• Korean journal of food and cookery science
• /
• v.11 no.2
• /
• pp.113-118
• /
• 1995

A preferable mixing ratio of a six-vegetable juice was suggested in this study. The vegetables used for preparation of mixed vegetable juice were carrot(Ct), cabbage(Cg), pear(Pr), cucumber(Cr), celery (Cy) and dongchimi(Di). The characteristics of pH, titratible acidity, reducing sugar, turbidity, solids, color and acceptability were compared to determine the mixing ratio. The vegetables showed a wide ranHe of pH of 3.70-6.01, acidity of 28.92 uv~74.40 nd and reducing sugar of 1.20ft~ 12.69fo. Celery juice showed the higest suspension stability and "b" value and the lowest values in Hunter "L" and "a" values among the 6 vegetable juice. The preferable mixing ratio of two-vegetable juice selected were Ct-Di(1 : 4), Cg-Pr(1 : 3) and Cr-Cy(3 : 1). From the various ratio of the three of biary mixtures of Cg-Pr(1 : 3): Ct-Di(1 : 4): Cr-Sy(3 : 1), two ratio of 5.0 : 2.5 2.5(V-6A) and 6.0 : 2.0 : 2.0(V-6B) were suggested as the most prefered six-vegetable juice. Pear, dongchimi and cucumber were found to be influential on the preference. The pH and titratible acidity of the two juices with different ratios were in the range of 4.92~4.98 and 36.g∼37.4 ml, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.719-724
• /
• 2003

In this paper, we have presented the simulation results about threshold voltage of nano scale lightly doped drain (LDD) MOSFET with halo doping profile. Device size is scaled down from 100nm to 40nm using generalized scaling. We have investigated the threshold voltage for constant field scaling and constant voltage scaling using the Van Dort Quantum Correction Model (QM) and direct tunneling current for each gate oxide thickness. We know that threshold voltage is decreasing in the constant field scaling and increasing in the constant voltage scaling when gate length is reducing, and direct tunneling current is increasing when gate oxide thickness is reducing. To minimize the roll off characteristics for threshold voltage of MOSFET with decreasing channel length, we know $\alpha$ value must be nearly 1 in the generalized scaling.

• Preventive Nutrition and Food Science
• /
• v.15 no.1
• /
• pp.30-35
• /
• 2010

The potential biological activities of methanol extract and 5 fractions (hexane, $CH_2Cl_2$, EtOAc, BuOH and water) from roots of Astragalus membranaceus were examined by 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging, hydroxyl radical (${\cdot}OH$) scavenging activity, reducing power assays, lipid peroxidation inhibitory activity, $\alpha$-amylase and $\alpha$-glucosidase inhibition assays. The EtOAc fraction showed high DPPH free radical scavenging activity ($EC_{50}=170.34\;{\mu}g/mL$), hydroxyl radical scavenging activity ($EC_{50}=32.14\;{\mu}g/mL$), lipid peroxidation inhibitory activity ($EC_{50}=52.46\;{\mu}g/mL$) and a concentration dependence, with OD value ranging from 0.234 to 0.345 (0.1 to 0.5 mg/mL), for reducing power. The EtOAc fraction has the highest total phenolic content ($142.13\;Gal\;{\mu}g/mg$) and the $CH_2Cl_2$ fraction has the highest flavonoid content ($71.63\;Que\;{\mu}g/mg$). Meanwhile, hexane and EtOAc showed certain $\alpha$-amylase and $\alpha$-glucosidase inhibition activities. These results suggest that the methanol extract and fractions from Astragalus membranaceus root have significant antioxidant and anti-diabetes activities, which could be used as a potential source of pharmaceutical materials.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.6
• /
• pp.98-105
• /
• 2000

Recently, the construction method of high pressure jet-grouting is in wide-use, for the purpose of structure foundation ground, reinforcing of ground behind propped retaining walls and cut-off in order to perform safe construction of underground excavation work. This study was performed a serious of tests of field permeability and unconfined compressive strength upon ground improved established on the ground behind propped retaining walls and examined proper jet mechanism by changing the construction parameter value of high pressure jet-grouting. In addition, we got the conclusion like the followings as a result of inspecting the condition of earth pressure distribution and deformation, using elasto-plastic method and FEM. 1. In that characteristics of strength of ground improved, with the same condition of construction parameter, unconfined compressive strength of sand gravel is shown bigger than that of silty sand by about 1.6 times and cut-off effect is shown to have effect of reducing the permeability of original ground by about 10$^{-2}$ ~10$^{-3}$ cm/s. 2. As a result of analysis of figures of horizontal displacing quantity of propped retaining walls materials regarding before and after High pressure jet- grouting through FEM, the reducing quantity of 0.1~0.3mm in maximum horizontal displacement is shown.

• Journal of Institute of Convergence Technology
• /
• v.7 no.1
• /
• pp.15-18
• /
• 2017

As emission gas regulation of deisel vehicles is strengthened to Euro-6, It becomes difficult to deal with NOx regulated value mainly by EGR without additional after-treatment system. In addition, RDE(Real Driving Emissions) test will be introduced after september 2017. Therefore, It is essential to develop the after-treatment of diesel vehicles which reduce NOx emissions. It is possible to use DOC, DPF, LNT or DOC, DPF and SCR as a after-treatment system for reducing NOx. However, It is expected that the SCR will be applied widely because LNT alone does not have sufficient NOx purification efficiency. In this study, It tried to analyze the efficiency of reducing NOx emissions during the mode test by attaching a NOx sensor to test vehicle. As a result, It was confirmed that NOx emissions was significantly reduce through the after-treatment system from engine. And the NOx reduction efficiency of SCR was about 4.5 times better than DOC, DPF.

• The Journal of Asian Finance, Economics and Business
• /
• v.6 no.4
• /
• pp.129-137
• /
• 2019

Tax can be categorised into direct tax and indirect tax. This paper uses the ordinary least-squares regression method to study the impact of direct and indirect tax on economic growth in Vietnam in the period 2003-2017. Statistical data is collected from the Ministry of Finance of Vietnam. Theoretically, tax generates the state budget revenue and is a tool to regulate the economy. The results of statistical tests show that tax has a positive impact on Vietnam's economic growth. However, the effects of direct tax and indirect tax are different. The indirect tax has a positive influence and promote Vietnam's economic growth, while the impact of the direct tax is invisible. There has not been sufficient evidence to confirm that the indirect tax has a more positive impact than the direct tax. To promote economic growth, Vietnam needs to restructure its tax system towards: (1) Increasing the proportion of indirect tax, reducing the proportion of direct tax in the state budget revenue; (2) Expanding tax bases; (3) Reducing tax rates of corporate income tax and personal income tax; (4) Increasing tax rates of environmental protection tax, natural resources tax, value added tax and excise tax on some types of goods which harm health and environment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.318-322
• /
• 1997

The (Sr$_{l-x}$.Ca$_{x}$)TiO$_3$(0.05$\leq$x$\leq$0.2) ceramics were fabricated to form semiconducting ceramics by sintering at about 1350[$^{\circ}C$] in a reducing atmosphere($N_2$gas). After being fired in a reducing atmosphere, metal oxides, CuO, was painted on the both surface of the specimens to diffuse to the grain boundary. They were annealed at 1100[$^{\circ}C$] for 2 hours and cooled to room temperature. The grain boundary was composed of the continuous insulating layers. The capacitance changes slowly and almost linearly in the temperature region of -30~+85[$^{\circ}C$]. The capacitance characteristics appears a stable value within $\pm$10[%]. The conduction mechanism of the specimens observed in the temperature range of 25~125[$^{\circ}C$], and is divined into three regions haying different mechanism as the current increased: the region I below 230[V/cm] shows the ohmic conduction. The region II can be explained by the Poole-Frenkel emission theory, and the region III is dominated by the tunneling effect.ect.

• Culinary science and hospitality research
• /
• v.24 no.1
• /
• pp.13-23
• /
• 2018

This study aimed to investigate the characteristics of 3 pre-treatment of mealworm(Tenebrio molitor), and offer basic research data through appropriate pre-treatment method based on the component analysis result. This study was preparing the control group sample No.0(not contain mealworm), and the other sample (Sample No.1,2,3) was using the mealworm prepared in each of the three methods. By using the sample, this study conducted an inspection for component analysis, mineral contents, pH, color value, total amount polyphenols, DPPH radical scavenging activity, reducing power, acceptance test. Each experiments are three times repeated and validated following the one-way ANOVA analysis to verify a significant difference. Acceptance test conducted by 50 consumers indicate consumption decision for sunsik. using the seven point scale, assessment for appearance, flavor, taste, texture, overall acceptance. The research findings showed that sample containing sauted mealworm(SE2) is higher preference and significant in antioxidant activity(total amount polyphenols, DPPH radical scavenging activity, reducing power). Therefore, it is better to use sauted. The result of this study suggest that sauted mealworm is good ingredient for consumer acceptability and functionality of sunsik. According to results of the study, it is suggested to make better use of food, and provide food developer with meaningful date for market targeting. In addition, this study also provides the information for improving awareness of edible insect.

• Natural Product Sciences
• /
• v.19 no.4
• /
• pp.297-302
• /
• 2013

The current study was conducted to evaluate the antibacterial and antioxidant activities of the essential oil fraction from the roots of Angelica tenuissima Nakai and its main components. We extracted the essential oil fraction from the roots of A. tenuissima using steam distillation and isolated its main components. Their antibacterial activities were determined by broth dilution test against food-borne pathogenic bacteria. Antioxidant activities were evaluated by DPPH-scavenging assay and reducing-power test. Also tested was their ability to inhibit the growth of two gastrointestinal cancer cell lines, Caco-2 and MKN-45. The A. tenuissima oil fraction and its main components, ligustilide and butylidene phthalide exhibited marked inhibitory effects against most of the tested antibiotic-susceptible and antibiotic-resistant bacterial strains with minimum inhibiting concentrations (MICs) from $0.21{\pm}0.08$ to $3.60{\pm}0.89mg/ml$. They also showed growth-inhibiting activity against Caco-2 and MKN-45 cells. The oil fraction showed significant antioxidant activities in DPPH radical scavenging assay and reducing-power test. Taken together, A. tenuissima essential oil could be used as a safe additive for preventing food contamination by pathogenic bacteria. Additionally, its antioxidative activity and the ability to inhibit gastrointestinal carcinoma cell lines could increase its value for functional foods and prevention of cancer.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.487-495
• /
• 2003

Bearings at the obtuse corner are subjected to much larger vertical reactions than other bearings because of the geometric shape of skew bridges. The current relevant specifications require that additional bars should be disposed at the bottom of concrete deck slabs to deal with the large vertical reaction on bearings at the obtuse corner. In this study, new methods of reducing the magnitude of the vertical reaction on bearings at the obtuse corner by the stiffness adjustment of bearings were proposed. The basic concept of proposed methods was to redistribute support reactions by reducing the vertical stiffness of bearings at the obtuse corner showing a relatively large vertical reaction. For 45 simply supported skew bridges designed according to the current relevant specifications, the redistribution effect of vertical reactions by the stiffness adjustment of bearings was investigated. Parameters such as skew angle, girder spacing, and deck aspect ratio that affect the distribution of support reactions were considered. The results of the analyses show that the magnitude of the vertical reaction on bearings at the obtuse corner can be reduced to the levels of straight bridges by replacing the existing bearings at the obtuse corner with new ones having the value of 1/10 or 1/20 of the vertical stiffness of the existing bearings. The reduction effect of the vertical reaction on bearings at the obtuse corner increases as the girder spacing decreases and it is more pronounced when the deck aspect ratio is 2.0.