• Journal of Power System Engineering
• /
• v.11 no.3
• /
• pp.66-72
• /
• 2007

This study proposed new method to decide the reference model necessary for design PID controller. In generally, control design problems using the reference model have the following two factors. One factor is that numerical model of the controlled system can be obtained extremely, and the other is that specification for the closed-loop dynamic performance is pure moderate. Therefore, the control design procedure is essentially based on the partial reference model matching which offers a reasonable method to simplify the design and the controller configuration under the controlled system uncertainty. ITAE(Integral of time-multiplied absolute error) performance index and Kitamori method etc. which were used a reference model method had a limit to settling time and rising time of reference model that it arrived to steady state response according to the controlled system. On this study, if it only knew peak time of overshoot and settling time by measurement signal of the controlled system, it can be made the reference model easily. We proposed new method to improve performance index of the reference model superior to existing reference model index and illustrate the numerical simulation results to show the effectiveness of proposed control method design.

• Journal of the Korean Society for information Management
• /
• v.22 no.2 s.56
• /
• pp.23-39
• /
• 2005

The purpose of this study was to analyzes the present conditions of reference databases which is constructed from Korea. The object which is used in analysis concludes on KSCI( Korean Science Citation Index) of KISTI, KCI(Korean Citation Index) of KRF, KoMCI(Korean Medical Citation Index) of Korean Academy of Medical Sciences, and reference database of KOSEF. And then, this paper proposes the activation plan for reference database construction based on this analysis result. The proposed plan will be able to apply with fundamental data of the system, policy and technical direction for reference database construction.

• Journal of Acupuncture Research
• /
• v.28 no.3
• /
• pp.121-129
• /
• 2011

Objectives : This study was to propose how to translate journal references into english for enhancing citation index of the journals published in the Korean Oriental Medical Society. Methods : Journal reference is mainly composed of author name, title or book name, journal name such as Index Medicus or publisher name, etc. In order to find the appropriate equivalents to the above major constituents, head words extracted from all the references of Journal of Korean Oriental Medical Society published in 2002 to 2009. A plan for English translation of the journal reference was formulated and the glossary was prepared. Plan for English translation of the journal reference : 1. Author: Author name was represented as capitalized last name and two initials of first name and listed up to six. If there are more, the first three or six authors were listed with 'et al'. 2. Terminology of traditional Korean medicine: Standard korean traditional medical terminology was one of the current representative dictionary with as much as 6040 headwords, which was needed to be translated into English in order to provide substantial equivalents available for English translation of journal reference. Therefor 4361 english equivalents were to be newly adopted except for 1679 overlapped with them in WHO-IST. Source oriented translation and target oriented translation were allowed to be appropriately selected depending on the condition. In addition, principle of English translation of acupoint,medicinal Herbs, Herbal formula and classical works were proposed. 3. Basically the names of journals should be set in italics and abbreviated according to the List of journals indexed for medline (formerly Index Medicus) published by the National Library of Medicine. however, abbreviation of korean oriental medical journals were not yet established. Thus establishment of tentative korean index medicus should be considered. Conclusions : For the enhancement of journal citation index of korean traditional medical journals, it was suggested that english translation of journal reference should be one of the alternatives enhancing citation rate.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.2
• /
• pp.128-136
• /
• 2011

Purpose: Errors in orthognathic model surgery occur during the planning, measuring and/or moving of the models. However, there has been little effort to find ways to reduce these errors. In this study, we introduce a new orthognathic model surgery technique (Yonsei method) which adopts the tooth point as the reference and the occlusal index as a moving vehicle for the model. Methods: The technique consists mainly of: 1) measuring the three-dimensional lengths of model points, 2) fabricating and moving the occlusal index and 3) verifying the movement. Then we compared the accuracy of the Yonsei method to conventional methods, with special reference made to influencing factors. Results: Errors for the Yonsei method with the occlusal index were reduced to the range of 0.61~1.04 mm in three-dimension, providing a more accurate model surgery technique than conventional methods which have errors ranging from 0.77~3.11 mm. Conclusion: It provided us a more accurate model surgery technique based on the reference points onto the teeth and the use of occlusal index.

• Korean Journal of Veterinary Research
• /
• v.44 no.4
• /
• pp.649-653
• /
• 2004

To estimate the source of variance components for some hematological parameters and assess the utility of the conventional population-based reference interval, this study computed index of individuality for blood samples, which were from 13 dogs drawn once weekly for 4 consecutive weeks. Results were subjected to nested analysis of variance. For all parameters measured between-dog variations were greater than within-dog variation. Except for the parameters RBC and MCHC the index of individuality was <1.4. The low reliability coefficient and high index of individuality of ${\leq}0.8$ were found for the majority of hematological parameters. In practical term, the present study indicated that use of hemogram profiles alone in the evaluating clinical state of a single patient should be avoided because of their physiological or natural random variations, and that comparing a single measurement on the blood analytes from an individual dog to the conventional population-based reference range may be too insensitive to detect any significant changes in the blood components of that particular dog. A single measurement may not characterize an individual's average concentration of the parameters even shortterm period.

• ETRI Journal
• /
• v.36 no.1
• /
• pp.179-182
• /
• 2014

This letter presents a very simple yet very effective solution for fast reference frame (RF) selection in H.264/AVC. By efficiently making use of the correlation between the best RF indices in various inter modes, the proposed method significantly reduces the number of RFs to be examined at the expense of a very small miss rate. Simulation results show that the proposed method not only improves upon the coding performance of conventional methods but also reduces the encoding time significantly.

• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.375-383
• /
• 2018

In order to apply the Network RTK (real time kinematics) technology, which has been used for positioning of stationary points, to the navigation of vehicles, its infrastructure should provide correction data with a quality indicator that can show the expected accuracy in real time. In this paper, we analyzed various indicator generation algorithms such as I95 (ionospheric index 95) / G95 (geodetic index 95), SBI (semivariance based index) and RIU (residual interpolation uncertainty). We also applied them to the raw observables from the reference stations of National Geographic Information Institute and VRS (virtual reference station) users, and then examined its feasibility to be used as a real-time performance index of the Network RTK rover. 24 hour data analysis shows that the RIU index, which can represent the non-linearty of the correction, has the strongest correlation with the Network RTK rover accuracy. Therefore, RIU index is expected to be used as a real-time performance index of the Network RTK rover.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.11
• /
• pp.2945-2965
• /
• 2023

The laser inertial measurement unit is a precision device widely used in rocket navigation system and other equipment, and its quality is directly related to navigation accuracy. In the quality evaluation of laser inertial measurement unit, there is inevitably uncertainty in the index input information. First, the input numerical information is in interval form. Second, the index input grade and the quality evaluation result grade are given according to different national standards. So, it is a key step to transform the interval information input by the index into the data form consistent with the evaluation result grade. In the case of uncertain input, this paper puts forward a method based on probability distribution to solve the problem of asymmetry between the reference grade given by the index and the evaluation result grade when evaluating the quality of laser inertial measurement unit. By mapping the numerical relationship between the designated reference level and the evaluation reference level of the index information under different distributions, the index evidence symmetrical with the evaluation reference level is given. After the uncertain input information is transformed into evidence of interval degree distribution by this method, the information fusion of interval degree distribution evidence is carried out by interval evidential reasoning algorithm, and the evaluation result is obtained by projection covariance matrix adaptive evolution strategy optimization. Taking a five-meter redundant laser inertial measurement unit as an example, the applicability and effectiveness of this method are verified.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.2
• /
• pp.399-407
• /
• 1996

A fuzzy learning algorithm to get the optimal fuzzy rules is presented in this paper. The algorithm introduces a reference model to generate a desired output and a performance index funtion instead of the performance index table. The performance index funtion is a cost function based on the error and error-rate between the reference and plant output. The cost function is minimized by a gradient method and the control input is also updated. In this case, the control rules which generate the desired response can be obtained by changing the portion of the error-rate in the cost funtion. In SISO(Single-Input Single- Output)plant, only by the learning delay, it is possible to experss the plant model and to get the desired control rules. In the long run, this algorithm gives us the good control rules with a minimal amount of prior informaiton about the environment.

• Journal of radiological science and technology
• /
• v.41 no.1
• /
• pp.13-24
• /
• 2018

Liver size is an important component in the diagnosis and follow-up of diffuse liver disease when testing for liver disease using ultrasonography. However, difficulties lies in determining the presence of hepatomegaly and liver atrophy because the method used for measuring liver size differs from one examiner to another and there is no relevant standard based on body build. The present study aims to propose a more objective method for liver size measurement and a reference range based on body build. A total of 260 normal adults (130 males, 130 females) participated in the study. Ultrasonography was performed in all participants to measure the size of the right lobe, left lobe, quadrate lobe, and caudate lobe of liver. Based on Physique Index(PI), a value derived from multiplying weight(kg) by height($m^2$), size of physique was divided into three groups including Group I with PI<150, Group II with $150{\leq}PI{\leq}250$, and Group III with PI>250. Thus, mean liver size by PI and a reference range with 95% reliability were suggested. The superoinferior diameter of right lobe was $12.34{\pm}1.18cm$ in males and $11.07{\pm}0.93cm$ in females, and its reference range was 10.64~11.0cm for Group I, 11.78~12.12cm for Group II, and 13.02~13.84cm for Group III. The anteroposterior diameter(T) of left lobe was $5.93{\pm}1.09cm$ in males and $5.18{\pm}0.99cm$ in females, and its reference range was 4.77~5.17cm for Group I, 5.49~5.79cm for Group II, and 6.68~7.44cm for Group III. The transverse diameter was $3.51{\pm}0.60cm$ in male participants and $3.42{\pm}0.49cm$ in female participants and its reference range was 3.29~3.51cm for Group I, 3.36~3.55cm for Group II, and 3.52~4.0cm for Group III. The caudate lobe index was $11.65{\pm}2.88cm^2$ in males and $9.62{\pm}2.18cm^2$ in females and its reference range was $8.83{\sim}9.75cm^2$ for Group I, $10.62{\sim}11.47cm^2$ for Group II, and $11.89{\sim}14.26cm^2$ for Group III. As a basic measurement method of liver size, the present study suggests measuring the superoinferior diameter for right liver lobe, the anteroposterior diameter for left liver lobe, the transverse diameter for quadrate lobe, and the caudate lobe index for caudate lobe. It is expected that this method along with its relevant reference range can be used as useful indicators in determining hepatomegaly and liver atrophy upon the diagnosis and follow-up testing of diffuse liver disease.