• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.311-321
• /
• 2019

This study was carried out to establish basic data for the development of slow-moving landslide hazard classes. Mountain slopes in slow-moving landslide areas ranged from $11.8^{\circ}$ to $37.0^{\circ}$ with a mean slope of $23.8^{\circ}$. However, the slope inclination of microtopography in slow-moving landslide areas was slightly different, with a mean slope of $23.5^{\circ}$ ($10.7^{\circ}{\sim}41.5^{\circ}$) compared with the mountain slope. There was a significant difference (p < 0.05) between the contour intervals of microtopography and the contour intervals of the slow-moving landslide areas. Among all the slow-moving landslide areas examined, 14 plots (approximately 38.0%) were classified into landslide hazard class I, 6 plots (approximately 16.0%) into landslide hazard class II, 5 plots (approximately 14.0%) into landslide hazard class III and IV, and 16 plots (approximately 43.0%) into landslide hazard class V, whereas 9 plots (approximately 24.0%) fit the no landslide hazard class.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8A
• /
• pp.879-888
• /
• 2004

In this paper, we propose a real time QoS(Quality of Service) guaranteed transmission mechanism for MPEG video traffic at the congested node in IP based networks. Recent spread of the Internet has increased the demands of a real time multimedia service of the quality, Because the type of Internet services can, however, offer the best effort delivery strategies, it is difficult to treat all the types of traffic with differential COS (Class of Service). Most of all, the hierarchical coding method of MPEG data utilizes the reference frame for the motion prediction. The loss of the reference frames makes QoS of the video traffic degraded because the reference frame bit error causes the consecutive packet loss. Therefore we have studied the real time QoS guaranteed mechanism for video traffic by analyzing the previous methods. Computer simulation results show that the proposed scheme has better performance than the previous one.

• The korean journal of orthodontics
• /
• v.48 no.4
• /
• pp.236-244
• /
• 2018

Objective: The aim of this study is to compare the adaptation of a straight wire between brackets positioned at the mid-lingual surface and those placed gingivally by using a three-dimensional simulation software. Methods: This cross-sectional study was performed using OrthoAid, an in-house software. The subjects were 36 adolescents with normal Class I occlusion. For each dental cast, two bracket positioning approaches, namely the middle and gingival, were examined. In the middle group, the reference points were placed on the mid-lingual surface of each tooth, while in the gingival group, the reference points were positioned lingually on the anterior teeth. A 4th degree polynomial was adopted, and the in-plane and off-plane root mean squares (RMSs) of the distances between the reference points and the fitted polynomial curve were calculated using the software. Statistical analysis was performed using the paired-samples t-test (${\alpha}=0.05$). Results: The mean in-plane RMS of the polynomial curve to the bracket distance in the gingival group was significantly lower than that in the middle group (p < 0.001). The off-plane RMS was higher in the gingivally positioned brackets in the maxilla than in the middle group (p < 0.001). However, the off-plane RMS in mandible was not statistically significantly different between the two groups (p = 0.274). Conclusions: The results demonstrated that the gingival placement of lingual brackets on the anterior teeth could decrease the distance between a tooth and the straight wire.

• The Journal of Korean Association of Computer Education
• /
• v.10 no.4
• /
• pp.83-92
• /
• 2007

Curriculum can represent the identity of University as an important factor, and especially university has sole power to design and manage his curriculum. So, the information literacy curriculum which teach students to create, store, communicate their knowledge is very important position in the liberal arts curriculum. Thus, this study designs the reference model as 3-dimensional cubic model for information literacy curriculum to help curriculum designers design, manage, and evaluate it. For developing this model, I researched many books and web sites about some of domestic and U.S. universities' curriculums, and made up some questionnaires about students' satisfaction and the direction of information literacy education. An information literacy curriculum was designed using this reference model and lots of students are satisfied with this curriculum after activating in this class. Designed cubic reference model which has a characteristic to expose flexible and systematic context representation in the university curriculum can guide researchers to design, manage, and evaluate information literacy curriculum.

• Journal of Environmental Science International
• /
• v.29 no.3
• /
• pp.307-318
• /
• 2020

The integrated permit system is applied to class 1 and 2 atmospheric and water pollutant discharge facilities in 19 sectors. The fertilizer sector should receive a permit for a period of four years, from 2019 to 2023. The purpose of this study is to investigate the differences between the Korean Best Available Techniques (BAT) reference document (K-BREF) and the European Union BAT reference document (EU-BREF) in terms of the process and emission characteristics of fertilizer manufacture. K-BREF is written by focusing on products, whereas EU-BREF is produced on focusing on manufacture process. There are five types of BATs(best available techniques economically achievable) in Korea. These BATs selected mainly to recover and reuse raw meterials and save energy. The number of BATs and BAT-AELs(BAT associated emission level) in K-BREF is smaller than that in EU-BREF. We suggest that BATs and those environmental management parameters in Korea need to further reflect the emission characteristics in the fertilizer sector.

• Korean Journal of Remote Sensing
• /
• v.20 no.6
• /
• pp.383-396
• /
• 2004

The application of spatial statistics to obtain the spatial uncertainty distributions in classification of remote sensing images is investigated in this paper. Two quantitative methods are presented for describing two kinds of uncertainty; one related to class assignment and the other related to the connection of reference samples. Three quantitative indices are addressed for the first category of uncertainty. Geostatistical simulation is applied both to integrate the exhaustive classification results with the sparse reference samples and to obtain the spatial uncertainty or accuracy distributions connected to those reference samples. To illustrate the proposed methods and to discuss the operational issues, the experiment was done on a multi-sensor remote sensing data set for supervised land-cover classification. As an experimental result, the two quantitative methods presented in this paper could provide additional information for interpreting and evaluating the classification results and more experiments should be carried out for verifying the presented methods.

• School Mathematics
• /
• v.17 no.2
• /
• pp.273-287
• /
• 2015

The purpose of this study was to obtain a deeper understanding of didactic processing in the class that unified with engineering by analyzing on the types of the teacher's instumental orchestration and schematizing it as an activity system. In order to do so, a qualitative study of a 5th grade class for math-gifted students in Y elementary school with ethnography was conducted. Interviews with the students were held and various document data were collected during the participational observation of the class. The collected qualitative data were gone through the analytical induction while the instrumental orchestration of Drijvers, Boon, Doorman, Reed, & Gravemeijer as well as the secondgeneration activity theory of Engestrom were using as the frame of conceptional reference. According to the result of this study, there exist 4 types, such as 'technical demo' 'link screen board', 'detection-exploring small group' and 'explain the screen and technical demo'.

• Journal of Periodontal and Implant Science
• /
• v.30 no.2
• /
• pp.229-242
• /
• 2000

The purpose of this study was to evaluate the effect of fibrin tissue adhesive and porous resorbable calcium carbonate on the periodontal regeneration of the class II furcation defect in dogs. Class II furcation defect was surgically created on the second, third, and fourth premolars bilaterally in the mandibles of six mongrel dogs. The experimental sites were divided into four groups according to the treatment modalities: Control-surgical debridement only; Group I-calcium carbonate grafting; Group II-application of fibrin adhesive only; Group III-application of fibrin adhesive after calcium carbonate grafting. The animals were sacrificed at the 2, 4, and 12 weeks after periodontal surgery and the decalcified specimens were prepared for histological and histometrical examination. The results are as follows : Clinically, there were no inflammatory response in all groups after 2, 4, 12 weeks. In the Control group, junctional epithelium was grown downward to the reference notch. In Group I, graft materials were exfoliated from the defect throughout the experimenta periods andnew bone was seen in the notch area at 4 and 12 week specimens. In Group II, fibrin adhesive was absorbed at 2 week specimens, and connective tissue attachment increased than that of control group. New cementum and new bone were seen above the notch area. In Group III, the graft material was maintained in the defect throughout the experimental period and inducing the amount of periodontal tissue regeneration was higher than other groups. These results suggest that the use of fibrin tissue adhesive in conjunction with porous resorbable calcium carbonate would improves the stability of graft material and inhibit the epithelial down growth and make it be a feasible method for periodontal regeneration.

• Journal of Sensor Science and Technology
• /
• v.8 no.2
• /
• pp.124-132
• /
• 1999

In this paper, we propose interband vector quantization of remotely sensed satellite image using edge region compensation. This method classifies each pixel vector considering spectral reflection characteristics of satellite image data. For each class, we perform classified intraband VQ and classified interband VQ to remove intraband and interband redundancies, respectively. In edge region case, edge region is compensated using class information of neighboring blocks and gray value of quantized reference band. Then we perform classified interband VQ to remove interband, redundancy using compensated class information, effectively. Experiments on remotely sensed satellite image show that coding efficiency of the proposed method is better than that of the conventional method.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.1
• /
• pp.34-41
• /
• 2018

A flange joint is a pipe connection used to prevent the leakage of high-pressure fluids by inserting a gasket and tightening the bolts. Among several kinds of gaskets available, metal ring type joint gaskets are most widely used in conditions that require high-temperature and high-pressure fluid flow, such as oil pipelines, gas pipes, pumps, valve joints, etc. The purpose of this study is to investigate the contact pressure and stress characteristics closely related to the sealing performance of Class 900 flange joints used in high temperature and high pressure environments. The dimensions of flange joints with five different nominal pipe sizes were determined with reference to those specified in ASME 16.5. The metal ring gaskets inserted in the joints were octagonal and oval gaskets. The bolt tensile forces calculated from the tightening torques were input as the bolt pretension loads in order to determine the contact pressure and stress levels after fastening. Loading was composed of three steps, including the fastening step, and different amounts of applied pressures were used in each analysis to investigate the effect of fluid pressure on the contact force of the joints. A general-purpose software, ANSYS 17.2, was used for the analysis.