• 전기학회논문지
• /
• 제59권11호
• /
• pp.2043-2047
• /
• 2010

This study is to solve problems of depletion of RF bandwidth frequency, confusion possibility, security that current wireless communications system have and is to confirm possibility of applying next generation network. To solve problems of current wireless communications system, visible light communications system for power line communications using ATmega16 Microcontroller is was realized and receiver property was analyzed. PLC exclusive chip APLC-485MA, Microcontroller ATmega16, 5pi bulb type LED and high flux LED, visible light receiving sensor LLS08-A1 were used for transmitter and receiver. Performance was analyzed by designed program and an oscilloscope. It was showed average 20% improved receiver rate rather than bulb type LED in the case of high flux LED through voltage change rate on communication distance and LED type of distance between 10 to 50 cm. The blue LED showed the best performance among measured LED types with above 10% of voltage decreasing rate. But As it gradually becomes more distant, the precise date was difficult to obtain due to weak light. To overcome these sort of problems, specific values such as changing conditions and efficiency value relevant to light emitting parts and visible light receiving sensor should be calculated and continuous study and improvements should also be accomplished for the better communications condition.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.703-705
• /
• 2016

본 논문에서는 광대역 특성을 갖는 이동통신 RF 모듈의 수동 혼변조 왜곡신호를 측정할 수 있는 시스템을 개발하였다. 광대역 특성을 나타내기 위하여 RF 수신단에서 저 잡음 특성과 광대역 특성을 만족하는 수신기를 설계하였으며 RF 수신 단에서 넓은 동적영역(high dynamic range)을 나타내도록 하였다. 설계된 수동 혼변조 왜곡 측정시스템에서 FPGA/DSP를 적용하여 측정된 PIMD신호를 PC에 기록하도록 프로그램 하였다. 650MHz-2700MHz 까지 가변하여 제3차 혼변조 왜곡신호를 측정하여 최고 -138dB를 나타내었다.

• 제어로봇시스템학회논문지
• /
• 제13권10호
• /
• pp.956-961
• /
• 2007

We propose a new distance measurement method and local positioning system for the autonomous mobile robots localization. The distance measurement method is able to measure long-range distances with a high accuracy by using ultrasonic sensors. The time of flight of the ultrasonic waves include various noises is calculated accurately by the proposed period detecting method. The proposed local positioning system is composed of four ultrasonic transmitters and one ultrasonic receiver. The ultrasonic transmitter and receiver are separated but they are synchronized by RF (Radio frequency) signal. The proposed system using ultrasonic waves is represented as USAT(Ultrasonic Satellite System). USAT is able to estimate the position using the least square estimation. The experimental results show that the proposed local positioning system enables to estimate the absolute position precisely.

• 한국정보통신학회논문지
• /
• 제7권4호
• /
• pp.623-629
• /
• 2003

본 논문은 CATV 망 관련 장치 구현에 관한 것으로 기존의 수동형 장치의 비효율성을 제거하기 위해 자동화된 집중식 Headend 시스템 및 분배장치를 구현하였다. 이를 위해 기존의 주파수대역 중에서 비디오 신호의 송신에 사용되지 않은 대역을 확보하고 이를 제어신호의 송ㆍ수신이 이루어지는 제어대역으로 사용하는 송수신 시스템 및 자동화 분배기를 설계하였으며, 상ㆍ하향통신 및 하향통신방식이 공유된 형태로 RS-232를 이용한 9600bps의 CATV 망을 위한 통합관리 시스템을 구현하였다.

• 한국통신학회논문지
• /
• 제27권6B호
• /
• pp.569-578
• /
• 2002

This paper proposes a new multicarrier code division multiple access (CDMA) system. The proposed multicarrier CDMA system provides the advantages that the transmission bandwidth is more efficiently utilized by using divided spreading sequence, time and frequency diversity is achieved in frequency selective nultipath (acting channel, and inter-carrier interference (ICI) can be minimized by using specific data and code pattern. In this system, transmitted data bits are serial-to-parallel converted to some parallel branches. On each branch each bit is direct-sequence spread-spectrum modulated by divided spreading sequences and transmitted using orthogonal carriers. The receiver providers a Rake for each carrier, and the outputs of Rakes are combined to get time and frequency diversity. This multicarrier CDMA system allows additional flexibility in the choice of system parameters. Upon varying system parameters, bit error rate (BER) performance is examined for the proposed multicarrier CDMA system. Simulation results show that the proposed multicarrier CDMA scheme can achieve better performance than the other types of conventional multicarrier CDMA systems.

• ETRI Journal
• /
• 제26권2호
• /
• pp.71-82
• /
• 2004

We introduce a high-definition three-dimensional television (3DTV) broadcasting system that is fully compatible with the existing transmission system of high-definition television (HDTV). Specifically, we developed high-definition 3DTV broadcasting subsystems including a 3DTV camera, 3DTV video multiplexer and demultiplexer, 3DTV receiver, and 3DTV outdoor broadcast van. To verify the developed subsystems, we performed experimental services of 3DTV broadcasting during the 2002 FIFA World Cup Korea/Japan. According to our subjective evaluation test, 88% of 273 viewers rated the perceived depth of 3DTV as “Good,” and 36% of the viewers preferred 3DTV to other digital broadcasting services.

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.63-70
• /
• 1994

This paper presents manufacturing and evaluation of a non-contact rotational torque measurement system which consists of torque cell, telemeter system, transmitter and receiver coil, transmitter, receiver and telemeter indicator. Static calibration test results show that the system has a maximum uncertaintry of 05% or less. A standar calibration system for rotational torque is used to evaluate the measurement system, As a result, the maximum uncertainty for measuring rotational torque by this system is 2% or less. We may conclude that the measurement system is sufficient to measure rotational torque of shaft in industry.

• 한국멀티미디어학회논문지
• /
• 제21권5호
• /
• pp.545-557
• /
• 2018

The Global Positioning System (GPS) has become popular and widely used in many fields from military to civilian applications. However, GPS signals are suffered from interference due to its weak signal over wireless channel. There are many types of interference, such as jamming, blocking multipath, and spoofing, which can mislead the operation of GPS receiver. In this paper, vector-based tracking loop model with integrity check is proposed to detect and mitigate the harmful effect of interference on GPS receiver operation. The suggested methods are implemented in the tracking loop of GPS receiver. As a first method, integrity check with carrier-to-noise ratio (C/No) monitoring technique is applied to detect the presence of interference and prevent contaminated channels out of tracking channels to calculate position. As a second method, a vector-based tracking loop using Extended Kalman Filter with adaptive noise covariance according to C/No monitoring results. The proposed methods have been implemented on simulated dataset. The results demonstrates that the suggested methods significantly mitigate interference of Additive White Gaussian Noise (AWGN) and improve position calculation by 44%.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.157-160
• /
• 2008

Solar receiver in the solar power tower system has a similarity to a boiler of the thermal power plant in many aspects. However Boiler is operated long time without stopping while solar receiver repeats start and stop every day. The objective of this study is to investigate start-up characteristics of solar receiver. The experimental device was constructed in a bench scale. Basic experimental condition of water/steam was set by 25 bar and $223^{\circ}C$. Initially, the heat was added into risers only, then another experiment with input into drum additionally was done. When the heat flux was valid only risers, it took about 300 minutes until the water temperature in drum reached $223^{\circ}C$. Water temperature of drum was increased by $44^{\circ}C$/hr with 91.14 g/s of water circulation. With additional heat input into drum, 200 minutes was required to reach $223^{\circ}C$. In this case temperature was increased $66^{\circ}C$/hr with 96.5 g/s of water circulation.

• 한국전자파학회논문지
• /
• 제29권7호
• /
• pp.500-507
• /
• 2018

본 논문에서는 유 무인항공기 추적 등에 사용이 가능하며, 전송속도가 최대 274 Mbps에서도 추적이 가능한 3채널 RF 모노펄스 수신기에 대해 설계하였다. 통신용 신호를 이용한 모노펄스 수신기는 Ku-대역으로 설계되었으며, 하향 변환모듈, 신호 처리 모듈로 구성된다. 제안된 RF 모노펄스 수신기의 성능을 만족시키기 위해 전송속도에 따른 전송속도별 수신감도의 신호처리 기능이 구현되었고, 이를 위해 다양한 대역폭의 신호 수신 및 상호 주파수 간섭을 최소화하기 위하여 2종의 RF 필터로 구성된 수신기 구조를 적용하였다. 시스템 요구사항의 만족 여부를 확인하기 위해 AWR 시뮬레이션 툴을 이용하였다.