• 한국수소및신에너지학회논문집
• /
• 제23권5호
• /
• pp.421-428
• /
• 2012

The Sulfur-Iodine (SI) thermochemical hydrogen production process is one of the most promising thermochemical water splitting technologies. In the integrated operation of the SI process, the $O_2$ produced from a $H_2SO_4$ decomposition section could be supplied directly to the Bunsen reaction section without preliminary separation. A $HI_x$ ($I_2+HI+H_2O$) solution could be also provided as the reactants in a Bunsen reaction section, since the sole separation of $I_2$ in a $HI_x$ solution recycled from a HI decomposition section was very difficult. Therefore, the Bunsen reaction using $SO_2-O_2$ mixture gases in the presence of the $HI_x$ solution was carried out to identify the effect of $O_2$. The amount of $I_2$ unreacted under the feed of $SO_2-O_2$ mixture gases was little higher than that under the feed of $SO_2$ gas only, and the amount of HI produced was relatively decreased. The $O_2$ in $SO_2-O_2$ mixture gases also played a role to decrease the amount of a impurity in $HI_x$ phase by only striping effect, while that in $H_2SO_4$ phase was hardly affected.

• 자원리싸이클링
• /
• 제11권6호
• /
• pp.31-37
• /
• 2002

폐알루미늄 캔으로 제조된 2차지금과 신지금의 혼합비율에 따라 캔용 소재를 주조하고 미세조직을 조사하였다. 또한 주조후 열처리에 따른 상변화의 거동을 조사하였다. 2차지금의 혼합비율(20, 30, 40, 50, 60%)에 따라 캔용 소재를 전기로로 용해하고, ceramic filter를 사용하여 주조하였다. 주조후에는 주조조직 제어를 위해 균질화 열처리($615^{\circ}C$$\times$10hrs)를 하였다. 주조상태에서는 $\alpha$ 상($Al_{12}$ $(Fe,Mn)_3$Si), $\beta$상($Al_{6}$/(Fe,Mn)), 그리고 미세한 $Mg_2$Si상이 알루미늄 기지에 존재하며, 특히 가공성에 나쁜 영향을 미치는 것으로 알려진 $\beta$상이 많이 존재하였다. 그러나 균질화 열처리에 의해 이러한 $\beta$상은 유해성이 없는 $\alpha$상으로의 상변태가 일어났다. 기지내의 미세한 $Mg_2$Si상도 열처리에 의해 $\alpha$상으로 변화하였다. 주조시 여과된 조직을 분석한 결과 Fe, Cu, Si 등의 금속간화합물이 검출되었다.

• 콘크리트학회논문집
• /
• 제13권2호
• /
• pp.184-191
• /
• 2001

최근 급속한 산업화 및 생활수준의 향상에 따라 폐유리의 발생량이 급격히 증대하고 있으며 이중 대부분은 재활용되지 못하고 최종처분 되고 있어 심각한 자원낭비 및 환경오염문제를 야기하고 있다. 따라서 본 연구에서는 국내에서 발생되고 있는 폐유리중 대표적인 갈색, 녹색, 무색 폐유리 및 이들을 혼합한 폐유리를 파쇄하여 콘크리트용 잔골재로서의 재활용 가능성을 분석하기 위한 기초적 실험연구를 수행하였다. 시험결과 슬럼프 및 다짐계수는 폐유리 잔골재의 입형이 모가나고 각이져 있고 상대적으로 유리입도가 잔골재보다 크기때문에 감소하였으며, 공기량은 폐유리 잔골재가 0.6mm이상의 입자를 많이 함유하고 있어 증가하는 것으로 나타났다. 또한 압축강도, 인장강도, 휨강도는 폐유리 잔골재의 혼입량이 많아질수록 감소하였으며, 적정 혼입률은 30% 이하가 바람직하고 유동성 확보를 위해서는 적정한 혼화제를 사용해야 한다는 결론을 얻을 수 있었다.

• 한국건설순환자원학회논문집
• /
• 제4권4호
• /
• pp.388-395
• /
• 2016

본 논문에서는 폐수슬러지에서 제조된 재활용 이산화티탄($TiO_2$)을 혼입한 시멘트 모르타르의 NOx 저감 성능에 대해 고찰하였다. 일반적으로, 이산화티탄은 클러스터 형태로 입자가 붙어 있어, 시멘트의 응결과 경화 전에 타설체 하면에 침강하는 특징이 있다. 그 결과로 타설체의 상면과 하면에는 이산화티탄의 분포도가 서로 상당한 차이를 나타내고, 광촉매 효과도 하면에서 우수하게 나타난다. 건물이나 주택과 같은 건축구조물에서는 이를 해결하기 위해, 이산화티탄을 혼입한 프리캐스트 제품을 미리 제작 후, 조립 시에는 타설 시 상면과 하면을 뒤집어 거치하여 상대적으로 높은 이산화티탄 분포면을 대기에 노출시키는 방식을 사용한다. 그러나 콘크리트 도로포장과 같은 현장 타설의 경우, 상면과 하면을 뒤집어 거치할 수 없기 때문에 이산화티탄의 분산성은 중요하다. 이를 개선시키기 위한 본 논문의 결과로 실리카퓸, 고성능감수제, 증점제, 고로슬래그 등 전형적인 시멘트성 재료의 분산에 기여하는 재료는 이산화티탄 클러스터의 분산효과에 미미한 영향을 주었다. 급결제, 발포제, 작은 크기의 잔골재의 조합이 이산화티탄 클러스터의 분산성을 개선하였다. 분산성 개선에도 불구하고, 타설체 상면과 하면의 NOx 제거효율은 하면에 큰 효율을 지속적으로 나타내었고, 이는 표면에 분포하는 공극량에 따라 달라지는 것을 디지털 표면 이미지 분석을 통하여 확인하였다. 많은 공극분포를 갖는 표면은 상대적으로 매끄러운 표면에 비해 NO가스 흡착을 기본적으로 높이게 되고, 이를 기준으로 상대적인 NOx 제거효율이 높아지는 것으로 사료된다.

• Asian Journal of Atmospheric Environment
• /
• 제10권4호
• /
• pp.226-231
• /
• 2016

In order to remove fog often causes various troubles in our daily lives, the novel defog blower equipped the roller brush made of recycled horse's mane hair was developed. This work presents the overview of new defog devices and the experimental data obtained at two different kinds of defogging experiments. In the model experiment carried out at the enclosed cleanroom ($W5.9m{\times}L5.1m{\times}H2.4m$) targeted a vinyl house, fog was dissipated in less than 30 seconds in case with wind entrainment and two minutes 45 seconds in case without wind entrainment after running of the newly designed defog blower. When the demisting blower was run in a duct, it has an excellent mist sweeping qualities as well as a great removal effect for the background particles (89.5% and 65.4% scavenging rates for fine and coarse particles, respectively). It can be therefore said that the mist eliminator presented in this paper is ideal for use in the sealing space like a vinyl house and the industrial sites where required to remove both harmful mist and particle.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.57-58
• /
• 2015

In this research the processing method of Desulfurized Plaster is changed to cyclotomy, 0.3mm sieve analysis and 500℃ heat exposure, and by changing the mix rate of the binding agent to 0~20%, it was applied to mortar that used cyclic aggregate and blast furnace slag for testing. The test results showed that the flow decreased in the order of cyclotomy, high heat exposure, and sieve analysis according to the mix rate of FGD, and while the air volume decreased for cyclotomy, it was shown to have almost no effect on sieve analysis and high heat exposure. The setting time accelerated as the mixing rate of FGD increased, and the compression strength increased as the mixing rate of FGD increased and especially showed a high trend with cyclotomy and sieve analysis.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.55-56
• /
• 2015

In this research the processing method of Desulfurized Plaster is changed to cyclotomy, 0.3mm sieve analysis and 500℃ heat exposure, and by changing the mix rate of the binding agent to 0~20%, it was applied to mortar that used natural aggregate and blast furnace slag for testing. The test results showed that the sieve analysis and high heat exposure of the flow and air volume increased according to the increase of mixing rate of FGD while the cyclotomy decreased. The setting time accelerated as the mixing rate of FGD increased, and the compression strength increased to its maximum when the mixing rate of FGD was right around 10%, and especially showed a high trend with cyclotomy and sieve analysis.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.250-251
• /
• 2014

With the recent movement toward sustainable development, many efforts have been made to reduce environmental loads in various domains of industry. In particular, a great deal of research and technology development has been underway on approaches to reducing industrial waste and the emission of greenhouse gases. For this reason, a quantitative analysis of the reduction in CO₂ emission that could be achieved by replacing limestone material with cementitious waste powder was performed in this study. Through the analysis, it was found that CO₂ emissions were reduced by up to 50 percent compared with the scenario in which OPC was used, which suggests that it is possible to reduce global CO₂ emissions by approximately 5percent, or by 446.4 Tg of the 965 Tg of CO₂ emissions generated by the cement industry, in the total global CO₂ emissions of 19300Tg.

• 한국가구학회지
• /
• 제27권2호
• /
• pp.80-90
• /
• 2016

The idea of Sustainable, first mentioned in "Our Future (Bruntdland)" from the United Nations report released in 1987 has been highly affect design disciplines in developed countries in 21st century. It relocated industrial society and structure's attentions to nature and recourse conservation and reuse. Designed and manufactured products eventually disposed and it leads to waste of resources as well as creates environmental issues. Unfortunately, vast majority of designers starts designing without anticipation of this matter and produce more believing this leads to more sales. However shorter life of a product will create bigger increase of resource consumption and waste than, importance of re-usage and recycle will eventually increase. In modern furniture industry metal and plastics are frequently used beside wood that material has been diverse than in past. However, there are lack of plans and regulations of re-usage of those material due to difficulties of separating each different materials and collecting due to it's size. This study would like to look into recycling rate, methods and usage of three major materials (wood, metal, plastic) that is typically used in current furniture industries. Furthermore, see the potential of sustainable furniture by analyzing furniture practices made by each different recycled material from old furniture and what designers should consider to achieve feasibility of sustainable furniture.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권4호
• /
• pp.8-11
• /
• 2009

This study introduced wastewater treatment method by High Gradient Magnetic Separation (HGMS). HGMS treatment was high efficient method for various industrial wastewaters. The system is currently research state, but we have surveyed commercialize the technology for industry. In rolling plate process, coolant wastewater was recycled by sedimentation and sand filter system. It needs several large reservoirs and long time to remove suspended solid (SS) like metal fines and iron oxide in hot rolling plate making process. If removing rate of suspended solid in rolling coolant wastewater is improved by using HGMS system, the productivity of working process can be increased and the area of reservoir can be reduced. We manufactured high temperature superconducting HGMS system that had a purpose to treatment of coolant wastewater in rolling plate process. We fabricated the prototypes of magnetic matrix filter consisting of stainless steel 430 mesh, which is a core component in the magnetic separation system, In our basic preliminary experiment using HGMS system, it has been clear that the fine paramagnetic particles in the coolant wastewater obtained from rolling plate process of POSCO can be separated with high efficiency.