• 한국생산제조학회지
• /
• 제6권3호
• /
• pp.96-102
• /
• 1997

Eigenvalue analysis of vibration mode and an analysis by frequency response among the methods of predicting gear noise are related with transmitting sound of vibration. In this study we intended to reduce the vibration noise of differential gear by reducing torque fluctuation of drive pinion shaft which causes vibration noise of differential gear in rear wheel drive vehicles. For this we developed multi-degree of freedom analysis model in which mass moment of inertia and torsional spring combined and we examined the influence of torsional vibration of driveline elements by performing forced vibration analysis of engine excitation torque. We studied the methods for reducing torsional vibration of driveline according to the design factor of propeller shaft and examined the effects reducing vibration in differential gear by applying flexible coupling.

• KCI Concrete Journal
• /
• 제14권1호
• /
• pp.23-29
• /
• 2002

Recent construction activities have given rise to civil petitions associated with vibration-induced damages or nuisances. To mitigate unfavorable effects of construction activities, the measures to reduce or isolate from vibration need to be adopted. In this research, a vibration-mitigated concrete, which is one of the active measures for reducing vibration in concrete structures, was investigated. Concrete was mixed with vibration-reducing materials (i.e. latex, rubber power, plastic resin, and polystyrofoam) to reduce vibration and tested to evaluate dynamic material properties and structural characteristics. Normal and high strength concrete specimens with a certain level of damage were also tested for comparisons. In addition, recycling tires and plastic materials were added to produce a vibration-reducing concrete. A total of 32 concrete bars and eight concrete beams were tested to investigate the dynamic material properties and structural characteristics. Wave measurements on concrete bars showed that vibration-mitigated concrete has larger material damping ratio than normal or high strength concrete. Styrofoam turned out to be the most effective vibration-reducing mixture. Flexural vibration tests on eight flexural concrete beams also revealed that material damping ratio of the concrete beams is much smaller than structural damping ratio for all the cases.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.316-321
• /
• 1997

The purpose of this study is to reduce the vibration noise of differential gear by reducing torque fluctuation of drive pinion shaft which causes vibration noise of differential gear in rear wheel drive vehicles. For this we developed multi-degree of freedom analysis model in which mass moment of inertia and torsional spring combined, the validity of the simulation model was checked by the field test and we examined the influence of torsional vibration of driveline elements by performing forced vibration analysis of engine excitation torque. We studied the methods for reducing torsional vibration of driveline according to the design factor of propeller shaft and examined the effects reducing vibration differential gear by applying flexible coupling.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.259-262
• /
• 2005

The large transformers used in the electric power company become targets of public complaints because of those characteristics generating high-level noise. Reducing vibration level is the basis of noise control for the large transformers. For this reason, a vibrating reducing element is developed for the large transformers with a sub-element enduring seismic movement. Large attenuation of vibration is achieved by applying the element to the large transformers in a substation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.561-567
• /
• 1998

Recently, TV makers have tried for high sound quality and power, However, due to the high power of the speaker the structure of set brings about a sound vibration problem. Therefore, this paper illustrates the sound vibration phenomenon for a monotype TV set and suggests guide lines for reducing the sound vibration in the design of TV sets,

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.924-928
• /
• 2002

Response of the rail surface is an important factor for the train safety and comfortable travel, and evaluation of vibration at the area along a rail is an important factor for the vibration. The dominant method to reduce the vibration that reach the ground is installing vibration absorber between rall and the under structure. In this paper, we evaluated the vibration reducing effect of using vibration control sleeper pads to slave and earth at certain distance from the sleepers.

• 한국공간구조학회논문집
• /
• 제7권4호
• /
• pp.97-104
• /
• 2007

교통진동의 영향을 받는 중층건물의 진동특성에 관한 논문이다. 현장진동계측은 진동원과 진동감소대책을 위하여 실시되었다. 시간영역 진동데이터는 버스와 지하철로 인한 건물에 전달된 진동 영향 등의 진동특성을 위하여 이용되었다. 진동대책을 통한 진동감소의 효과 역시 입증할 수 있었다.

• 한국재난정보학회 논문집
• /
• 제8권2호
• /
• pp.197-203
• /
• 2012

최근 환경 공해 저감에 대한 사회적 요구가 높아짐에 따라 구조물의 방음, 방진 설계가 더욱 중요해지고 있다. 이 논문에서는 최근 개발된 수직형 면진장치의 기본 개념 및 성능 확인 실험 결과를 제시하였다. 개발된 면진장치는 PTFE 재질 마찰면의 마찰작용을 이용하여 수직방향의 진동을 감쇠시키고 수평 및 수직으로 배치된 폴리우레탄 소재의 스프링을 통하여 복원력을 제공하는 구조이다. 성능확인 실험은 하중 재하 속도에 변화에 따른 성능 변화추이를 파악하기 위한 실험과 고정하중이 적용된 후 발생되는 진동하중 작용 시 가정된 하중-변위 특성을 확인하기 위한 실험으로 구성하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.570-573
• /
• 2004

Conventional methods for reducing vibration in engineering designs may be undesirable in conditions where size or weight must be minimized, or where complex vibration spectra exist. Some alloys with a combination of high damping capacity and good mechanical properties can provide attractive techanical and economical solutions to problems involving seismic, shock and vibration isolation. In this paper, it showed the noise and vibration characteristic was compared conventional rail joint to improved rail joint(damping alloy) for reducing noise and vibration. Its applicability to rail joint is discussed.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.362-369
• /
• 2002

This paper mainly propose the new passive vibration control device, named BRV(the bridge reduced vibration), for reducing excessive traffic-induced vibration of bridges and for measuring performance of BRV numerical example was simulated. The purpose of BRV is mainly on reducing vertical acceleration and displacement of bridge. In BRV we can control the stiffness and damping coefficient to accept the performance we want. The result of simulation showed that the vertical acceleration and displacement was effectively diminished. It would be concluded that BRV can be used to improve the serviceability of bridge and fatigue life etc.