• 전기전자학회논문지
• /
• 제14권4호
• /
• pp.283-290
• /
• 2010

본 연구는 광통신을 위한 10Gbps CMOS 수신기 회로 설계에 관한 것이다. 수신기는 포토다이오드, 트랜스임피던스 증폭기, 리미팅 증폭기, 등화기, 클락 및 데이터 복원 회로, 디멀티플렉서, 기타 입출력 회로 등으로 구성돼있다. 여러 광대역 혹은 고속 회로 기법을 써서 SONET OC-192 표준용 광통신에 적합한, 효과적이고 신뢰성 있는 수신기를 구현하고자 하였다.

• Journal of electromagnetic engineering and science
• /
• 제4권2호
• /
• pp.63-67
• /
• 2004

DAM(Delay-And-Multiplier) intercept receiver usually detects the symbol rate of the transmitted DS spread spectrum signal for the feature extraction. It is important for secure communication to reduce the normalized output signal-to-noise ratio that is generated at the DAM intercept receiver as a measure of detectability. In this paper, several kinds of chip waveforms are novelly analyzed for LPI(Low-Probability of Intercept) communication against DAM intercept receiver. Consequently, it is shown that the rectangular chip waveform shows the best LPI performance in the bandwidth of 2/$T_c$TEX>, 4/$T_c$TEX>, and 6/$T_c$TEX>/. Except the rectangular waveform, kaiser chip waveform show better LPI performance than the other waveforms in the bandwidth of 4/$T_c$TEX> and 6/$T_c$TEX>.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.395-398
• /
• 2006

In this paper, for implementing a real-time software GNSS receiver we propose the highly efficient and fast algorithms such as partial down-conversion, phase rotator, composite I&Q accumulation, Virtual DCO technique, and parallel acquisition using FFT. When the proposed algorithms are used, more 30 tracking channels with 3 tracking arm(early-prompt-late) is operated real-time on Intel 2.8GHz personal computer. Also, the partial down-conversion reduces the FFT size, for parallel acquisition, to 1/8 of conventional FFT-size and the program size includes map is not exceed 1Mbyte. Finally, the proposed real-time software GNSS receiver using the proposed algorithms provides the navigation solution with below 10 meter rms error.

• 한국통신학회논문지
• /
• 제17권11호
• /
• pp.1238-1246
• /
• 1992

정지기상위성의 거리측정신호를 이용한 시각비교 시스템을 개발하였다. 이 시스템을 이용한 당 연구원 세슘원자시계와 GMS 신호와의 시각비교측정결과 10 ns 정도의 시각비교 정밀도를 나타내었다. 또한 보다 높은 정확도의 시각비교를 위해 운반가능한 GMS 수신기를 이용하여 일본 통신연구소의 GMS 수신기와 한국표준과학연구원의 GMS 수신기사이의 지연시간을 교정하였다.

• 한국정보처리학회논문지
• /
• 제6권2호
• /
• pp.396-407
• /
• 1999

A Multicast transfer is a critical delivery method to provide a transport service to multipeer applications, the various problems on the multicast transfer environments have been occurred from the results of current research. One of these problems is the multicast transport service issue to guarantee reliability and scalability. First, this paper presents the related research of the reliable multicast transport methods, and then proposes a new transfer architecture using the Agent Sender and Receiver Concept(ASRC) to solve a reliable multicast transfer issue. we also propose a method to apply the proposed architecture(ASRC) to the well-known sender-initiated and receiver-initiated transport protocol. In order 새 validate the proposed ASRC architecture, t도 applied sender and receiver system si compared and analyzed over the processing requirement and maximum throughput.

• ETRI Journal
• /
• 제34권2호
• /
• pp.147-158
• /
• 2012

In this paper, we present a demodulation structure suitable for a reader baseband receiver in a passive radio frequency identification (RFID) environment. In a passive RFID configuration, an undesirable DC-offset phenomenon may appear in the baseband of the reader receiver, which can severely degrade the performance of the extraction of valid information from the received tag signal. To eliminate this DC-offset phenomenon, the primary feature of the proposed demodulation structures for the received FM0 and Miller subcarrier signals is to reconstruct the signal corrupted by the DC-offset phenomenon by creating peak signals from the corrupted signal. It is shown that the proposed method can successfully detect valid data, even when the received baseband signal is distorted by the DC-offset phenomenon.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.517-520
• /
• 2000

This paper deals with the statistical analysis of an autocalibration procedure for the gain and phase imbalances between the in-phase (I) and quadrature (Q) components in quadrature receivers. In real implementation, the imbalances of the gain and phase exist and degrade the performance of the receiver. In this paper we investigate the statistical characteristic of the estimates in an on-line imbalance estimation method for the receiver under the assumption of an additive white Gaussian noise environment.

• 한국태양에너지학회 논문집
• /
• 제24권4호
• /
• pp.11-18
• /
• 2004

A solar concentrator, named KIERDISH II, was built at KIER in order to investigate the feasibility of high temperature solar energy application system. The constructed concentrator is a dish type solar concentrator with a focal length of 4.68m and a diameter of 7.9m. To successfully operate KIERDISH II, optimal design of the absorber is very important and flux density distribution has to be known. The focal flux density distribution on the receiver was measured. We have observed the shape and size of flux images and evaluated percent power within radius. Flux density distribution is usually measured by a CCD(charge coupled device) camera and a radiometer. In this paper we present a flux mapping method to estimate the characteristic features of the flux density distribution in the focal region of solar concentrator. The minimum radius of receiver is found to be 0.15m and approximately 90% of the incident radiation is intercepted by receiver aperture.

• 한국태양에너지학회 논문집
• /
• 제29권4호
• /
• pp.22-27
• /
• 2009

This study focus on verification of the thermal efficiency of volumetric receiver with 5k Wth Dish-type solar thermal system. Spiral flow path shaped on receiver and working fluid(steam) flow along with this flow path. Porous material for radiation-thermal conversion used in former researches are substituted with the stainless steel wall installed along the spiral flow path. Numerical analysis for the flow path and temperature distributions are carried out. Numerical results are compared with experimental data. Using the numerical model, the heat transfer characteristics of spiral type receiver for dish-type solar thermal systems are known and the thermal performance of the receiver can be estimated.

• 제어로봇시스템학회논문지
• /
• 제16권2호
• /
• pp.188-193
• /
• 2010

With GPS being the primary navigation system, Loran use is in steep decline. However, according to the final report of vulnerability assessment of the transportation infrastructure relying on the global positioning system prepared by the John A. Volpe National Transportation Systems Center, there are current attempts to enhance and re-popularize Loran as a GPS backup system through the characteristic of the ground based low frequency navigation system. To advance the Loran system such as Loran-C modernization and eLoran development, research is definitely needed in the field of Loran-C receiver signal processing as well as Loran-C signal design and the technology of a receiver. We have developed a set of Matlab tools, which implement a software Loran-C receiver that performs the receiver's position determination through the following procedure. The procedure consists of receiving the Loran-C signal, cycle selection, calculation of the TDOA and range, and receiver's position determination through the Least Square Method. We experiences the effect of an incorrect cycle selection and various error factors (ECD, ASF, sky wave, CRI, etc.) from the result of the Loran-C signal processing. It is apparent that researches which focus on the elimination and mitigation of various error factors need to be investigated on a software Loran-C receiver. These aspects will be explored in further work through the method such as PLL and Kalman filtering.