• Proceedings of the Korean Society of Veterinary Pathology Conference
• /
• 2002.11a
• /
• pp.149-149
• /
• 2002

Epidemiologically the incidence of liver cancer is markedly sex-differentiated, with a much higher frequency in men than in women. In experimental animals, it is also higher in male than in female irrespective of carcinogen-induced or spontaneous tumors. Therefore, we tried to investigate the modulating effects of sex hormones in experimental hepatocarcinogenesis. For induction of liver tumors, mini-osmotic pump containing diethylnitrosamine at a dose level of 47.5mg was implanted into the peritoneal cavity of the rat at 6 weeks old. To remove the effects of male sex hormones, the animals of group 2 were castrated one week prior to DEN treatment. To see the effects of estrogen, pellet containing 1g or 10g of estradiol-3-benzoate was infused subcutaneously to the animals of group 3 and 4 one week prior to DEN treatment. The pellets were exchanged every 4 weeks until sacrifice. All animals were sacrificed at 26 weeks after DEN treatment. The tumor incidences in group 1 (DEN alone), group 2 (DEN +castration), group 3(DEN +EB 1g) and group 4 (DEN +EB 10g) were 100％ (15/15), 93.3％ (14/15), 85.7％ (12/14) and 66.7％ (10/15), respectively, showing that the value of group 4 is significantly different from that of group 1. Tumor multiplicity data of group 1, 2, 3 and 4 were 5.470.73, 2.800.51, 2.070.41 and 1.670.46, respectively, showing castration or EB treatment reduced number of liver tumors significantly (P<0.001). With immunohistochemistry and Western blotting of ER the expressions were detected in normal adjacent liver cells but decreased or lost in tumor cells. From these results we conclude that female sex hormone, especially estrogen, may act as a liver tumor suppressor, and it seemed that the down regulation of ER may be associated with liver tumor development.

• Horticultural Science & Technology
• /
• v.31 no.6
• /
• pp.714-719
• /
• 2013

The bent peduncle phenomenon (BPP) is known as a kind of physiological disorders found in cut rose plants, which causes the reduction of cut flower yields. As yet unknown mechanisms, however, it has not been easy to find solutions for BPP. To address this challenge, this study was conducted to investigate the characteristics of floral morphology, growth, and endogenous phytohormone level of BPP shoots in cut rose plants (Rosa hybrida L. 'Beast'). Morphological observation confirmed the fact that BPP was accompanied by the early formation and being phyllody of a specific sepal among five sepals, which gave rise to peduncle bending in the upper part of the phyllody with fasciation. Year-round BPP frequency in 'Beast' cultivar was in the range of 5 to 20% with seasonal change, increasing rapidly with an average temperature rise in summer. Except bent peduncle, the BPP shoots appeared to grow normally in terms of speed and size of floral development in comparison with normal. However, carbohydrate distribution to the floral part in BPP shoots was significantly reduced. The level of endogenous IAA (3-Indoleacetic acid) within the floral part in BPP shoots was highly maintained during floral development, in contrast to normal shoots. $GA_3$ contents were not significantly different between normal and BPP shoots. This study indicates that BPP would be induced by a series of courses: abnormally early formation of a specific sepal relative to high temperature, being phyllody of the sepal with fasciation, and continuous supply of endogenous IAA by phyllody.

• Korean Journal of Acupuncture
• /
• v.34 no.4
• /
• pp.265-270
• /
• 2017

Objectives : The present study aimed to examine the analgesic effect of electroacupuncture(EA) applied to the brook point of the Liver meridian in the rat model of inflammatory pain and to investigate involvement of endogenouse opioid in the EA-induced analgesia. Methods : Knee arthritis was induced by injection of $125{\mu}l$ of complete Freund's adjuvant into the knee joint cavity unilaterally. To examine the level of pain, weight bearing forces(WBFs) of affected limb was measured. EA treatment was given at the LR2, LI4 or non-acupoint on the contralateral limb with frequency of 2 Hz and intensity of 2 mA under gaseous anesthesia. Results : After induction of arthritis, rats subsequently showed a reduced stepping force of the affected hindlimb due to a painful knee. EA applied to the LR2 point on the contralateral hind limb produced a significant improvement of stepping force of the hind limb lasting for at least 2 h, and this effect was equivalent to that obtained by 5 mg/kg of oral indomethacin. The effect of EA was specific to the acupoint since it could not be mimicked by EA applied to the LI4 point or the arbitrary non-acupoint. The analgesic effect was blocked by pretreatment with naltrexone(10 mg/kg, i.p.). Conclusions : These results suggest that acupuncture applied to LR2, brook point of Liver meridian suppresses inflammatory pain in a rat model of knee arthritis and this effect seems to be mediated by endogenous opioid systems.

• Food Science of Animal Resources
• /
• v.27 no.1
• /
• pp.60-66
• /
• 2007

We investigated the effects of dietary supplements of probiotics, illite, active carbon and hardwood vinegar on growth performance, carcass characteristics and fatty acid composition in finishing pigs. One hundred fifty pigs ($Landrace{\times}Yorkshire{\times}Duroc$; $32.3{\pm}1.3 kg$ average initial body weight) were used in a 100 day experiment. Pigs were randomly placed into five experimental feeding groups (control, 0.2% probiotics, 1.0% illite, 1.0% active carbon and 1.0% hardwood vinegar) and were slaughtered at approximately 110 kg live weight. There was a slight, but insignificant increase in average daily body weight gain and feed intake among all treatment groups. Feed conversion was reduced when probiotics were added (p<0.05). There were no significant differences in the carcass rate and back fat thickness among the all treatment groups including controls. However, the frequency rate of grade A increased in the groups fed 1.0% active carbon and hard- wood vinegar compared to controls. Stearic acid content was lower in the groups fed probiotics illite active carbon and hardwood vinegar (p<0.05). Oleic acid contents were higher only in the groups fed 1.0% active carbon and hardwood vinegar (p<0.05).

• Applied Biological Chemistry
• /
• v.44 no.4
• /
• pp.240-245
• /
• 2001

Suppression of nitrate accumulation in vegetables through foliar application of micronutrients was investigated. Spinach and lettuce were grown in pots under greenhouse condition. Micronutrient solutions containing Cu, Mn, Mo, and Zn were used; chitosan was added into one and the other contained chitosan oligomers. The micronutrient solutions were sprayed on the leaves at 3 and 4 weeks after transplanting of 20-day-old seedlings. Plants were harvested at 5-weeks after transplanting. Yield, contents of chlorophyll, Brix value, micronutrient, and nitrate, and nitrate reductase activity were measured. Fresh weights of lettuce and spinach were significantly increased by the foliar application of micronutrients. Contents of chlorophyll and micronutrients were higher in micronutrient-treated plants, while those of nitrate were reduced by about 10 and 14-23% in lettuce and spinach, respectively. Compared to the control plants, nitrate reductase activity was higher in plants treated with micronutrients. Results of this study indicate the effect of micronutrients on the suppression of nitrate accumulation was relatively small in comparison to the contents of nitrate in leaves of spinach and lettuce. To maximize the effect, nutrient composition in solution, application time, and frequency should be further examined, taking into consideration nitrogen level in soil and other environmental factors including light condition.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.3
• /
• pp.348-353
• /
• 1996

Mutation tachniques inducing more useful mutations and reducing somatic effects need to be improved for crop breeding. Seeds of barley varieties ; Dema, Grosso were treated with two types of mutagens ; 1) chemical treatment: single treatment or double treatment of two mutagens (N-nitroso-N-methylurea ; MNH, Sodium Azide; NaN$_3$) 2) gamma ray irradiation treatment. After treatment, half of seeds were used for germination test and half of seeds were sown to the field. With the higher dose of mutagen both chemical and gamma ray were plants treated, the higher rate of growth reduction rate was in M$_1$ seedling. In chemical treatment, germination rate of seeds, growth rate of coleoptile and root in double treatment of chemical mutagens were better than single treatments, especially in same dose. Growth inhibition rate of plant in double treatment of 1.0mM MNH(0.5mM MNH + 0.5mM MNH), for example, were less than one of plants of single treatment of 1.0mM MNH in pot and petri dish test. Growth reduction rate of culm and fertility rate in M$_1$ plants double treated in same dose of single treatment were also less than single one. With the higher dose of mutagen both chemical and gamma ray were plants treated, the higher frequency of chlorophyll mutants was in M$_2$ seedling. The rate of chlorophyll mutants in double treatment of chemical mutagens were higher than single treatment. Double treatment methods can be a improved method for induction of new good mutants, which were induced more useful mutations and reduced harmful somatic effects.

• International Journal of Highway Engineering
• /
• v.8 no.3 s.29
• /
• pp.77-88
• /
• 2006

The maintenance / repair of concrete pavements has become an issue as a result of increasing of concrete pavements' service year. Asphalt overlay is applied to the concrete pavements after partial repairs on all occasions. This thesis discusses the application standard, evenness, skid resistance, noise, economical efficiency, extension of life span, etc. of diamond grinding, a method of maintenance about concrete pavements. Based on this, it was applied to the field and measured the performance. It was measured the longitudinal evenness of before and after the construction through measurement equipment. and surveyed the skid resistance the each lane classified using the SN standard value. In case of noise, it is selected the kind of vehicle, velocity, then measured the noise between control and constructed site. In addition, it is evaluated the average texture depth. As a result of the analysis, longitudinal evenness is improved about $6{\sim}40%$, skid resistance is improved 66% at first section,37% at second section. Noise is reduced 3.4dB average, and average texture depth is 79% deeper than control section. Therefore, it can be concluded that diamond grinding is suitable as maintenance / repair method of concrete pavements.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.148-148
• /
• 2011

Recently, there have been many research activities to develop the large-area plasma source, which is able to generate the high-density plasma with relatively good uniformity, for the plasma processing in the thin-film solar cell and display panel industries. The large-area CCP sources have been applied to the PECVD process as well as the etching. Especially, the PECVD processes for the depositions of various films such as a-Si:H, ${\mu}c$-Si:H, Si3N4, and SiO2 take a significant portion of processes. In order to achieve higher deposition rate (DR), good uniformity in large-area reactor, and good film quality (low defect density, high film strength, etc.), the application of VHF (>40 MHz) CCP is indispensible. However, the electromagnetic wave effect in the VHF CCP becomes an issue to resolve for the achievement of good uniformity of plasma and film. Here, we propose a new electrode as part of a method to resolve the standing wave effect in the large-area VHF CCP. The electrode is split up a series of strip-type electrodes and the strip-type electrodes and the ground ones are arranged by turns. The standing wave effect in the longitudinal direction of the strip-type electrode is reduced by using the multi-feeding method of VHF power and the uniformity in the transverse direction of the electrodes is achieved by controlling the gas flow and the gap length between the powered electrodes and the substrate. Also, we provide the process results for the growths of the a-Si:H and the ${\mu}c$-Si:H films. The high DR (2.4 nm/s for a-Si:H film and 1.5 nm/s for the ${\mu}c$-Si:H film), the controllable crystallinity (~70%) for the ${\mu}c$-Si:H film, and the relatively good uniformity (1% for a-Si:H film and 7% for the ${\mu}c$-Si:H film) can be obtained at the high frequency of 40 MHz in the large-area discharge (280 mm${\times}$540 mm). Finally, we will discuss the issues in expanding the multi-electrode to the 8G class large-area plasma processing (2.2 m${\times}$2.4 m) and in improving the process efficiency.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.295-305
• /
• 2013

Purpose: Recent research showed that total mixed ration (TMR) feeding for pigs improved the productivity and reduced feed cost and manure odor. An automatic TMR feeding system was developed for this study because the conventional feeder cannot deliver the TMR containing roughage. Methods: Conventional feeding systems and physical properties of TMR were surveyed, and performance tests of the conventional feeder were conducted to develop a TMR feeder. Based on the TMR feeder was developed and installed, driving, measuring weight, radio frequency identification (RFID) reading, and discharging test for feeding were conducted to ensure the performance. Results: Moisture content, density, and angle of repose of the TMR 1 (mixture of 30% cut IRG silage and 70% concentrates) were 31.6%, 387 $kg/m^3$, and $51^{\circ}$, respectively. Moisture content, density, and angle of repose of the TMR 2 (mixture of 45% concentrates, 30% cut IRG silage and by-products, 10% bean curd refuse, 10% others, and 5% fermenter) were 22.2%, 544 $kg/m^3$, and $50^{\circ}$, respectively. The coefficient of variation (C.V.) of conventional concentrate feeding were 1.9~4.1%, and C.V. of TMR containing 1~3% cut IRG roughage feeding by conventional feeder were 9~42%. The conventional disc type feeder was not suitable for TMR feeding because the supply unit was clogged. The C.V. of TMR 1 was 0.6~7.9% when 0.5~10 kg of the TMR supplied, and it was suitable for feeding grow-finish pigs and sows. On the contrary, the C.V. with TMR 2 was 28% when 0.5 kg of the TMR supplied, and it was not suitable for feeding sows. Conclusions: The TMR feeder developed in this study was suitable for feeding grow-finish pigs because the feeder performed stably with over 5.0 kg feed. However, the feeder showed a lack of accuracy for feeding sows because the amount of each feed was more than 0.5 kg per a feeding. Therefore, the improvement of outlet structure for accurate feeding is needed for sow feeding.

• Korean Journal of Digital Imaging in Medicine
• /
• v.17 no.1
• /
• pp.13-18
• /
• 2015

Purpose : Skip the repetitive HRCT axial scan in order to reduce the exposure of patients during chest HRCT scan, Helical Scan Data into a reconstructed image, and exposure of the patient change and visually evaluate the usefulness of the HRCT images. Materials and method : Patients were enrolled in the survey are 50 people who underwent chest CT scans of patients who presented to the hospital from January 2015 to March 2015. 50 people surveyed 22 people men and 28 people women people showed an average distribution of 30 to 80 years age was 48 years. 50 patients to Somatom Sensation 64 ch (Siemens) model with 120 kVp tube voltage to a reference mAs tube current to mAs (Care dose, Siemens) as a whole, including the lungs and the chest CT scan was performed. Scan upon each patient CARE dose 4D (Automatic exposure control, Siemens Medical Solution Erlangen, Germany) was to maintain the proper radiation dose scan every cross-section through a device that automatically adjusts the tube current of. CT scan is the rotation time of the Tube slice collimation, slice width 0.6 mm, pitch factor was made under the terms of 1.4. CT scan obtained after the raw data (raw data) to the upper surface of the axial images and coronal images for each slice thickness 1 mm, 5 mm intervals in the high spatial frequency calculation method (hight spatial resolution algorithm, B60 sharp) was the use of the lung window center -500 HU, windows were reconstructed into images in the interval -1000 HU to see. Result : 1. Measure the total value of DLP 50 patients who proceed to chest CT group A (Helical Scan after scan performed with HRCT) and group B (Helical Scan after the HR image reconstruction to the original data) compared with the group divided, analysis As a result of the age, but show little difference for each age group it had a decreased average dose of about 9%. 2. A Radiation read the results of the two Radiologist and a doctor upper lobe and middle lobe of the lung takes effect the visual evaluation is not a big difference between the two images both, depending on the age of the patient, especially if the blood vessels of the lower lobe (A: 3.4, B: 4.6) and bronchi(A: 3.8, B4.7) image shake caused by breathing in anxiety (blurring lead) to the original data (raw data) showed that the reconstructed image is been more useful in diagnostic terms. Conclusion : Scan was confirmed a continuous, rapid motion video to get Helical scan is much lower lobe lung reduction in visual blurring, Helical scan data to not repeat the examination by obtaining HRCT images reorganization reduced the exposure of the patient.