• 환경생물
• /
• 제37권4호
• /
• pp.719-725
• /
• 2019

빈영양해수에서 배양하여 황백화를 유도한 김 엽체는 NO₃^- (300 μM)와 PO₄^3- (30 μM)를 공급하여 시간의 경과에 따른 회복 정도를 분석하였다. NO₃^- 공급 조건에서는 배양 2일 후부터 김 엽체의 회복이 나타났으며, PO₄^3- 공급 조건에서는 배양 5일 후부터 김 엽체의 회복이 관찰되었다. 색차계의 수치화 된 값들은 황백화 김 엽체의 회복을 판단하는데 유용하였다. 황백화 김은 무기영양분의 공급으로 비대한 액포가 축소되고, 색택이 회복되는 것으로 나타났다.

• 한국작물학회지
• /
• 제26권3호
• /
• pp.219-225
• /
• 1981

Strong wind of 6.5m/s from electric fan was applied to rice at heading stage to find out the nature of wind damage to panicle. Damaged panicles caused by typhoon were sampled out of field to measure the yield and milling components. Wind-treated glumes were developed into two forms, fertile and sterile, and each of them showed all degree of glume discoloration. The number of fertile grains were higher than sterile grains in a damaged panicle. Averagesdegree of glume discoloration was higher in not flowered glume than in flowered glume. The more recently flowered glumes resulted the higher degree of discoloration among flowered glume. The percent of sterile grain to total number of grains was the highest at stage of just flowering. The glume discoloration representing wind damage at heading state advanced in degree in ten days after treatment compared to that just after treatment. Grain length and grain width were decreased with the increased degree of glume discoloration, while grain thickness was not changed greatly. Chalkiness was a little higher in damaged grain than in normal grain without definite trends by degree of discoloration. Ripening ratio, 1000 grain weight and yield decreased with increased degree of glume discoloration in damaged panicle by typhoon. Decreasing order in yield was white rice, rough rice and brown rice. Ratio of brown rice to rough rice increased, white rice to brown rice decreased, and milling recovery was not changed greatly with increased degree of 히ume discoloration.

• Restorative Dentistry and Endodontics
• /
• 제35권6호
• /
• pp.492-496
• /
• 2010

치관부 변색은 외상당한 치아에서 종종 관찰되는 현상이다. 아탈구에서의 치관부 변색은, 외상의 정도가 근단공을 지나는 동맥혈관을 파열시키기에 충분히 강하지 않으나 얇은 외벽을 가진 모세혈관을 절단 또는 폐쇄 시키는 경우에서 일어날 수 있다고 설명된다. 감염이 일어나지 않는다면 치수 회복의 과정이 일어날 수 있으며 그에 따라 치관부 변색은 완전하게, 또는 불완전한 상태로 회복되기도 한다. 그러나 이러한 치관부의 색 변화로 치수 괴사를 진단하기에는 불충분하며, 불필요한 치료를 야기할 우려가 있다. 이번 증례는 전치부의 외상 후, 치관부 변색의 과정과 이의 회복을, 초음파 도플러 그라피를 통하여 확인한 것을 나타낸다. 통상적인 냉검사나 전기치수검사로 치수 생활력을 판단하기 어려운 외상 치아의 진단에 있어 초음파 도플러 그라피의 사용은 보다 정확한 정보를 제공할 수 있을 것으로 평가된다.

• 접착 및 계면
• /
• 제24권2호
• /
• pp.69-75
• /
• 2023

최근 자기복원(self-recovery) 코팅층을 가진 자동차용 도장면 보호필름의 적용이 증대되고 있다. 본 연구에서는 poly(urea-urethane) hybrid 자기복원 코팅층을 가진 poly(vinyl chloride) 기재 보호필름에 대한 기본 물성에 대한 평가 결과를 보고한다. Poly(urea-urethane) 기반 코팅층을 구성하고 있는 주요 화합물의 비율과 코팅층의 두께 변화에 따른 자기복원성능을 확인하였으며, 색차 값 측정을 통해 내오염성능을 정량화 하였다. 또한, 소수성 첨가제로 외부 오염에 대한 표면특성을 향상시키기 위하여, 소량의 실리콘계 반응형 첨가제를 코팅 조성물에 함량에 따른 easy-cleaning 효과와 접촉각을 확인하였다. 마지막으로, poly(urea-urethane) 자기복원 코팅층을 가진 보호필름의 장기간 사용에 따른 변색 및 변형에 대한 가능성을 확인하고자 촉진 내후성 평가를 진행하였다.

• 한국의류학회지
• /
• 제11권3호
• /
• pp.57-65
• /
• 1987

The purpose of this study was to investigate the optimum treatment [condition for the Durable press finish of viscose rayon fabrics. Three types of commercial N-methylol crosslinking agents were applied to the fabric utilizing the pad-dry-cure technique. Changes in physical properties were evaluated for the various resin and catalyst concentrations. For DMU, the effect of different catalysts, $MgCl_2$ and $NH_4Cl$, were also compared. DMU treated fabrics showed in crease recovery angle, tensile strength and tearing strength but drastic decrease in abrasion resistance. DMDHEU and MDMDHEU treated fabrics were similar in most physical properties. However, DMDHEU treated fabrics were better in crease recovery angle and stiffness, and MDMDHEU treated fabrics were better in tensile strength, tearing strength and abrasion resistance. For a given resin system, crease recovery angle, tensile strength and stiffness increased with a increase in resin concentration. Tearing strength showed very little change, while abrasion resistance was decreased significantly as the crease recovery angle was increased. For the treatment of DMU, $MgCl_2$ catalyst was much better than $NH_4Cl$ in all physical properties. When $NH_4Cl$ catalyst was used, strength reduction and discoloration were observed. As the catalyst concentration increased, crease recovery angle, stiffness were increased. Tensile strength and tearing strength were increcased than control but at high catalyst concentration, the strength were decreased and abrasion resistance was significantly lowered. DMDHEU and MDMDHEU were more sensitive to catalyst concentrations than DMU.

• 한국식품영양과학회지
• /
• 제23권2호
• /
• pp.328-332
• /
• 1994

The purpose of present paper is to compare and analyze the quality of imported Chinese products with the Korean local products in terms of proximate composition, character of external appearance , ingredient composition of dried bracken , dried radish cubers, meju , dried pollack, dried mussel , and dried brown seaweed(Undaria puinnatidifida) which were imported between Oct., and Dec. 1992 and distributed in the market. Moisture recovery of dried products resulted in changed shape and incomplete moisture recovery due to an excessive drying in consideration of hygroscopic property in the course of distribution. The amounts of water soluble brown pigment were two times greater in Korean dried pollack and bracken than those of Chinese products. The content of volatile basic nitrogen (VBN) were twice in Chinese dried pollack, and this may be due to foregin odor from a long transport time and distribution process. The contents of aflatoxin in Korean products were not detectable and these of Chinese products were 5 $\mu\textrm{g}$(%) in dried pollack, bracken and radish cuber. the remaining agricultural chemicals were not detectable in all products. Because of poor technique and facilities, the external appearance of Chinese products especially dried mussels and dried pollack were not uniformed in size and color. Discoloration and foregin substance such as hair, dust were checked , Korean products were mostly packed in small size in PP or bag, and Chinese products were packed in bulk size and distributed as a bulk.

• 한국작물학회지
• /
• 제46권2호
• /
• pp.134-138
• /
• 2001

This experiment evaluates wintering ability to maintain green color of lawn grasses during winter and investigates the effects of top dressing of fertilizer on improving green color during regrowth. Kentucky blue-grass could maintain green color and leaf chlorophyll content better than tall fescue and creeping bentgrass in winter. All three grasses in this experiment have shown the excellent wintering ability. In enhancing the recovery of green color at the early stage of regrowth, the mulching effect with rice straw was highly significant for creeping bentgrass. Green color recovery in grasses during its regrowth was better at the top dressing plots than at the plots without top dressing, but when fertilizer application levels were increased, green color in lawn grass did not significantly change. Although green color in tall fescue, Kentucky bluegrass, and Korean lawngrass could be maintained during summer, the green color of creeping bentgrass is reduced significantly with high temperature. Top dressing after winter and mowing improved leaf chlorophyll content and green color in tail fescue and Kentucky bluegrass significantly. However, Korean lawngrass did not respond significantly with increased levels of fertilizer.

• Membrane and Water Treatment
• /
• 제8권2호
• /
• pp.149-160
• /
• 2017

This study investigated effects of NaOH cleaning on the intrinsic permeability of polyvinylidene fluoride (PVDF) membranes and flux recoveries and membrane resistances under various conditions encountered during ultrafiltration in water treatment plants. The NaOH cleaning using 10,000 mg/L NaOH led to discoloration of PVDF membranes and had little effect on water flux. The NaOH cleaning was efficient in removing the fouling layer caused by humic water. However, long filtration induced a fouling layer that was not removed easily by NaOH cleaning. The lower temperature during filtration yielded rapid increases in transmembrane pressure and decreases in NaOH cleaning efficiency. The alkaline cleaning of PVDF changed the membrane properties such as the hydrophobicity and morphology. Foulant properties, operational conditions such as temperature, and chemical agents should be considered for cleaning strategies for PVDF applied in water treatment.

• 대한치과기공학회지
• /
• 제18권1호
• /
• pp.95-115
• /
• 1996

The esthetic factor for the esthetic prosthesis were studied on 300 persons. The praaticipants were 150 students registered under the Deparment of Dental Laboratoy Technology, Jisan Junior College at the present day of June, 1995 and their mothers. The results were as follows; 1. The number of persons with 28 teeth in their oralcatity was highest(P<0.01). They complained that they have only 28 teeth bacaues of the loss(deficiency) fo teeth due to their impacted teeth and dental caries. 2. The presons with feelings of dissatisfaction were large in number(P<0.01). They were dissatisfied with an abnormal tooth form(33.5%), tooth position(31.7%), tooth color(31.1%), and tooth size(3.7%) in order(P<0.01). 3. In their facial form, the most numerous were men with square form and women with ovoid form(P<0.01). Among the whloe number fo facial forms it appeared to decresae in the order of ovoied(41.8%), square(32.7%), square+tapered(20.5%), and tapered form(5%)(P<0.01). In a profile form, the most numerous were men with A form and women with B. Among the whole participants the most numerous were persons with B form and persons with A and C form were next in oder of numbers(P<0.01). 4. In discoloration of teeth, the most numerous were persons who have no discoloration. 5. In the esthetic recovery of anterior prosthesis the color matching of proximal teeth was not correct, but the outline of proximal teeth was to be reproduced correctly. 6. In the diastema of teeth, the number of persons who have no diastema was higher than that of persons who have a disatema(P<0.01) Among the persons who have diastema the most numerous were persons who have a diastema, and next were 2, 4, 3 and 5 diastemas in order. 7. In a meeting point of the midline of the body and the tooth the number of person hanving a meeting point was higher than that of persons who did not fit each other(P<0.01). The bias direction of midline teeth appeared to be affected by chewing direction, prosthesis location, and posterior location. 8. The length and width of teeth in the tooth size were suitable(P<0.01). The number of persons who have central teeth longer than lateral teeth was high(P<0.0). 9. In the results of smile analysis, the line form connected with incisal edge of upper canine were parallel(P<0.01). When smile the location fo upper lips should be in accord with the central area of teeth(P<0.01) and lower lip should be atteched to the edge of anterior teeth in order to be esthetic. 10. Among the number of upper teeth we can see the most numerous were 8 teeth and next were 10, 6 and 12 in order.

• 한국지역사회생활과학회지
• /
• 제23권3호
• /
• pp.317-328
• /
• 2012

In this study, printing was introduced to the common dip-dyeing method of persimmon juice dyeing so as to develop two different colored persimmon juice dyed fabrics with printings of 'jorangmal' patterns (a national monument) instead of producing a plain textile. Following are the results of a comparative study between the persimmon dyed fabric and undyed fabric, both with printings, in terms of its properties, and hand values. Cotton and rayon were chosen as samples and were compared separately. Firstly, the samples showed differences in terms of clarity and visual sensation depending on the presence of persimmon dye, even if the same pattern and color was used. Secondly, the air permeability of two samples improved after persimmon dyeing even though their thickness increased, and their moisture regain increased as well in all humidity conditions. Thirdly, protectiveness against UV increased in dyed samples, and sweat, sunlight, and compound colorfastness improved in printed dye-fabrics compared to plain dyed ones. Therefore, printing proved to be effective in preventing discoloration. Fourthly, tensile linearity and resilience, bending rigidity, compressive linearity and resilience, and shearing stiffness increased more in the dyed samples compared to undyed ones. However, shearing recovery decreased in both dyed fabrics. Fifthly, the result of its hand value showed that Koshi value increased in all samples than undyed ones, whereas Fukurami, Numeri, and Softosa values decreased. Incorporating printing in persimmon dyeing process could expect creative outcomes not only in today's diverse fashion but in areas of arts or crafts as well.