope of the Daecheong Lake were selected. The riparian vegetation models were built by the results of GIS analysis, remote satellite analysis, field survey results, consider of water level, flooded frequency, soil and topographic index, land cover or land use etc. 1) study area varied from FWL to -5m of NFWL, 2) slope 10% below, 3) vegetations flooded below 100days yearly are Salix koreensis, Salix chaenomeloides, Salix gracilistyla, 4)land cover type classified wildlife grassland, abandoned paddy field, cropland according to landuse (or landcover), 5)finally model was constructed as ecological landscape forest. The model designs were suggested by 2 types in Daecheong lake reservoir. The model for the riparian vegetation corridors could be the basic and useful data to improve the ecological and landscape properties.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.4
• /
• pp.46-59
• /
• 2007

Urban infrastructure is a core of urban growth management which concerns with location, time and costs of development. Despite an inevitable link between development density and infrastructure capacity in urban areas, little study have been performed. For this reason, development activities are undergone without any clear evidence or analysis. The main purposes of this paper are to build subject maps of urban infrastructure capacity which illustrate the level of education service and road capacity, and to give reference standard for development decision at given location. For these purposes, the case study of the high-rise multi-purpose buildings in Daegu metropolitan city is performed. The main findings are follows. First, road ratio is high in the CBD and its surrounding areas as well as rural area, and low in areas of manufacturing, parks and military use. Second, educational facility, represented by the number of student per classroom of elementary school, is fairly abundant across the city, especially in the CBD and rural areas. Third, the high-rise multi-purpose buildings have been built in population-losing infrastructure-abundant areas, in general. Based on these results, this study concludes that the high-rise multi-purpose buildings may induce population-inflow and have low possibility to bring about overly dense developments.

• Journal of Korean Society of Transportation
• /
• v.32 no.6
• /
• pp.567-578
• /
• 2014

The study suggested a method to improve analysis accuracy such that the interactive effects of transportation changes between outside and inside of sub-areas were sequentially considered in the analysis by linking a macroscopic network analysis and a microscopic traffic simulation. A dynamic O/D estimation method was developed for practical implement of sub-area microscopic simulation analysis by using the results of macroscopic network analysis, the results of selected link analysis at the cordon line of the sub-area, departure time data of household travel survey, timely observed traffic volume data at the cordon. This estimated dynamic O/D for the sub-area made it possible to analyze traffic phenomena in details. Various detailed phenomena such as traffic queues, delay at intersection, and conflicts between vehicles, which is impossible to be grasped through a macroscopic analysis, can be analyzed with the dynamic microscopic traffic analysis. Through implementing an empirical study and validation, the study provided a reference result about accuracy of a microscopic traffic simulation of a sub-area to help its application for real transportation policy analysis.

• The Korean Journal of Health Service Management
• /
• v.1 no.1
• /
• pp.110-124
• /
• 2007

Currently, we have seen sudden increase of demand for emergency medical services by reason for high-speed economic development increase of traffics, etc. in this society. Consequently the government enforced & operated emergency medical system in 1991 as a link of more positive countermeasure against it, but many problem; still remain in reality. In particular, the regional emergency medical center designated by the Ministry of Health and Welfare falls short of our expectations for its essential role by the reason of such as insufficiency in professional manpower and institutions concerned in small-scale hospital, matters with transportation system, preference of large hospital, etc. Therefore, this study was conducted grasp for the actual conditions of emergency medical system based upon literature research & the preceding studies and interview research the motive of coming hospital, satisfaction & understand to the subject of 150 persons of patients and their guardians who used regional emergency center of Pusan National University Hospital, thereby examining & analysing the cause of emergency room overcrowding by non-emergency cases, one of the problem; enumerated from preceding studies. The main result of this study is as follows. First the actual condition of non-emergency patients coming hospital for examining overcrowding of emergency medical center showed that, of the patients who used the emergency medical center, non-emergency patients accounted for 49.3%, which acted as the main cause of delaying medical care for emergency cases, cases of which medical person or first-aid man decided to come hospital accounted for 36.1 %, thereby suggesting essential need for re-education & wide public information to even the professional manpower besides patients & guardians for their using emergency medical system. Second, as the result of researching patient acknowledgement with reference to their using emergency medical center, the rate of their giving right answer is no more than 60%, which means that non-emergency cases' using as such is due to the shortage of their knowledge of the said emergency medical center, which suggests us that wider P.R for emergency medical system to common people who may be one of the patients of it at any time is still in need. Third, the result of researching for finding out a future remedy of emergency medical system showed that the users who know well of the way of using emergency medical center had relatively high satisfaction of it, ones who have lesser knowledge of it lower satisfaction and users who feel in need of emergency specialized manpower feel the necessity of public information of emergency medical information center(1339) at the same time. The finding of examining the subject of study, in conclusion, showed that the degree of the patients & their guardians' understanding of emergency medical system is lower and the medical persons concerned also had no distinct difference in their understanding of it from the common people's, which suggests us for extensive enforcement of systematic education and public information in aspect of the government via various media for the purpose of effective operation of emergency medical center.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.4
• /
• pp.58-67
• /
• 2014

The proportion of investment in national R&D projects in construction and transportation has been increasing continuously; in terms of the size of R&D projects, there are many medium- to large-sized projects of over KRW 10 billion. However, in spite of such continuous increase in R&D investments, there are many technologies developed but not commercialized, i.e., the quiescence of technology. Accordingly, it is necessary to link the R&D results to commercialization by expanding the scope of R&D projects. In this context, this study presented objective reference prices to be used in contracting/transacting technology and implementing commercialization strategy by conducting technology valuations against on-going research projects with earnings approach, and by estimating value of patented technology. Sum of free cash flow (business value) that can be generated during the life of the technology was estimated as KRW 512 million by reflecting a discount rate of 16.34% to convert it into the present value. In addition, the technology value was computed as KRW 227million by applying a technology factor of 44.39% to the above value. Based on the technology value estimated in this way, it is necessary to establish industrialization and commercialization strategy of the technology.

• Journal of Korean Society of Transportation
• /
• v.19 no.1
• /
• pp.29-52
• /
• 2001

The purpose of this paper is to pursue a case study of urban land use and transportation linkage policies based on a British city of Cardiff, Wales. To this end, the paper combines a review and synthesis of available land use and transportation planning sources, and a series of interviews with planners and a extensive survey of planning policy documents to assess the effectiveness of policy instruments in the city context. Considerable emphasis is placed on the analysis of the British land use and transportation planning in terms of the Policy guidance notes 11, 12 and 13 as well as the local transport policy guidance. The paper highlights the fact that the Cardiff unitary development plan and the local transport plan form a policy framework of integrating land use and transportation planning process, employing travel demand management schemes and implementing the various strategy components on the overall aim of achieving and maintaining a sustainable city.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.6
• /
• pp.782-792
• /
• 1999

효과적인 ATM 망의 관리는 연결 지향 환경, 다양한 서비스 등급, 대규모 트래픽, 가상 망 구성 그리고 여러가지 트래픽 유형 등과 같은 다양한 ATM 특성을 다룰 수 있어야만 한다. 이를 위해 ATM 포럼에서는 ATM 장치, 사설망, 공중망 및 그들간의 상호작용을 지원하기 위한 ATM 망 관리 참조 모델을 정의하였으며, 그 중 하나가 서로 다른 판매자로부터의 ATM 장비들간의 상호동작성을 보장하기 위해 SNMP 기반 망 관리 프로토콜을 통해 상호 연결된 인터페이스를 관리할 수 있도록 정의된 통합 지역 관리 인터페이스(ILMI) 프로토콜이다. ILMI의 목적은 두 인접한 ATM 장치로 하여금 그들 간에 공통의 ATM 링크에 대한 동작 파라메타를 자동적으로 구성할 수 있도록 함으로서, 관리자에 의해 수동 구성이 아닌 ATM 장치 상호간의 플러그 앤 플러그 기능을 지원하는데 있다. 본 논문에서는 이러한 ILMI 기술을 바탕으로 공중망 ATM 교환기에 연결된 가입자의 물리 인터페이스, ATM 계층 인터페이스, VPC 및 VCC의 구성 및 상태 정보를 효율적으로 관리하며, 가입자 시스템의 ATM 주소를 자동으로 등록, 관리할 수 있도록 하는 가입자 인터페이스 관리 시스템(SIMS)을 설계하고, 구현하였다. Abstract An effective ATM management must address the various features of ATM such as connection-oriented environment, varying class of service, large scale traffic, virtual network configurations and, and multiple traffic types. For this, ATM network management reference model defined by ATM Forum describes the various types of network management needed to support ATM devices, private networks, public networks, and the interaction between them. One of these types is Integrated Local Management Interface (ILMI) defined to manage interconnected interface through SNMP-based network management protocol for ensuring the interoperability of ATM devices from different vendors. The purpose of ILMI is to enable two adjacent ATM devices to automatically configure the operation parameters of the common ATM link between them and then to provide a Plug and Plug function to any ATM devices with not a passive configuration by manager but a automatic configuration. This paper design and implement a Subscriber Interface Management System (SIMS) which provide automatic registration and management of ATM address of subscriber system and efficiently manages physical interface of subscriber who is connected to public ATM switch, ATM layer interface, configuration information and status information of VPC and VCC.