• 미생물학회지
• /
• 제29권3호
• /
• pp.172-178
• /
• 1991

Intracellular purine nucleoside phosphorylase (PNP) from Saccharomyces cerevisiae was partially purified using ammonium sulfate fractionation, heat treatment, a DEAE-Sephadex A-50 anion exchange chromatography and a Sephadex G-100 gel filtration chromatography. The enzyme was purified 20 fold with 3% recovery. The stability of enzyme was kept by addition of inosine and dithiothreitol. The pH optimum was found to be from 6.3 to 7.3 PNP was sensitive to 10mM of $Hg^{2+}$ , $Cu^{2+}$ , and was inactivated completely by 2 mM of p-chloromercuribenzoate and 5,5'-dithiobis (2-nitrobenzoate). The enzyme was capable of catalyzing the phosphorolysis of inosine, deoxyinosine, guanosine, deoxyguanosine and adenosine.

• Journal of Acupuncture Research
• /
• 제17권3호
• /
• pp.188-198
• /
• 2000

Objectives : We perform this study for help to recovery of cervical syndrome by analyzing structural deviation and cervical curvature in upper cervical vertebrae and definiting functional change through cervical body heat change in cevical lesion which is estimated by DITI. Methods : From sep. 1st. 1998 to aug, 31th. 1999, I make an experiment with the 102 OPD patients of this hospital vertebral-joint center, which were judged as a cervical syndrome and confirmed in upper cervical deviation by motion palpation and then were taken cervical simple X-ray and cervical thermograpy. Results : In the classfication of upper cervical deviation, AS deviation took 98% and abnormal cervical curvature took 68%. in the Chief complain neck-shoulder pain took 78%. In the results of DITI, average value of all objects show $032{\pm}0.18$ as a meaning result. Conclusions : In medical treatment of cervical syndrome, this result shows necessity of keeping pace with remedy of upper cervical deviation and medical treatment of functional change and We can learn necessity of detailed assessment through continual clinical examination.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1398-1401
• /
• 2005

The nano/microstructure, the aging response (in T5 heat treatment), and the mechanical/tribological properties of the eutectic regions in squeeze-cast A356 alloy were investigated using nano/micro-indentation and mechanical scratching, combined wit optical microscopy and atomic force microscope(AFM). Most eutectic Si crystals in the A356 alloy showed a modified morphology as fine-fibers. The loading curve for the eutectic region was more irregular than that of the primary Al region due to the presence of various particles of varying strength. In addition, the eutectic region showed lower pile-up and higher elastic recovery than the primary Al region. The aging responses of the eutectic regions in the squeeze-cast A356 alloys aged at $150^{\circ}C$ for different times(0, 2, 4, 8, 10, 16, 24, 36 and 72 h) were investigated. As the aging time increased, acicular Si particles in the eutectic regions gradually came to a fine structure. Both Vickers hardness ($H_V$) and indentation ($H_{IT}$) test results showed almost the same trend of aging curves, and the peak was obtained at the same aging time of 10 h. A remarkable size-dependence of the tests was found. The friction coefficient for the eutectic region was lower than that for the primary Al region.

• 열처리공학회지
• /
• 제18권1호
• /
• pp.3-11
• /
• 2005

Using various thermo-mechanical schedules characterized by varying reheating temperature, deformation temperature and strain, the austenite recrystallization and ferrite refinement of a Nb bearing low carbon steel(0.15C-0.25Si-1.11Mn-0.04Nb) were investigated. For single pass heavy deformations at $800^{\circ}C$, the 40% deformed austenite was not recrystallized while the 80% deformed one was fully recrystallized. Ferrite grains formed in the 80% deformed specimen was not very small compared with those in the 40% deformed specimen, which implied the recrystallized austenite was not more beneficial to ferrite refinement than the non-recrystallized one. In case of deformation in low temperature austenite region, a multi-pass deformation made finer ferrites than a single-pass deformation, as the total reduction was the same, due to more ferrite nucleation sites in the non-recrystallization of austenite for multi-pass deformation. When specimen was deformed at $775^{\circ}C$ that was $10^{\circ}C$ higher than $Ar_3$, the ferrite of about $1{\mu}m$ was formed through deformation induced ferrite transformation(DIFT), and the amount of ferrite was increased with increasing reduction. Dislocation density was very high and no carbides were observed in DIFT ferrites, presumably due to supersaturated carbon solution. By deformation in two phase(50% austenite+50% ferrite) region the very refined ferrite grains of less than $1{\mu}m$ were formed certainly by recovery and recrystallization of deformed ferrites and, a large portion of ferrites were divided by subgrain boundaries with misorientation angles smaller than 10 degrees.

• 대한치과보철학회지
• /
• 제59권2호
• /
• pp.248-260
• /
• 2021

코발트-크롬 합금은 다양한 치과보철물 제작에 이용되고 있고, 다른 합금에 비해 저렴한 가격과 우수한 기계적 특성이 장점이다. 최근, 기존 제작 방식의 단점을 극복하기 위해 적층제조 방식인 선택적 레이저 용융 방법이 보철물 제작에 이용되고 있다. 선택적 레이저 용융 방법의 공정 중 급속 가열과 냉각 과정은 제작된 합금의 미세구조와 결정립을 미세화하고, 기포를 감소시켜 기존 제작 방식에 의한 합금에 비해 기계적 특성을 향상시킨다. 반면, 적층과 급속 가열 및 냉각은 다량의 잔류응력 축적을 초래하는데, 추후 기계적 특성에 악영향을 미칠 수 있다. 따라서, 잔류응력을 제거하기 위해 주로 열처리를 시행하고, 회복과 재결정화에 의한 잔류응력의 감소뿐만 아니라 상변태, 석출물 및 미세구조의 균질화가 동반되어 기계적 특성의 복잡한 변화가 나타난다. 본 문헌고찰에서 코발트-크롬 합금의 제작 방식 비교 및 선택적 레이저 용융 방법으로 제작된 합금의 특징에 대해 알아보고자 한다.

• 열처리공학회지
• /
• 제36권1호
• /
• pp.7-14
• /
• 2023

We investigated the effect of multiple tempering on the microstructure and mechanical properties of AISI 4340 steel. The austenitized and quenched AISI 4340 steels were tempered at 550, 600, and 650℃ for 1, 2, and 4 h by single-tempering (ST). The multiple tempering was conducted for 4 h by double-tempering (DT, 2 h + 2 h), and quadruple-tempering (QT, 1 h + 1 h + 1 h + 1 h). As tempering temperature increases, yield strength and ultimate tensile strength decrease and elongation increases due to recovery and recrystallization of martensite and coarsening of carbides. At 550℃, as the number of tempering cycles increases, the yield strength and tensile strength decrease at the expense of fracture elongation. At 600 and 650℃, the yield strength and tensile strength increase with increasing the number of tempering cycles while fracture elongation maintains similar values. The multiple tempering at the same tempering time of 4 h improves the modulus of toughness at all tempering temperatures, which is presumed to be due to the change in carbide precipitation behavior by multiple tempering.

• Corrosion Science and Technology
• /
• 제22권6호
• /
• pp.435-446
• /
• 2023

Corrosion behaviors of laser-welded super duplex stainless steel (SDSS) tubes after exposure to an actual power plant environment for one year and those of fin-tube welded SDSS were evaluated. Results showed that corrosion damage on the back side of the SDSS tube in the direction of hot air was higher than that on the front side regardless of weldment location. However, corrosion damage showed no difference between weldment and base metal due to recovery of phase fraction in the weldment through post weld heat treatment (PWHT). Nevertheless, the SDSS tube showed severe corrosion damage along grain boundary due to surface phase transformation (δ → γ) and Cr₂N precipitation caused by PWHT with a high N₂ atmosphere. Corrosion resistance of the SDSS tube was recovered when degraded surface was removed. Corrosion sensitivity of a fin-tube increased significantly due to pre-existing crevice, unbalanced phase fraction, and σ phase precipitation adjacent to the fusion line. Although corrosion resistance was improved by recovered phase fraction and sufficient dissolution of σ phase during PWHT, corrosion reaction was concentrated at the pre-existing crevice. These results suggest that welding conditions for fin-tube steel should be optimized to improve corrosion resistance by removing pre-existing crevice in the weldment.

• 대한한방내과학회지
• /
• 제19권2호
• /
• pp.438-450
• /
• 1998

Pleural effusion means the inflammation of pleura which has a majority of respiratory disease. The main clinical manifestation is pleural effusional pain, dyspnea, cough, fever, etc. and at present the Tuberculous pleural effusion has the most frequency in which exists exudate in our country. And during studying oriental medical treatment about Tuberculous exudative pleural effusional patient, we found the clinical case about The Combination therapy of Chinese traditional and Western medicine at journal of traditional Chinese Medicine and considered it would be help in oriental medical treatment, so we adjust and report now. This study was performed by analyzing the six papers reported centering around the clinical case of The Combination therapy of Chinese traditional and Western medicine in journal of traditional Chinese Medicine published between 1990-1996. As these papers have no mistakes on diagnosis because it obtained pleurocentesis, tuberculin test positive reaction on choicing clinical case, definite results on X-ray, ultrasound as well as clinical basis, so it considers an apt conclusion. The results were as follows: 1. Western medical treatment uses chemical remedy same with pulmonary tuberculosis, and in case of tubercular pleuritis, it needs thoracic duct pyorrhea, and according to simple exudation also operates therapheutic pleural paracentesis. 2. In case of hydrothorax absorption about tuberculous pleural effusion, prescription of purge the heat accumulated in the lung and eliminate the retention of fluid with powerful purgatives shows considerable effects. 3. The latter period treatment of tuberculous pleural effusion needs Supplement qi and active the collaterals, Nourishing yin and clearing heat in addition to Supporting healthy energy to eliminate evils. 4. In case of curing tuberculous pleural effusion, The Combination therapy of Chinese traditional and Western medicine shows more considerable effect than single western medical treatment in absorption of hydrothorax. 5. In case of curing tuberculous pleural effusion, The Combination therapy of Chinese traditional and Western medicine shows more considerable effect than single western medical treatment in prevention of disease reappearance. 6. In case of curing tuberculous pleural effusion, The Combination therapy of Chinese traditional and Western medicine shows more considerable effect than single western medical treatment in vitality recovery at the latter period of disease.

• Archives of Plastic Surgery
• /
• 제32권4호
• /
• pp.408-415
• /
• 2005

Following a transverse rectus abdominis musculocutaneous(TRAM) flap breast reconstruction, denervated state of the flap causes the flap skin prone to thermal injury, calling for special attention. During the last 5 years, 69 breast reconstruction with 72 free TRAM flaps, were performed. Four out of thesse 69 patients sustained burn injury. Heat sources were a warm bag(n=2), heating pad(n=1) and warming light (n=1). The thermal injuries occured from 2 days to 3 months following the reconstruction. Three patients healed with conservative treatment, but one patient required debridement and skin graft. Initially 3 out of 4 patients with the burn had shown superficial 2nd degree burn with small blebs or bullae. However all 4 patients healed with scars. Mechanism of burn injuries of the denervated flap are known to be resulting from; 1) loss of behavioral protection due to denervation of flap with flap elevation and transfer, 2) loss of autonomic thermoregulatory control with heat dissipation on skin flap vasculature contributing to susceptibility of burn injury. 3) changes of immunologic and normal inflammatory response increasing thromboxane, and a fall in substance P & NGF (nerve growth factor). Including the abdominal flap donor site, sensory recovery of the reconstructed breast varies individually from 6 month even to 5 years postoperatively. During this period, wound healing is delayed, resulting in easier scarring compared to that observed in the sensate skin. Patients should be carefully informed and warned of possible burn injuries and taught to avoid exposure to heat source at least until 3 years postoperatively.

• Archives of Plastic Surgery
• /
• 제32권4호
• /
• pp.403-407
• /
• 2005

Following a transverse rectus abdominis musculocutaneous(TRAM) flap breast reconstruction, denervated state of the flap causes the flap skin prone to thermal injury, calling for special attention. During the last 5 years, 69 breast reconstruction with 72 free TRAM flaps, were performed. Four out of thesse 69 patients sustained burn injury. Heat sources were a warm bag(n=2), heating pad(n=1) and warming light (n=1). The thermal injuries occured from 2 days to 3 months following the reconstruction. Three patients healed with conservative treatment, but one patient required debridement and skin graft. Initially 3 out of 4 patients with the burn had shown superficial 2nd degree burn with small blebs or bullae. However all 4 patients healed with scars. Mechanism of burn injuries of the denervated flap are known to be resulting from; 1) loss of behavioral protection due to denervation of flap with flap elevation and transfer, 2) loss of autonomic thermoregulatory control with heat dissipation on skin flap vasculature contributing to susceptibility of burn injury. 3) changes of immunologic and normal inflammatory response increasing thromboxane, and a fall in substance P & NGF (nerve growth factor). Including the abdominal flap donor site, sensory recovery of the reconstructed breast varies individually from 6 month even to 5 years postoperatively. During this period, wound healing is delayed, resulting in easier scarring compared to that observed in the sensate skin. Patients should be carefully informed and warned of possible burn injuries and taught to avoid exposure to heat source at least until 3 years postoperatively.