• 한국지능시스템학회논문지
• /
• 제15권3호
• /
• pp.357-362
• /
• 2005

Iris recognition system is the one of the most reliable biometries recognition system. An algorithm is proposed to determine the localized iris from the iris image received from iris input camera in client. For the first step, the algorithm determines the center of pupil. For the second step, the algorithm determines the outer boundary of the iris and the pupillary boundary. The localized iris area is transformed into polar coordinates. After performing three times Wavelet transformation, normalization was done using a sigmoid function. The converting binary process performs normalized value of pixel from 0 to 255 to be binary value, and then the converting binary process is compared pairs of two adjacent pixels. The binary code of the iris is transmitted to the server by the network. In the server, the comparing process compares the binary value of presented iris to the reference value in the database. The process of recognition or rejection is dependent on the value of Hamming Distance. After matching the binary value of presented iris with the database stored in the server, the result is transmitted to the client.

• 한국전산구조공학회논문집
• /
• 제21권4호
• /
• pp.357-364
• /
• 2008

본 논문은 단면적이 일정한 직사각형 중공단면을 갖는 아치의 자유진동에 관한 연구이다. 아치의 자유진동을 지배하는 미분방정식을 극좌표계에서 유도하였으며, 이 미분방정식에는 회전관성효과를 고려하였다. 본 연구에서는 원호아치에 비해 구조적 안정성이 우수한 포물선형 아치를 대상아치의 선형으로 결정하였으며, 고정-고정, 고정-회전, 회전-회전의 단부조건을 고려하였다. 미분방정식을 효율적으로 해석하여 정확한 고유진동수를 산정할 수 있는 수치해석 알고리즘을 개발하고, 문헌과 본 연구의 결과를 비교하여 본 연구에서 유도된 이론식 및 수치해석 과정의 타당성을 검증하였으며, 단면폭비, 두께비 및 형상비 등과 같은 제 변수 변화에 따른 무차원 고유진동수의 변화를 고찰하였다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.5-11
• /
• 2011

In this paper, the dynamic response analysis of a floating crane with elastic booms and a cargo is performed. The objective is to consider the effects of the elastic boom in the lifting design stage. Governing equations of the motion for the system which consists of interconnected rigid and flexible bodies are derived based on the formulation of flexible multibody system dynamics. To model the boom as a flexible body, floating reference frame and nodal coordinates are used. Coupled surge, pitch, and heave motion of the floating crane with the cargo which has 3 degree of freedom is simulated by solving the equation numerically. Finally, the effects of the elastic boom for the lifting design that the floating crane is required to lift a heavy cargo are discussed by comparing the simulation result between with the elastic boom and with the rigid one.

• International Journal of Control, Automation, and Systems
• /
• 제5권3호
• /
• pp.283-294
• /
• 2007

In this paper, a nonlinear controller based on adaptive sliding-mode method which has a sliding surface vector including new boundizing function is proposed and applied to a two-wheeled welding mobile robot (WMR). This controller makes the welding point of WMR achieve tracking a reference point which is moving on a smooth curved welding path with a desired constant velocity. The mobile robot is considered in view of a kinematic model and a dynamic model in Cartesian coordinates. The proposed controller can overcome uncertainties and external disturbances by adaptive sliding-mode technique. To design the controller, the tracking error vector is defined, and then the sliding surface vector including new boundizing function and the adaptation laws are chosen to guarantee that the error vector converges to zero asymptotically. The stability of the dynamic system is shown through the Lyapunov method. In addition, a simple way of measuring the errors by potentiometers is introduced. The simulations and experimental results are shown to prove the effectiveness of the proposed controller.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.504-517
• /
• 2015

This paper presents a novel switching voltage model and an offset-based pulse width modulation (PWM) scheme for multilevel inverters with unbalanced DC sources. The switching voltage model under a DC voltage imbalance will be formulated in general form for multilevel neutral-point-clamped topologies. Analysis of the reference switching voltages from active and non-active switching voltage components in abc coordinates can enable voltage implementation for an unbalanced DC-source condition. Offset voltage is introduced as an indispensable variable in the switching voltage model for multilevel voltage-source inverters. The PWM performance is controlled through the design of two offset components in a subsequence. One main offset may refer to the common mode voltage, and the other offset restricts its effect on the quality of PWM control in related DC levels. The PWM quality can be improved as the switching loss is reduced in a discontinuous PWM mode by setting the local offset, which is related to the load currents. The validity of the proposed algorithm is verified by experimental results.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.419-427
• /
• 2010

A parallel control strategy in capacity proportion frequency allocation mode for shunt active power filters (APFs) is proposed to overcome some of the difficulties in high power applications. To improve the compensation accuracy and overall system stability, an improved selective harmonic current control based on multiple synchronous rotating reference coordinates is presented in a single APF unit, which approximately implements zero steady-state error compensation. The combined decoupling strategy is proposed and theoretically analyzed to simplify selective harmonic current control. Improved selective harmonic current control forms the basis for multi-APF parallel operation. Therefore, a parallel control strategy is proposed to realize a proper optimization so that the APFs with a larger capacity compensate more harmonic current and the ones with a smaller capacity compensate less harmonic current, which is very practical for accurate harmonic current compensation and stable grid operation in high power applications. This is verified by experimental results. The total harmonic distortion (THD) is reduced from 29% to 2.7% for a typical uncontrolled rectifier load with a resistor and an inductor in a laboratory platform.

• 한국정밀공학회지
• /
• 제17권8호
• /
• pp.60-70
• /
• 2000

In this paper a 3D position measuring device that finds the 3D position of an arbitarily placed object using a camersa system is introduced. The camera system consists of three stepping motors and a CCD camera and a laser. The viewing direction of the camera is controlled by two stepping motors (pan and tilt motors) and the direction of a laser is also controlled by a stepping motors(laser motor). If an object in a remote place is selected from a live video image the x,y,z coordinates of the object with respect to the reference coordinate system can be obtained by calculating the distance from the camera to the object using a structured light scheme and by obtaining the orientation of the camera that is controlled by two stepping motors. The angles o f stepping motors are controlled by a SGI O2 workstation through a parallel port. The mathematical model of the camera and the distance measuring system are calibrated to calculate an accurate position of the object. This 3D position measuring device can be used to acquire information that is necessary to monitor a remote place.

• 한국측량학회지
• /
• 제28권5호
• /
• pp.479-484
• /
• 2010

GPS/INS을 이용한 항공레이저측량은 GPS 이동측위를 기반으로 정밀하고 신속한 3차원 위치좌표를 취득하기 위하여 GPS 지상기준국의 설치 및 운영이 필수적 요건이지만 지상기준국의 정상적인 운영이 어려운 경우가 많다. 따라서 본 연구에서는 지상기준국의 상시관측소 대체 가능성 검토와 더불어 항공기 GPS와 상시관측소와의 기선거리에 따른 Z값에 대한 영향성을 검토하였다. 그 결과 규정거리 이내의 상시관측소 성과를 대체하여도 충분한 정확도를 얻을 수 있어 활용 가능하다고 판단이 된다. 또한 규정거리 이상의 상시관측소도 양호한 성과를 얻을 수 있었다.

• 한국항공우주학회지
• /
• 제47권1호
• /
• pp.41-48
• /
• 2019

본 논문은 광학적인 방법을 통해 얻은 3차원 좌표들을 이용하여 항공기 동체와 관성항법센서를 정렬하는 방법에 대하여 다루고 있다. 기존에 가공되어 있는 마운트 홀의 제작 정확도를 신뢰하고 장착하던 관행에서 나아가 관성항법센서의 좌표계와 항공기 동체의 기준좌표계를 보다 정확하게 정렬하기 위한 방법에 대해 소개하고 있으며, 실현가능성을 검증하기 위해 실제 3차원 좌표측정장치의 오차 수준을 반영한 시뮬레이션을 통해 정렬 성능을 검증하였다. 또한 광학센서와 관성항법센서의 최적화 기법 기반 정렬 방법을 기술하였다.

• 한국BIM학회 논문집
• /
• 제13권3호
• /
• pp.30-38
• /
• 2023

Building Information Models(BIM) provides rich geometric and attribute information throughout the entire life cycle of a building and infrastructure object, while Geographic Information System(GIS) enables the detail analysis of urban issues based on the geo-spatial information in support of decision-making. The Integration of BIM and GIS data makes it possible to create a digital twin of the land in order to effectively manage smart cities. In the perspective of integrating BIM data into GIS systems, this study performs literature reviews on georeferencing techniques and identifies limitations in carrying out the georeferencing process using attribute information associated with absolute coordinates probided by Industry Foundation Classes(IFC) as a BIM standard. To address these limitations, an automated georeferencing process is proposed as a pilot study to position a IFC model with the Local Coordinate System(LCS) in GIS environments with the Reference Coordinate System(RCS). An evaluation of the proposed approach over a BIM model demonstrates that the proposed method is expected to be a great help for automatically georeferencing complex BIM models in a GIS environment, and thus provides benefits for efficient and reliable BIM and GIS integration in practice.