• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.203-207
• /
• 2010

In this paper, The design and implementation of Multi Channel Receiver is described in this paper. This Receiver system operates at X-band with processing received signal, more than 80[dB] dynamic range and wide-band signals at the same time. To process direct received signals, this system has the built-in Digital De-modulators which offer the minimum loss on the receiving signal pass and has high stability by adding Built-In Test (BIT). The performance of Multi Receiver is the following. The gain, noise figure, difference of amplitude and phase on the signal pass is respectively $14{\pm}2[dB]$, 19[dB], ${\pm}2[dB]$, and $10^{\circ}$ below.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.12-19
• /
• 2014

In this paper, an advanced UWB (ultra wideband) Rake receiving technique based on the statistical distribution model is studied in the M-ary TH-PPM system with multiple access interference (MAI). In order to improve the performance of the Rake receiver, the stochastic model, which can flexibly express the behavior of MAI-plus-noise, is required and the Laplace distribution and the generalized normal Laplace (GNL) model applied by the curtosis matching method are considered. The performance of Rake receiver based on each probability distribution is evaluated in the IEEE multipath fading channel and compared to that of the conventional Rake receiver. The suggested approach shows a superior BER performance than that of conventional Rake receiver.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7A
• /
• pp.674-681
• /
• 2006

In this paper, a new receiver with low complexity for a DS-UWB system which can eliminate efficiently the multiple access interference and the detrimental effects caused by multi-paths is proposed. The performance of conventional DS-UWB receivers depends greatly on the types and lengths of spreading codes. Generally, as the length of spreading codes increases, the receiver performance improves. But, the receiver performance does not improve satisfactorily in a multi-paths fading environment. Through computer simulations, it can be shown that the proposed DS-UWB receiver eliminate the multi-paths effects efficiently in a multi-user, multi-paths fading environment, and the user capacity can be increased dramatically using the proposed receiver.

• Journal of Navigation and Port Research
• /
• v.31 no.10
• /
• pp.859-864
• /
• 2007

In the future, it is necessary that using the Satellite-based radio navigation augmentation system such as Differential Global Positioning System(DGPS) to achieve a position accuracy of sub-meter level in port. Generally, the receiver for DGPS reference station should meet performance specifications of RSIM Ver. 1.1 presented by RTCM. This paper proposes a method to verify performance of the receiver for DGPS reference station according to the RSIM Ver. 1.1. And this paper presented that performance evaluation of the commercial receiver for DGPS reference station through the proposed method is satisfied with RSIM Ver. 1.1.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.197-200
• /
• 2000

In this paper, The RF system of W-CDMA receiver is designed and the performance is analyzed. The linearity characteristic and the noise characteristic are presented in the performance. The linearity characteristic is analyzed by PN and IIP3. The noise characteristic is analyzed by NF. In addition, sweeping of the nonlinear components parameter affecting the linear performance is tested and the most maximal possible parameter to maintain the linear performance is introduced. The transceiver RF system of W-CDMA and cdma2000 is designed and presented adapting the nonlinear parameter introduced.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.97-100
• /
• 2001

The performance of mobile radio communication system is dependent on various factors such as channel environment. Especially, the number of multipath components of mobile radio channel and multipath delay property in CDMA system for different bandwidths are changed. Therefore, using multipath components, Rake receiver provides improvement of performance of W-CDMA system is evaluated by computer simulation over the types of ITU-R wideband channel model and spreading rate. The result shows that the performance of CDMA adapting RAKE receiver is Improved by the increase of multipath components in equal level of the received power.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.6
• /
• pp.1133-1138
• /
• 2010

We have developed an imaging radiometer system at W-band. The system consists of lens, reflector, 30-ch receiver array, scanner, and signal processor. One receiver consists of a dielectric rod antenna, a balun, LNA(low noise amplifier) and a detector. The system configuration requirements are described. Finally, we represent radiometer images to obtain through clouds, smoke, dust, and other obstructions which render visible and IR systems ineffective.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.238-244
• /
• 2008

A numerical and experimental studies are carried out to investigate the heat transfer characteristics of 5kWth dish-type solar air receiver. Measured solar radiation and temperatures at several different locations are used as boundary conditions for numerical simulation. Many parameters' effects (reflectivity of the reflector, the thermal conductivity of the receiver body, transmissivity of the quartz window, etc.) on the thermal performance are investigated. Discrete Transfer Method is used to calculate the radiation heat exchange in the receiver. A heat transfer model is developed and the rate of radiation, convection and conduction heat transfer are calculated. Using the numerical model, the heat transfer characteristics of volumetric air receiver for dish-type solar thermal systems are known and the thermal performance of the receiver can be estimated.

• New & Renewable Energy
• /
• v.4 no.4
• /
• pp.72-79
• /
• 2008

A numerical and experimental studies are carried out to investigate the transient heat transfer characteristics of 5kWth dish type solar air receiver. Measured solar radiation and temperatures at several different locations are used as boundary conditions for numerical a. Many parameters' effects (reflectivity of the reflector, the thermal conductivity of the receiver body, transmissivity of the quartz window, etc.) on the thermal performance are investigated. Discrete Transfer Method is used to calculate the radiation heat exchange in the receiver. A transient heat transfer model is developed and the rate of radiation, convection and conduction heat transfer are calculated. Comparing of the experimental and the numerical results, results of both are in good agreement. Using the numerical model, the transient heat transfer characteristics of volumetric air receiver for dish type solar thermal systems are known and the transient thermal performance of the receiver can be estimated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.867-875
• /
• 2005

In this paper, we fabricated along distance wireless communication transmitter and receiver over the 100 which used NRD technology. To make the transmitter and receiver of 400Hz band using the non radiative dielectric wave guide, transmitter was composed of gm oscillator, m modulator and antenna, receiver was composed of local gum oscillator, balanced mixer, 3dB direction coupler and antenna. Also we executed a wireless communication image transmission examination to the transmitter and receiver. We receive the image information in real-time data transmission from receiver after we send the image signal in the wireless distance of the 10km. Therefore, the 400Hz band U transmitter and receiver to be developed will be used widely for the transmission system CATV or broadband transmission system. This will be utilized also to the link device of a long distance high speed wireless communication network.