• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.77-82
• /
• 2003

The purpose of this study is development of technique to use cementitious powder as recycle cement produced from deteriorated Concrete waste which has a large quantity of calcium carbonate. Therefore, after having theoretical consideration based on the properties of hish-heated concrete and concerning about neutralization of Concrete, we analysis chemical properties of ingredients of cementitious powder After making origin cement paste, then processing the accelerated carbonation, we consider the properties of hydration and chemical properties of cementitious powder under various temperature conditions As a result of the thermal analysis, the CacO3 content of cementitious powder would affect decision of heat temperature to recover its hydrated ability because CacO3 content is increased when neutraliTation is preBlessed. And as a result of XRD analysis. in case of origin powder of non-neutralized paste, CaO peak is found at $700^{\circ}C$. but, heat temperature to generate CaO would increase when the content of neutralized ingredients is increased. Finally, recycle cement heated at $700^{\circ}C$ shows the best compressive strength when the content of neutralized ingredients in recycle cement is less then 50%. However, it would be quite difficult to manage quality of recycle cement according to recycling points of various concrete waste.

• Journal of the Korean Professional Engineers Association
• /
• v.33 no.3
• /
• pp.35-36
• /
• 2000

The waste management system has become social problem all over the world since it is too much to control the waste generated during the economic development. Therefore Human being should minimize the dispersion of useful materials on the earth which is limited by means of recycle and reuse, and should maximize the use of solar energy which is almost infinite.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.638-641
• /
• 2004

This study suggests the optimum deconstruction management system for minimizing construction waste and increasing reuse and recycle rate of material to be different from traditional demolition. The purpose of this system is to minimize environmental damages and reduce construction waste quantity of a country by planning and operating preliminarily estimation of demolition quantity, demolition methods of each structural elements and reuse or recycle methods of C&D waste. This system is consist of four modules such as planning of preliminary demolition survey, estimating of demolition quantity, planning of demolition schedule and planning of construction waste management, and these all modules can be used individually module according to user's utilization purpose.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.3
• /
• pp.219-238
• /
• 2014

This study attempted to investigate present condition and product planning of global eco-fashion brands that harmonize fashion and sustainability. As research subjects, this study selected 97 oversea fashion brands mentioned in books related to eco-fashion, Black(2011), Brown(2010), Fuad-luke(2009). As for research methods, materials and ethical practices of these selected 97 brands through literature data and their internet site homepages. This study analyzed oversea eco-brands collected 26 British brands, 22 American brands, 36 European brands such as Germany, France, Italy, Sweden, Spain, Finland and so on, except Britain and 13 other regions including Japan, India, Canada, Mexico, and New zealand. In conclusion, the product planning characteristics of these oversea eco-fashion brands can be summarized as follows; community and fair trade, ecological and slow design, recycle, reuse, redesign, and new eco-models. Firstly, brands of 'community and fair trade' manufactured products through fair trade and local community's artisan by ethical practices with organic fabrics. Secondly, brands of 'ecological and slow design' pursued timeless design and multi-functional design as luxury eco-fashion styles. They used organic textiles, hemp, bamboo, soya, tencell, sea cell, and self-sustaining plants. Thirdly, brands of 'recycle, reuse, redesign' aimed for upcycling high-end fashion and used vintage clothes, textile scraps, PET, parachutes, tires, safety belts, advertising banner and so on. In addition, brands of 'new models as eco-fashion' suggested zero-waste cutting, recycling over-printing technology, new sustainable business model, and ethical practices in the supply chain of the fashion industry.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.3
• /
• pp.13-21
• /
• 2009

Pulp and paper industry is a typical plant industry which usually consume lots of water and energy. Recently, environmental issues have become more important due to climate changes around the world, and reinforcement in the regulatory content in transfer and management of chemical material and that in environmental regulations for waste water and air. Paper industry is a source material recycle industry which recycle or reuse waste paper, recyclable wood, planned plantation or lumber from thinning and waste wood. Hence it can be said that paper industry is the representative industry for earth environment and of 21th century.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.1
• /
• pp.45-63
• /
• 2017

The oldest commercial reactor in South Korea, Kori-1 Nuclear Power Plant (NPP), will be shut down in 2017. Proper treatment for decommissioning wastes is one of the key factors to decommission a plant successfully. Particularly important is the recycling of clearance level or very low level radioactively contaminated metallic wastes, which contributes to waste minimization and the reduction of disposal volume. The aim of this study is to introduce a conceptual design of a recycle system and to evaluate the doses incurred through defined work flows. The various architecture diagrams were organized to define operational procedures and tasks. Potential exposure scenarios were selected in accordance with the recycle system, and the doses were evaluated with the RESRAD-RECYCLE computer code. By using this tool, the important scenarios and radionuclides as well as impacts of radionuclide characteristics and partitioning factors are analyzed. Moreover, dose analysis can be used to provide information on the necessary decontamination, radiation protection process, and allowable concentration limits for exposure scenarios.

• Journal of Environmental Impact Assessment
• /
• v.21 no.1
• /
• pp.63-69
• /
• 2012

Sediment has been increasingly acknowledged as a carrier in water system and an available contamination. For this reason, dredging of sediment in reservoir to remediate water quality and secure storage capacity is conducted annually. However, disposal of numerous dredged sediment is necessary as a secondary problem. Currently, in Korea, dredged sediment is classified as waste to be reclamated or recycled into sandy soil, however, they are still in trouble because of spacial and environmental problem. Therefore, rather than simple disposal or reuse into sandy soil, it is necessary to research on method to manage main cause of pollution and increase the value as a resource. In this study, we intend to develop a recycle technology for numerous dredged sediment produced by dredging in deteriorated reservoirs using solidificator (stabilizer). To achieve this, we will consider utilization of dredged sediment and evaluation of use possibility as natural recycle by analysis the characteristics of soil-solidificator mixture in terms of physicochemical properties and the mixing ratio between sediment and solidificator.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.69-72
• /
• 2005

Recently, there have been many studies seeking towards the utilization of cementitious powder from concrete waste as recycle cement. However, most of the studies actually have been researches about the reuse of mortar or paste, not concrete waste. In fact, either mortar or paste is quite different from a real concrete waste in terms of age and mixture. Thus the purpose of this study is to examine basic physical properties of recycle cement, manufactured with cementitious powder from concrete waste, and analyze differences in chemical and hydraulic properties of the cement and its tested model. As a result of the chemicai analysis, recycle cement is composed mainly of CaO and SiO2, and that it is even lower in the content of CaO than Portland cement, which is also supported by previous studies. But, Differently from previous studies, plastic working at the temperature of 650 was found an optimal condition under which cementitious powder from concrete waste could restore its hydraulic properties.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.1
• /
• pp.79-92
• /
• 2004

The purpose of this study is to examine the actual condition of environment conscious logistic system which is essential to make material recycling economic society. Environment conscious logistic management which meant simply recycle is tend to promote material reduction, reuse and recycling. We have made case studies about advanced environment friendly logistic system. To examine Korean companies' environment conscious logistic system, we made survey form which is consist of 82 questionnaires and 154 companies have participated for this. And we have analyzed the survey responses. As a result of this study, we propose the way of constructing environment conscious logistic system in Korea.

• Journal of Korean Institute of Industrial Engineers
• /
• v.22 no.4
• /
• pp.589-605
• /
• 1996

Recycling of used products and components has been considered as one of promising strategies for resolving environmental problems. In this respect, most manufacturing companies begin to consider possible recycling (e.q., reuse or re-production) of the components contained in their products. The primary objective of this research is to develop a multiple criteria decision making model for systematic management of recycle-oriented manufacturing components. The production planning problem of recycle-oriented manufacturing components is first formulated as a multiobjective mixed 0-1 integer programming model with three conflicting objectives. An interactive multiple criteria decision making method is then developed for solving the mathematical model. Also, an Input/Output analysis software is developed to help practitioners apply the model to real problems without much knowledge on computers and mathematical programming. A numerical example is used in examining the validity of the proposed model and to investigate the impact of the input variables on recycling production strategy.