• Journal of Hydrogen and New Energy
• /
• v.22 no.3
• /
• pp.340-348
• /
• 2011

Effects of various inorganic-metal oxide (Zr, Zn, Si, Al and Ca as promoters and stabilizers) additive on the reduction rate of iron oxide and the composition of forming hydrogen using the steam-iron cycle operation was investigated. The reduction rate of redox agent with additive was determined from weight change by TGA. The changes of weight loss and reduction rate according to redox agent with various additive affected the hydrogen purity and cycle stability of the process. The cyclic micro reactor showed that hydrogen purity exceeding 95% could be obtained by the water splitting with Si/Fe, Zn/Fe, Zr/Fe redox agents. The redox agents with these elements had an affect on redox cycle stability as a good stabilizer for forming hydrogen by the steam-iron process.

• Current Photovoltaic Research
• /
• v.2 no.1
• /
• pp.18-27
• /
• 2014

Dye-sensitized solar cells (DSSCs), developed two decades ago, are considered to be an attractive technology among various photovoltaic devices because of their low cost, accessible dye chemistry, ease of fabrication, high power conversion efficiency, and environmentally friendly nature. A typical DSSCs consists of a dye-coated $TiO_2$ photoanode, a redox electrolyte, and a platinum (Pt)-coated fluorine-doped tin oxide (FTO) counter electrode. Among them, redox electrolytes have proven to be extremely important in improving the performance of DSSCs. Due to many drawbacks of iodide electrolytes, many research groups have paid more attention to seeking other alternative electrolyte systems. With regard to this, one-electron outer sphere redox shuttles based on cobalt complexes have shown promising results: In 2014, porphyrin dye (SM315) with the cobalt (II/III) redox couple exhibited a power conversion efficiency of 13% in DSSCs. In this review, we will provide an overview and perspectives of cobalt redox electrolytes in DSSCs.

• Microbiology and Biotechnology Letters
• /
• v.26 no.2
• /
• pp.167-172
• /
• 1998

In batch cultures of Brevibacterium ketoglutamicum for the L-ornithine production in which the pH and dissolved oxygen concentration were regulated constant, the profiles of redox potential were observed in parallel with the profiles of state variables such as cell, glucose, and ornithine concentrations. It was found that the redox potential had a close relationship with cell concentration and was also affected by ornithine concentration. The effects of ornithine and glucose on redox potential were examined in a separate series of experiments. Based on the experimental results, a correlation of redox potential to glucose, cell and ornithine concentrations has been proposed. The proposed correlation can be used for on-line estimation of ornithine concentration from on-line data of redox potential, glucose concentration, and cell concentration.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.3
• /
• pp.441-448
• /
• 2016

Heavy metal removal study is conducted from synthetic waste water by reduction and oxidation(redox) reaction of Cu-Zn metal alloy and adsorption reaction of aluminium silicate. Heavy metal whose ionization tendency is smaller than zinc are reducted in an aqueous solution, and the concentration of ionized zinc is reduced by adsorption reaction. The average diameter of metal alloy micro fiber is about $200{\mu}m$, and the surface area is wide enough to get equilibrium in a single cycle treatment. A single cycle treatment of redox reaction of Cu-Zn metal alloy, could remove 100.0 % of Cr(III), 98.0 % of Hg, 92.0 % of Sn and 91.4 % of Cu respectively. An ionization tendency of chromium is very close to zinc, but removal efficiency of chromium by redox reaction is significant. This result shows that trivalent chromium ion is expected to generate hydroxide precipitation with $OH^-$ ion generated by redox reaction. Zinc ion generated by redox reaction is readily removed by adsorption reaction of aluminium silicate in a single cycle treatment. Other heavy metal components which are not perfectly removed by redox reaction also showed very high removal efficiency of 98.0 % or more by adsorption reaction. Aluminium ion is not increased by adsorption reaction of aluminium silicate. That means heavy metal ion removal mechanism by adsorption reaction is turned out to be not an ion exchange reaction, but an adsorption reaction.

• Korean Journal of Materials Research
• /
• v.22 no.9
• /
• pp.445-449
• /
• 2012

We investigate the effects of redox reaction on preparation of high purity ${\alpha}$-alumina from selectively ground aluminum dross. Preparation procedure of the ${\alpha}$-alumina from the aluminum dross has four steps: i) selective crushing and grinding, ii) leaching process, iii) redox reaction, and iv) precipitation reaction under controlled pH. Aluminum dross supplied from a smelter was ground to separate metallic aluminum. After the separation, the recovered particles were treated with hydrochloric acid(HCl) to leach aluminum as aluminum chloride solution. Then, the aluminum chloride solution was applied to a redox reaction with hydrogen peroxide($H_2O_2$). The pH value of the solution was controlled by addition of ammonia to obtain aluminum hydroxide and to remove other impurities. Then, the obtained aluminum hydroxide was dried at $60^{\circ}C$ and heat-treated at $1300^{\circ}C$ to form ${\alpha}$-alumina. Aluminum dross was found to contain a complex mixture of aluminum metal, aluminum oxide, aluminum nitride, and spinel compounds. Regardless of introduction of the redox reaction, both of the sintered products are composed mainly of ${\alpha}$-alumina. There were fewer impurities in the solution subject to the redox reaction than there were in the solution that was not subject to the redox reaction. The impurities were precipitated by pH control with ammonia solution, and then removed. We can obtain aluminum hydroxide with high purity through control of pH after the redox reaction. Thus, pH control brings a synthesis of ${\alpha}$-alumina with fewer impurities after the redox reaction. Consequently, high purity ${\alpha}$-alumina from aluminum dross can be fabricated through the process by redox reaction.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.1
• /
• pp.25-36
• /
• 2020

In a redox transition zone, geochemical reactions are facilitated by active bacteria that mediate reactions involving electrons, and arsenic (As) and iron (Fe) cycles are the major electron transfer reactions occurring at such a site. In this study, the effect of repetitive redox changes on soil bacterial community in As-contaminated soil was investigated. The results revealed that bacterial community changed actively in response to redox changes, and bacterial diversity gradually decreased as the cycle repeated. Proportion of strict aerobes and anaerobes decreased, while microaerophilic species such as Azospirillum oryzae group became the predominant species, accounting for 72.7% of the total counts after four weeks of incubation. Bacterial species capable of reducing Fe or As (e.g., Clostridium, Desulfitobacterium) belonging to diverse phylogenetic groups were detected. Indices representing richness (i.e., Chao 1) and phylogenetic diversity decreased from 1,868 and 1,926 to 848 and 1,121, respectively. Principle component analysis suggests that repetitive redox fluctuation, rather than oxic or anoxic status itself, is an important factor in determining the change of soil bacterial community, which in turn affects the cycling of As and Fe in redox transition zones.

• Microbiology and Biotechnology Letters
• /
• v.35 no.1
• /
• pp.36-40
• /
• 2007

Redox signaling is one of way to regulate growth and death of cell in response to change of redox of proteins. To search whether translation is regulated by redox, we attempted in vitro translation assay under condition with or without DTT. Interestingly in vitro translation activity was increased up to 40% In the presence of dithiothreitol (DTT). Then we checked whether this positive effect by DTT was further accelerated by addition of thioredoxin (Trx). When a Trx purified from Saccharomyces cerevisiae was added to the in vitro translation extract, we observed a dose-dependent increase in translational activity. These results suggest the possibility of translation factors being redox-regulated via Trx in vivo.

• Microbiology and Biotechnology Letters
• /
• v.19 no.1
• /
• pp.76-81
• /
• 1991

- The effect of redox potential (ORP) on lysine production by a leucine auxotrophic regulatory mutant of Corynebacterium glutclmicum on molasses medium was investigated in a 2-1 jar fermentor at pH 6.9 and $32^{\circ}C$. At a dilution rate of D=O.l $h ^1$, a maximum yield of Yr,,s=0.24 was obtained in either carbon- or leucine-limited chemostat where the redox potential was between -60 mV and - 100 mV. This level of redox potential corresponded to moderate oxygen deficiency. Under a high oxygen deficient condition of the redox potential of - 130 rnV (oxygen-limited chemostat), all the kinetic parameters such as $Y_[p/s}, q_s\; and \; q_p$ were decreased significantly and significant amounts of byproducts including glycine, alanine and valine were accumulated in the culture, indicating that the control of redox potential is important in lysine fermentation. At the redox potential of - 40 mV, on the other hand, large quantities of arginine (up to 0.38g/l) and glutamic acid (up to 0.12 g/l) were produced. A maximum lysine productivity of 2.41 g/l/h was achieved at - 66 mV under a carbon-limited condition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.365-365
• /
• 2016

3차원 갭 소자를 제작하고, 제작된 소자를 백시니아 바이러스의 전기화학적 검출에 이용하였다. 3차원 갭 전극은 하층 전극에 포토레지스트를 코팅하여 지지층을 형성한 후, 상층 전극을 부착을 통해 제작하였다. 상하층 전극사이로 분석물질인 ferricynide가 이동 할 수 있도록 유체채널을 도입하였고, 상하층 전극에 각각 산화, 환원 전위를 인가하여 ferricyanide/ferrocyanide에 의한 redox cycling이 일어나는 것을 확인하였다. 이 때, 발생한 redox 신호는 2차원 갭에서의 redox 신호와 비교했을 때 월등히 큰 것을 알 수 있었으며, 증폭된 redox 신호를 기반으로 백시니아 바이러스의 검출에 활용하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.364.2-364.2
• /
• 2016

본 연구에서는 3차원 갭 전극을 제작하고 이에 유체채널을 도입하여 전기화학적 분석을 수행하였다. 제작된 3차원 갭 전극은 전극의 배치가 상/하로 이루어져 있으며 전극 사이에는 포토레지스트가 간격을 유지하기 위해 코팅되었다. 상하층 전극사이로 분석물질인 ferricynide가 이동 할 수 있도록 유체채널을 도입하였고, 상하층 전극에 각각 산화, 환원 전위를 인가하면 ferricyanide/ferrocyanide에 의한 redox cycling이 일어나는 것을 확인 하였다. 이 때, 발생한 redox 신호는 2차원 갭에서의 redox 신호와 비교했을 때 월등히 큰 것을 확인하였으며, 증폭된 redox 신호를 기반으로 백시니아 바이러스의 검출 연구에 활용하였다.