• KIEE International Transactions on Power Engineering
• /
• 제11A권4호
• /
• pp.39-44
• /
• 2001

As electric power systems have been moving from vertically integrated utilities to a deregulated environment, the charging of reactive power management is a new challenging them for market operators. This paper proposes a new methodology to compute the costs of providing reactive power management service in a competitive electrical power market. The proposed formulation, which is basically different from those shown in the literature, consists of two parts. One is to recover investment capital costs of reactive power supporting equipment based on a reactive power flow tracing algorithm. The other is to recover operational costs based on variable spot prices using the optimal power flow algorithm. The charging shapes resulted from the proposed approach exhibit a quite good meaning viewed from a practical sense. It turns out that reactive power charged are mostly due to recovery of capital costs and slightly due to recovery of operational costs. The methods can be useful in providing additional insight into power system operation and can be used to determined tariffs of a reactive power management service.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.804-809
• /
• 2004

It is essential to calibrate a camera in order to recover 3-dimensional reconstruction from uncalibrated images. This paper proposes a new technique of the camera calibration using a homography between the planar patterns image taken by the camera, which is located at the three planar patterns image. Since the proposed method should be computed from the homography among the three planar patterns from a single image, it is implemented more easily and simply to recover 3D object than the conventional. Experimental results show the performances of the proposed method are the better than the conventional. We demonstrate the examples of 3D reconstruction using the proposed algorithm from image sequence.

• 설비공학논문집
• /
• 제16권6호
• /
• pp.514-521
• /
• 2004

Waste heat recovery system was studied numerically and experimentally. Heat exchanger system was designed specially to obtain the optimum heat exchanging performance. Brushwood biomass was used for the present experimental study. Two biomass heat recovery systems were designed and developed. Polyethylene helical pipe line of 0.03 m (inner diameter) was installed to recover the heat of biomass dump. The fermentation process of biomass dump was maintained for 12 weeks. The inner average temperature of biomass was about 51$^{\circ}C$ for both hot exchanger systems. The current heat recovery system could recover up to 6 ㎉/kg of energy.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.287-292
• /
• 2002

This paper presents a reverse engineering method for compound surfaces using vision system. A CNC machining center is used as a measuring station, which is equipped with slit beam generator and vision probe. Since obtained data using slit beam or laser scanner may have much data loss along the edge of compound surfaces, an algorithm is presented in this study to recover missing geometric data at such region. First, b-spline interpolation is applied to extract edge information of the surface, and as a next step, b-spline approximation is applied to recover the missing geometric data. Finally, b-spline skinning method is applied to regenerate the surface information. Appropriate simulation and experimental works are preformed to very the effectiveness of the proposed methods.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1999년도 특별강연 및 추계학술발표대회 개요집
• /
• pp.297-298
• /
• 1999

Cemented carbides material (WC-Co hard alloy) were recognized very important and expensive tool or die assembly parts because of compose for the main elements of rare metal (W and Co etc). This research was developed to separate and recover of WC fine powder contained by WC-Co materials. Recycling process was a new method named by the Tin impregnation for decobaltification on cemented carbides. This reaction occurred to product a brittle Co-Sn intermetallic compounds, thereafter it carried out by acid cleaning solution and physical milling or powdering. New process was able to recover about 60％ WC fine powder from 1 to 5 ${\mu}{\textrm}{m}$.

• 융합신호처리학회논문지
• /
• 제12권3호
• /
• pp.176-180
• /
• 2011

Even though algorithms for watermark embedding and extraction step are important issue for digital watermarking, watermark selection and post-processing can give us an opportunity to improve our algorithms and achieve higher performance. For this reason, we summarized the possibilities of improvements for digital watermarking by referring to the watermark merging techniques rather than embedding and extraction algorithms in this paper. We chose Cox's function as main embedding and extraction algorithm, and multiple barcode watermarks as a watermark. Each bit of the multiple copies of barcode watermark was embedded into a gray-scale image with Cox's embedding function. After extracting the numbers of watermark, we applied the watermark merging techniques; including the simple merging, N-step iterated merging, recover merging and combination of iterated-recover merging. Main consequence of our paper was the fact of finding out how multiple barcode watermarks and merging techniques can give us opportunities to improve the performance of algorithm.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권5호
• /
• pp.41-46
• /
• 2015

Three types of experiments, based on the physical properties of oily sludge landfilled soil, were conducted to recover total petroleum hydrocarbons (TPH) from the soil. These experiments included gravity separation, solvent extraction using water, and air floatation. The oil portion was not easily separated from the wet (raw) soil because water molecules aggregate the soil particles, despite the fact that the soil was sandy. However, the drying and grinding processes destroyed the aggregates, causing the TPH recovery to increase to approximately 60% when air floatation was used. The drying process decreased the specific gravity of the soil sample, thereby enhancing the overall recovery of TPH from the soil. Although thermal desorption and/or incineration are common choices for heavily dumped sites, physical separation can recover the oil portion instead of simply removing it.

• 무역상무연구
• /
• 제16권
• /
• pp.59-81
• /
• 2001

There are two methods of quantifying the damages when the contract is avoided. One is 'concret' assessment, the other is 'abstract' assessment. The former looks to the actual cost incurred by the aggrieved party in concluding a contract for the substitute transaction, while the latter is based on the market price. The concrete method of assessment forms the starting point in the Civil Law systems. In the Common Law systems, it is likewise available. The aggrieved party is entitled to recover the difference between the cost of cover or (as the case may be) the proceeds of resale and the contract price. Both systems also recognize the abstract method of assessment. If the aggrieved party does not resell or cover, damages are equal to the difference between the price fixed by the contract and the market price. The CISG and the UNIDROIT Principles recognize expressly both concrete and abstract methods. Under the relevant articles, the aggrieved party can recover the damages assessed by one of the methods as well as any further damages such as loss of profit, incidental and consequential damages.

• 한국농촌건축학회논문집
• /
• 제11권4호
• /
• pp.67-74
• /
• 2009

Jeju Topdong is a seashore but there are no relations to the waterfront. Since Topdong was developed and reclaimed by the capitalistic system so that topdong have a lot of problems as a waterfront. First of all, Topdong has no water-familiar as a waterfront that is because of high level concrete breakwater. And also Topdong has no identity in seashore buildings which are composed by fish restaurants, seashore theater, shops, hotels and otherwise buildings. From the above critical mind, in this study look to process of reclamation of Topdong and examine the current situations and problems. To recover water-familiar of Topdong, this study examine the case study on abroad waterfront cases and refer to these abroad cases for establishing desirable waterfront model of Topdong. From the analysis, this study propose the waterfront elements and schematic alternative plan for Jeju Topdong in order to recover the water-familiar as a waterfront and a seashore.

• 제어로봇시스템학회논문지
• /
• 제14권4호
• /
• pp.399-405
• /
• 2008

Recently, robot technology is actively going on progress to the field of various services such as home care, medical care, entertainment, and etc. Because these service robots are in use nearby person, they need to be operated safely even though hardware and software faults occur. This paper proposes a Fault-Tolerant middleware for a robot system, which has following two characteristics: supporting of heterogeneous network interface and processing of software components and network faults. The Fault-Tolerant middleware consists of a Service Layer(SL), a Network Adaptation Layer(NAL), a Network Interface Layer(NIL), a Operating System ion Layer(OSAL), and a Fault-Tolerant Manager(FTM). Especially, the Fault-Tolerant Manager consists of 4 components: Monitor, Fault Detector, Fault Notifier, and Fault Recover to detect and recover the faults effectively. This paper implements and tests the proposed middleware. Some experiment results show that the proposed Fault-Tolerant middleware is working well.