• Smart Structures and Systems
• /
• v.20 no.1
• /
• pp.53-60
• /
• 2017

Reinforced concrete shear wall is one of the most common structural forms for high-rise buildings, and seismic energy dissipation techniques, which are effective means to control structural vibration response, are being increasingly used in engineering. Reinforced concrete-mild steel damper stiffness-tandem energy dissipation coupling beams are a new technology being gradually adopted by more construction projects since being proposed. Research on this technology is somewhat deficient, and this paper investigates design principles and methods for two types of mild steel dampers commonly used for energy dissipation coupling beams. Based on the conception design of R.C. shear wall structure and mechanics principle, the basic design theories and analytic expressions for the related optimization parameters of dampers at elastic stage, yield stage, and limit state are derived. The outcomes provide technical support and reference for application and promotion of reinforced concrete-mild steel damper stiffness-tandem energy dissipation coupling beam in engineering practice.

• Journal of Energy Engineering
• /
• v.12 no.4
• /
• pp.281-288
• /
• 2003

The MATRA-LMR code has been developed based on a subchannel analysis method for LMR (Liquid Metal Reactor) core subassembly thermal hydraulic design and analysis. The code was improved to allow a seven assembly calculation and can account for inter-assembly heat transfer based on a lumped parameter model. This paper describes the main modifications and improvements of the code and shows reference calculation results which compared single assembly calculation with seven assembly calculation cased for driver and blanket subassemblies of the KALIMER 150 MWe breakeven conceptual design core. KAL- IMER is a pool-type sodium cooled reactor with a thermal output of 392.0 MWth, which have inherently safe, environmentally friendly, proliferation-resistant and economically viable reactor concepts.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.627-632
• /
• 1998

Using an ammonium oxalate-ammonium sulfate electrolyte, a simple, quantitative, and fast technique for preparing sources for analytical alpha spectrometry was developed. To determine the optimum conditions for plating plutonium, parameters such as current density .and pH of electrolyte affacting the electrodeposition of the plutonium have been investigated. An optimized electrodeposition step for the determination of plutonium has been validated with a result of application to IAEA-Reference Soils. The new method of fallout Pu determination has been applied to environmental samples such as soil, sediment and moss samples in Korea.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.107-112
• /
• 2005

Recently proposed stable teleoperation control scheme, base on time domain passivity, is modified to remove several conservatisms. During unconstrained motion and contacting with soft and deformable environments, the two-port time domain passivity approach [21] was excessively dissipating energy even though it was stable without any energy dissipation. The main reason of this conservatism is on the fact that the time domain passivity controller does not include the external energy dissipation elements at the slave manipulator. The measured interaction force between slave and environment allow the time domain passivity observer to include the amount of energy dissipation of the slave manipulator to the monitored energy. With the modified passivity observer, reference energy following idea [24] is applied to satisfy the passivity condition. The feasibility of the developed methods is proved with experiments. Improved performance is obtained in unconstrained motion and contacting with a soft environment.

• Journal of Radiation Protection and Research
• /
• v.28 no.4
• /
• pp.349-351
• /
• 2003

To ensure the safety of the currently operating nuclear power plant, the Periodic Safety Review program has been conducted. In PSR program, the cumulative behavior of the radionuclide that might be released from the power plant is addressed. The Cs-137 in soil around Kori nuclear power plant was investigated. The soil sample was analyzed and compared with the reference area. The model calculation explained the depth profile of Cs-137.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1182-1187
• /
• 2014

This paper proposes an energy management strategy and adaptive control for superconducting magnetic energy storage (SMES) in a distribution power system with a grid-connected photovoltaic (PV) farm. Application of the SMES system can decrease the output power fluctuations of PV system effectively. Also, it can control the real and reactive powers corresponding to the scheduled reference values with adequate converter capacity, which are required at a steady-state operating point. Therefore, the adaptive control strategy for SMES plays a key role in improving the system stability when the PV generation causes uncertain variations due to weather conditions. The performance of proposed energy management strategy and control method for the SMES is then evaluated with several case studies based on the PSCAD/EMTDC$^{(R)}$ simulation.

• Journal of Power Electronics
• /
• v.12 no.6
• /
• pp.954-959
• /
• 2012

A hybrid switch that uses a microelectromechanical system (MEMS) switch as a gate driver of a MOSFET is applied to an energy harvesting system. The power management circuit adopting the hybrid switch provides ultralow leakage, self-referencing, and high current handling capability. Measurements show that solar energy harvester circuit utilizing the MEMS-MOSFET hybrid switch accumulates energy and charges a battery or drive a resistive load without any constant power supply and reference voltage. The leakage current during energy accumulation is less than 10 pA. The power management circuit adopting the proposed hybrid switch is believed to be an ideal solution to self-powered wireless sensor nodes in smart grid systems.

• Nuclear Engineering and Technology
• /
• v.49 no.6
• /
• pp.1354-1357
• /
• 2017

Characterization of special nuclear material may be performed using energy spectroscopy of either the neutron or gamma-ray emissions from the sample. Gamma-ray spectroscopy can be performed relatively easily using high-resolution semiconductors such as high-purity germanium. Neutron spectroscopy, by contrast, is a complex inverse problem. Here, results are presented for $^{252}Cf$ and PuBe energy spectra unfolded using a single EJ309 organic scintillator; excellent agreement is observed with the reference spectra. Neutron energy spectroscopy is also possible using a two-plane detector array, whereby time-of-flight kinematics can be used. With this system, energy spectra can also be obtained as a function of position. Spatial-dependent energy spectra are presented for neutron and gamma-ray sources that are in excellent agreement with expectations.

• Nuclear Engineering and Technology
• /
• v.37 no.1
• /
• pp.101-108
• /
• 2005

The neutron induced nuclear cross-section data for Pd-105, Ag-109, Xe-131, and Cs-133 were calculated and evaluated from an unresolved energy to 20 MeV. The energy dependent optical model potential parameters were extracted based on recent experimental data and applied up to 20 MeV. A spherical optical model and a statistical model for the equilibrium energy, and a multistep direct and a multistep compound model for the pre-equilibrium energy were used in the calculation. The direct capture model was recently introduced for fast neutron capture. The theoretically calculated cross-sections were compared with the experimental data and the evaluated files. The total and capture cross-sections calculated using the model were in good agreement with the reference experimental data. The evaluated cross-section results were compiled in ENDF-6 format and merged with the resonance component, already adopted in the ENDF/B-VI release 8. New data library files covering from thermal to 20 MeV were created. They are at the preliminary stage of an ENDF/B- VII release.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3672-3681
• /
• 2022

This study investigates the environmental footprint impacts of nuclear energy consumption in the presence of environmental technology and globalization of the ten largest ecological footprint countries from 1990 up to 2017. By considering a set of methods that can help solve the issue of cross-sectional dependence, we employ the Lagrange multiplier bootstrap cointegration method, Driscoll-Kraay standard errors for long-run estimation and feasible generalized least squares (FGLS) and panel-corrected standard errors (PCSE) for robustness. The finding revealed significant negative effects of nuclear energy consumption, environmental-related technology, population density and significant positive effects of globalization and economic growth on ecological footprint. These results are also robust by assessing the long-run impacts of predictors on carbon footprint and CO₂ emissions as alternate ecological measures. These conclusions provide the profound significance of nuclear energy consumption for environmentally sustainable development in the top ten ecological footprint countries and serve as an important reference for ecological security for other countries globally.