• Journal of Power Electronics
• /
• v.8 no.4
• /
• pp.354-362
• /
• 2008

This paper presents neural load torque compensation method which is composed of a deadbeat load torque observer and gains compensation by a parameter estimator. As a result, the response of the PMSM (permanent magnet synchronous motor) obtains better precision position control. To reduce the noise effect, the post-filter is implemented by a MA (moving average) process. The parameter compensator with an RLSM (recursive least square method) parameter estimator is adopted to increase the performance of the load torque observer and main controller. The parameter estimator is combined with a high performance neural load torque observer to resolve problems. The neural network is trained in online phases and it is composed by a feed forward recall and error back-propagation training. During normal operation, the input-output response is sampled and the weighting value is trained multi-times by the error back-propagation method at each sample period to accommodate the possible variations in the parameters or load torque. As a result, the proposed control system has a robust and precise system against load torque and parameter variation. Stability and usefulness are verified by computer simulation and experiment.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.1958-1960
• /
• 2001

In this paper, we propose the design methodology of target tracking system using the identification of TS fuzzy model based on genetic algorithm(GA) and RLS algorithm. In general, the objective of target tracking is to estimate the future trajectory of the target based on the past position of the target obtained from the sensor. In the conventional and mathematical nonlinear filtering method such as extended Kalman filter(EKF), the performance of the system may be deteriorated in highly nonlinear situation. In this paper, to resolve these problems of nonlinear filtering technique, the error of EKF by nonlinearity is compensated by identifying TS fuzzy model. In the proposed method, after composing training datum from the parameters of EKF, by identifying the premise and consequent parameters and the rule numbers of TS fuzzy model using GA, and by tuning finely the consequent parameters of TS fuzzy model using recursive least square(RLS) algorithm, the error of EKF is compensated. Finally, the proposed method is applied to three dimensional tracking problem, and the simulation results shows that the tracking performance is improved by the proposed method.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.3
• /
• pp.188-195
• /
• 2004

This paper presents neural load torque observer that is used to deadbeat load torque observer and gain compensation by parameter estimator As a result, the response of the PMSM(permanent magnet synchronous motor) follows that nominal plant. The load torque compensation method is composed of a neural deadbeat observer To reduce the noise effect, the post-filter implemented by MA(moving average) process, is adopted. The parameter compensator with RLSM (recursive least square method) parameter estimator is adopted to increase the performance of the load torque observer and main controller The parameter estimator is combined with a high performance neural load torque observer to resolve the problems. The neural network is trained in on-line phases and it is composed by a feed forward recall and error back-propagation training. During the normal operation, the input-output response is sampled and the weighting value is trained multi-times by error back-propagation method at each sample period to accommodate the possible variations in the parameters or load torque. As a result, the proposed control system has a robust and precise system against the load torque and the Parameter variation. A stability and usefulness are verified by computer simulation and experiment.

• Journal of Advanced Navigation Technology
• /
• v.5 no.2
• /
• pp.111-122
• /
• 2001

In this paper, we study the performance of eigencanceller which use a eigenvector and eigenvalue in order to update a weighter vector. Eigencanceller can suppress directional interferences and noise effectively while maintaining specified beam pattern constraints. The constraints and optimal weight vector of eigencanceller vary by using interference and noise or desired signal, interference signal and noise as array input signal. From the analysis results in the steady state, We show that weight vectors in each case are simplified the form of projection equation that belongs to desired subspace orthogonal to interference subspace and eigencanceller has the better performance than RLS method through mathematical analysis and simulation.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.22-33
• /
• 1999

This paper presents the method for the automatic tuning of a design weighting polynomial parameters of a generalized minimum-variance stochastic ultivariable self-tuning controller which adapts to changes in the higher order nonminimum phase system parameters with time delays and noises. The self-tuning effect is achieved through the recursive least square algorithm at the parameter estimation stage and also through the Robbins-Monro algorithm at the stage of optimizing the design weighting polynomial parameters of the controller. The proposed multivariable self-tuning method is simple and effective compared with pole restriction method. The computer simulation results are presented to adapt the higher order multivariable system with nonminimum phase and with changeable system parameters.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.5
• /
• pp.83-93
• /
• 1996

In this paper, a minimum variance control system is proposed and practically implemented, which is adequate to the induction motor speed control system with frequent load variation. Minimum variance control method is used as a control law and recursive least square method with selective forgetting factor is proposed and analyzed with general forgetting algorithm as an estimation method. Designed control system is based on PC-DSP structure for the purposed of easiness of applying adaptive algorithm. Through computer simulation and experimental results, it is verified that proposed control system is robust to the load variation and practical implementation is possible.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.455-458
• /
• 2002

A control of the body posture and movement is maintained by the vestibular system, vision, and proprioceptors. Especially, vestibular system has a very important function that controls the eye movement through vestibuloocular reflex and contraction of skeletal muscles through vestibulospinal reflex. However, postural disturbance caused by loss of vestibular function results in nausea, vomiting, vertigo and loss of craving for life. Lose of vestibular function leads to abnormal reflex of eye movements named nystagmus. Analysis of the nystagmus is needed to diagnose the vertigo, which is performed by means of electronystagmography (ENG). The purpose of this study is to develop a computerized system for data processing and an algorithm for the automatic evaluation of the slow component velocity (SCV) of nystagmus Induced by optokinetic(OKN) stimulation system. A new algorithm using recursive least square method (RLSM) to detect SCV of nystagmus is suggested in this paper. This method allows a fast and precise evaluation of the nystagmus, through artifact rejection techniques. The results are depicted in this paper.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.1
• /
• pp.42-49
• /
• 2004

This paper presents a new method of external load disturbance compensation using deadbeat load torque observer and gain compensation by parameter estimator. The response of the permanent magnet synchronous motor(PMSM) follows the nominal plant. The load torque compensation method is composed of a deadbeat observer. To reduce the noise effect, the post-filter implemented by moving average(MA) process is adopted. The parameter compensator with recursive least square method(RLSM) parameter estimator is suggested to make the new system work as same as the name plate system which in used to take gains. The proposed estimator is combined with a high performance load torque observer to resolve the problems. As a result, the proposed control system has a robust and precise system against the load torque and the parameter variation. A stability and usefulness are verified by computer simulation and experiment.

• Journal of Korean Society of Transportation
• /
• v.33 no.1
• /
• pp.61-69
• /
• 2015

This study compares the forecasting accuracy of five econometric models on domestic total freight volume in South Korea. Applied five models are as follows: Ordinary Least Square model, Partial Adjustment model, Reduced Autoregressive Distributed Lag model, Vector Autoregressive model, Time Varying Parameter model. Estimating models and forecasting are carried out based on annual data of domestic freight volume and an index of industrial production during 1970~2011. 1-year, 3-year, and 5-year ahead forecasting performance of five models was compared using the recursive forecasting method. Additionally, two forecasting periods were set to compare forecasting accuracy according to the size of future volatility. As a result, the Time Varying Parameter model showed the best accuracy for forecasting periods having fluctuations, whereas the Vector Autoregressive model showed better performance for forecasting periods with gradual changes.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.4
• /
• pp.66-72
• /
• 2003

In the present paper some fundamentals about exceeding the guard interval of an OFDM system is going to discuss and will introduce method to cancel a ISI and ICI effects. In this paper, the performance characteristics of robust OFDM receiving system algorithm that is composed of a channel estimator using recursive least square(RLS) algorithm in time domain and of a ISI and ICI replica and subtracter using the channel coefficients are presented. By computer simulation method, the effect of suppression of ISI and ICI is demonstrated and compared the BER performance with a conventional 1-tap equalized system. Especially the presented scheme improves the BER performance at low SNRs more or so compared with the conventional one-tap equalized receiving configuration.